Four Flusher
Active member
So if I understand correctly, you put the Ridewrap over the factory film?
Levo Gen 3 Specialized Gen 3 2022 Levo Megathread!
- Thread starter Rob Rides EMTB
- Start date
sometimesjoe
Member
If you held the factory film, unfortunately some dust and powder will get into two films.
I have experience about that on new White Levo. You can see dust inbetween.
You can mitigate this issue pay more attention when you apply new one.
At the end, for me it's better to leave original protection
Luca
I have experience about that on new White Levo. You can see dust inbetween.
You can mitigate this issue pay more attention when you apply new one.
At the end, for me it's better to leave original protection
Luca
Four Flusher
Active member
It's rare that you buy something that's actually a big upgrade from what you already have. Such is the case with my new Levo expert. The bike is magical. I'm 71 year old and I'm tackling stuff that I thought was completely impossible. After two years and two bikes and about 3K miles of single track, I thought that I was about where I'd always be in terms of skill, but not on this bike. It's a monster truck that turns like a Porsche. Coming from XT brakes, I don't love the Code brakes, but my shop got them set up pretty well and for now I'm ok with them.
I've had the bike for ten days and I've logged 150 miles. I'm not very good at figuring out where noises originate so I'm looking for a little help.
When charging down hill on rough track there's little rattle coming from somewhere. It sounds more like something is slapping. I'm heading to my shop but since I can't duplicate it on the pavement, I'm not sure they'll be able to locate the issue, hell, there might not even be an issue.
I've had the bike for ten days and I've logged 150 miles. I'm not very good at figuring out where noises originate so I'm looking for a little help.
When charging down hill on rough track there's little rattle coming from somewhere. It sounds more like something is slapping. I'm heading to my shop but since I can't duplicate it on the pavement, I'm not sure they'll be able to locate the issue, hell, there might not even be an issue.
beutelfuchs
Active member
Typically its the battery. the plastic sleve mounted to its end should really sit tight if you push it up the downtube.
If not check if that piece nr.2 is there:
WatermanJim
New Member
I used a razor blade to cut around the edges of the factory tape, not perfect but looks better.
WatermanJim
New Member
An additional insert sleave #2 is included with the bike and should be with your spare parts.
WatermanJim
New Member
Just took a first short ride on my expert. Front end feels taller and the suspension is butter smooth like a DH bike. Doesn't have the punch in trail or turbo like my gen1 but that's probably the settings. Motor is quiet enough but not quieter than the gen1. The fit and body position are excellent and I felt like I was instantly in the right position to rail turns with the stock settings. On the gen1 I would have to shift my weight forward and get over the bars more to engage the front tire properly. Definitely felt the benefit of the update geo. No doubt I will be faster and safer at the same time on this bike. Thought I would miss the plus tires a little but with the super plush suspension the regular wheels/tires felt great. Overall the bike is even better than I thought. Thanks Specialized, you guys knocked it out of the park!
Four Flusher
Active member
I didn't get that extra piece and it's not installed on the battery. Also, I must of taken a hit the charging port door so the hinge is toast.
WatermanJim
New Member
The workbook has a whole section on it.
maybe order this.
• S214200032 (SUB MY22 LEVO BATTERY EXPANDER KIT)
Four Flusher
Active member
Thanks, is that from a dealer workbook, I couldn't find anything in the owner manual.
WatermanJim
New Member
I'm pretty sure Rob posted this a while back. nice to have. Thanks again Rob!
LosiSA
Member
I have the same constant rattle, i bought the Sworks and the dealer couldn't sort it out so swapped for a Pro, same issue, I have taken the battery out same, checked pivots same, rear brake hose adjustment same, so no idea where the rattle comes from. as said, only rattles when going through trail chatter.. i give up, dont know how to resolve this. Sworks went back to Spec HQ, they rebuilt it and rattle gone, so they dont know the fix either
WatermanJim
New Member
What a pain. It's got to be the battery. This a known problem, that is why they mention it in the workbook and sell the kit to fix it.
Four Flusher
Active member
I'm pretty sure that Gorilla tape is stronger than the factory charging door hinge, not funny on a $11K bike.
WatermanJim
New Member
Yes i got that too. disregard, its got to be up to date if you just had the bike updated with turbo studio at you LBS.
Specialized has work to do on the app.
