The only trouble is getting it out after the cover is closed? 
SZZS specific CEF50-main thread (initial builds and troubleshooting related only)
- Thread starter TCFlowClyde
- Start date
DirtyCurty
New Member
Proto type in the works. Im sure it will be spring loaded and have a decent seal on the cap.
Sure. Watch this video. Sina Visitor System
TCFlowClyde
Active member
- Thread starter
- #2,944
Alright looks like they got the spring to work properly.
Are they selling them to the general public?DirtyCurty
New Member
Not yetAlright looks like they got the spring to work properly.
TCFlowClyde
Active member
- Thread starter
- #2,946
Sure be nice to have the top tube hole in the CEF50 actually be useful!
DirtyCurty
New Member
Yeah that was my concern. I wanted a power button. This tool slot it the solution they are doing. Should be in ready for purchase soon. I will order 2 once avaliable.Sure be nice to have the top tube hole in the CEF50 actually be useful!
Neeko DeVinchi
E*POWAH Elite World Champion
Sorry guys, tried to share a quick clip on the thread showing the CEF50 next to the Specialized Levo. Not too sure why it's not sharing, but I'll try and take pics instead
TCFlowClyde
Active member
- Thread starter
- #2,950
FYI: For peeps waiting for Gen 3 plastic motor guards
Myalteregohamish
Active member
“Hi Linda, yea, I need 7”
Neeko DeVinchi
E*POWAH Elite World Champion
FYI,
New design for the headset cable routing for the CEF50.
It looks similar to the Nukeproof ebike headset.
I'll share with you all my experiences shortly
New design for the headset cable routing for the CEF50.
It looks similar to the Nukeproof ebike headset.
I'll share with you all my experiences shortly
It looks like one better improvement over the Nukeproof is the opening for the display cable!
FYI,
View attachment 129597
New design for the headset cable routing for the CEF50.
It looks similar to the Nukeproof ebike headset.
I'll share with you all my experiences shortly
I like how they give you plugs for unused holes
Neeko DeVinchi
E*POWAH Elite World Champion
My thoughts exactly
temon10
Well-known member
A company that responds very quickly to customer input. Headset, battery case, motor cover, UDH hanger and what else?FYI,
View attachment 129597
New design for the headset cable routing for the CEF50.
It looks similar to the Nukeproof ebike headset.
I'll share with you all my experiences shortly
DirtyCurty
New Member
Frame cable routing instead of through the headset, new frame mounting position to support a coil shock, a place to store a multi tool in the top tube instead of a push button. They can omit the hole on the top tube all together if 25 frames are ordered.
DirtyCurty
New Member
Oh and you can get any custom color.
Just navigating the YS color book is tricky. Different codes for matte or gloss
Is this still happening?
not on mine received last week
FYI,
View attachment 129597
New design for the headset cable routing for the CEF50.
It looks similar to the Nukeproof ebike headset.
I'll share with you all my experiences shortly
New design headset cable routing vs frame cable routing. What would you choose if you had to order new frame now ?
Headset cable routing is a crazy dumb marketing design for the dentist riders. The ONLY benefit is cosmetics. In an eMTB it is suicide. Water gets through the mostly ineffective seals and ruins your bearings and then drips down and destroys your battery. Not to mention how much fun it is to replace a worn cable housing or brake hose.
For me the most important problem is the constraints on cables,. Exemple, you fall down and handelbar turn at 180°. Headset cable routing is good on road bicycle, who never turn more than 90°, but not for E-MTB, where battery leaving lower space for cables movement
Neeko DeVinchi
E*POWAH Elite World Champion
Good question
The cable grommets (at first) did make me question how many cables could be routed through each side of the headtube. But I have seen examples of CEF50's with headtube cable routing on the forum. And no one has expressed any issues.
If I had to build another one, yes. I probably would go headtube cable routing.
But being honest, I've had no drama or problems with headtube cable routing
DirtyCurty
New Member
Few months out i believe
Good question
Good question
View attachment 129709
they perform holes you want. on mine i have 2 cable way on each side
Last edited:
Neeko DeVinchi
E*POWAH Elite World Champion
Curious. Your cable grommets and cable routing is from the top of the downtube. But I was of the belief it would be around the headtube area.
Did you make those cable holes yourself or was that how the frame arrived?
i have request holes to SZZS, i have communicate the dimensions and showed those used on my LCES1075. They have sent the frame with the exact items to pass the cables. I appreciate a lot their reactivity and effiency.
Question for the group.
When a designer determines that a frame is made for XXXmm of travel are they including sag in the design?
In other words is a frame designed for 170mm fork really a 150mm design given a typical 20mm sag?
When a designer determines that a frame is made for XXXmm of travel are they including sag in the design?
In other words is a frame designed for 170mm fork really a 150mm design given a typical 20mm sag?
If you have 25%_ sag in front and rear, it will keep approximately the same geo?
Similar threads
EMTB Forums
Latest articles
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two... -
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s...