WatermanJim
New Member
Gorilla tape will melt in the heat and leave a sticky mess. Use 3M duct tape, much better.
roccobarocco
Active member
Anyhow, why is this even necessary on such an expensive Bike? This is sad!
I'm disappointed with my Turbo Levo Pro. I've paid 14k for it (taxes included) and it's already being serviced. Talked to my store yesterday and it's probably a cassette problem (SRAM). Gears are not working properly (11th gear doesn't work). The bike was delivered with that problem (so it was a manufacturing problem). Paid a premium so I could use it now... but I can't 
beutelfuchs
Active member
I should not have read this thread! Today I suddenly had a rattle as well. Checked whattever I could check on the trail, I even put a peace of bark under the battery sleve to make it thicker, but no way....
Maybe its the cables?
Four Flusher
Active member
About that battery rattle, I went to my dealer today and they said that the little plastic piece that's required on S4 and up was taped to the inside of the shipping box and probably it got tossed so they are ordering another.
As far as the shit hinge on the charging door, Specialized is aware and working on a solution, remember the early '19 Levo and the pivot protector or lack there of, seems like another rush to market thing. That said I love the bike.
As far as the shit hinge on the charging door, Specialized is aware and working on a solution, remember the early '19 Levo and the pivot protector or lack there of, seems like another rush to market thing. That said I love the bike.
What model do you have?
Four Flusher
Active member
Expert S5
Four Flusher
Active member
I'm off to home depot, thanks
gling
New Member
Just picked up my S3 S-Works Turbo Levo yesterday. Nice bike all around and a thrill to be on an eBike for the first time.
Haven’t put it through it’s paces but I noticed that upshifting is rough most of the time. I assume it’s a programmed momentum feature (acceleration setting?) that continues to provide power when I stop peddling.
I normally stop peddling for a brief moment on regular bikes when I up- or down-shift to negate such issues but wonder if it is expected for eBikes. I’m going to try messing with the software settings the next time I am able to ride the bike but I wanted to get input in the meantime.
P/s: Apparently Specialized forgot to include the battery charging port cap/flap with my build so I am running around without a charging port cover. Not sure what to make of it but let it be an FYI to future buyers.
Best regards,
Gerald
Haven’t put it through it’s paces but I noticed that upshifting is rough most of the time. I assume it’s a programmed momentum feature (acceleration setting?) that continues to provide power when I stop peddling.
I normally stop peddling for a brief moment on regular bikes when I up- or down-shift to negate such issues but wonder if it is expected for eBikes. I’m going to try messing with the software settings the next time I am able to ride the bike but I wanted to get input in the meantime.
P/s: Apparently Specialized forgot to include the battery charging port cap/flap with my build so I am running around without a charging port cover. Not sure what to make of it but let it be an FYI to future buyers.
Best regards,
Gerald
Last edited:
LosiSA
Member
I thought the same, so removed the battery and rode over some roots, same rattle. It’s not the battery, also the dealer put foam spray in the frame to check it was not cable rattle, still rattles. Only when riding and going over roots/trail chatter.
So guess our Levo’s now sound like shimano motors are in as they have the same rattle
Ntinos
Member
Anyone who moves from carbon SL to Levo Gen3 please ?
ebikerider
Active member
The dealer put foam spray in the frame?? Like expanding foam? Please clarifyI thought the same, so removed the battery and rode over some roots, same rattle. It’s not the battery, also the dealer put foam spray in the frame to check it was not cable rattle, still rattles. Only when riding and going over roots/trail chatter.
So guess our Levo’s now sound like shimano motors are in as they have the same rattle
LosiSA
Member
yip expanding foam in key areas where they though it could possibly rattle, needless to say I wasn't too pleased and still rattled anyway...The dealer put foam spray in the frame?? Like expanding foam? Please clarify
I have given up looking for it... 1 or 2 pivot bolts where not torqued correctly, did those, still rattles.
Similar threads
EMTB Forums
Latest articles
-
Bosch-powered Merida is here – the eOne-Sixty SL and eOne-Eighty intro and test
Merida has used Bosch-motors for years, but not on the emtbs. The full...- Knut Nes
- 10 min read
- Views: 3K
- Reaction score: 5
- Comments: 9
-
Bosch ABS Pro and Trail Pro - an interview about the new ABS profiles
When testing the new Bosch Performance CX gen5, we were also introduced...- Knut Nes
- 2 min read
- Views: 5K
- Reaction score: 2
- Comments: 5