Not really, when i can have my bike in my hand i can check.
But i'm really confident that 30.9 is reached without any shim.
Levo Gen 3 Specialized Gen 3 2022 Levo Megathread!
- Thread starter Rob Rides EMTB
- Start date
But i'm really confident that 30.9 is reached without any shim.
Something like a levociraptor (electronic) or a planet3 (mechanical).
If you've used Blevo in the past then the levociraptor route at least gives you some functionality back which is lost as the Mastermind is locked out from Blevo.
I’ve never used Blevo and wouldn’t want to. I don’t use stuff l that. I like to keep it as simple as possible. So just looking for plug and play.
minuses Garmin to record my rides and only really need mode and battery % on the bike display.Velociraptor messes with speedand mileage on the TCU I think?
minuses Garmin to record my rides and only really need mode and battery % on the bike display.Velociraptor messes with speedand mileage on the TCU I think?
I'm going to be boring again ... there's a whole forum section on de-restricting .... 
The first sticky post in there clearly states that discussing it elsewhere isn't allowed, I'm sure we're allowed some leeway, but if we start de-railing threads and adding yet more duplicated info into an already large thread, no one ever bothers reading it as it's too long.
The first sticky post in there clearly states that discussing it elsewhere isn't allowed, I'm sure we're allowed some leeway, but if we start de-railing threads and adding yet more duplicated info into an already large thread, no one ever bothers reading it as it's too long.
All the Shim and seat tube information was put in Post no 2 several months ago when the mods did one of the first thread cleans so the thread wouldn't be cluttered up with the same questions over and over and over and over and over and over ..
and over and over ...
This is for the SWorks, not sure about the others but I would presume all the carbon models will be the same.
It is shimmed to 30.9 from 34.9 with a 100mm long shim, although it is not really obvious as the seat post clamp hides some of the top of the shim.
See the photos below.
Kiwi a question, is it 2022 Levo ??
Yes
Jersey Skier
Member
Anyone know what Error Code E144 is? @Specialized Rider Care
Eduardoramundo
Well-known member
Open the app on your phone
Jersey Skier
Member
Nothing there. It happened in the middle of my last ride. Power felt off and it flashed the error code. I shut off the bike and made sure the battery was plugged in all the way. Message was gone when I re-started. I was just curious what E144 meant.
battery cabel not sitting propper
maramouse
Active member
Hello everyone, in the Italian forum a user with turbo levo expert 2022 complains of an annoying rattle in the frame, which is heard when going downhill and on obstacles or steps and cannot understand why, an engine has been replaced because for him, it was from what came the strange noise, but it has not solved, I also have an expert 2022 and I have not found any noise, so I ask in this forum if anyone has complained about the same problem and if he has solved it, as he did. Thanks and good rides to everyone.
There are a few threads on "The Rattle" ..
Levo Gen 3 - Help find the rattle on my '22 Levo Expert?
I've had my '22 Levo Expert for three months and about 700 miles. Unfortunately, it came with a very noticeable rattle, which been mentioned on the gen 3 mega thread by myself and a few others. My dealer who has sold a bunch of '22 Levos has tried everything that has been mentioned in the...
www.emtbforums.com
And earlier on in this thread :
Levo Gen 3 - Specialized Gen 3 2022 Levo Megathread!
I left mine on. I see it as more protection but it’s going to look messy on the rear triangle or anywhere the existing film is. I just use my heat gun to make the Ridewrap pliable around the existing film. Seat tube is easy. I have some air bubbles along the down tube film edges but not too...
www.emtbforums.com
Having read all those posts, it’s not apparent as to what exactly the problem is or if it has even been fixed.
is it just the minority that are getting a rattle and are simply unlucky or is it a common problem for all gen 3 Levo owners?
it also makes me ask the question if the dealers even know there is an extra spacer for the battery plastic thing on S4’s and upwards?
I have deposit on one and will be collecting it either Monday or Tuesday. It seems I will be asking the dealer a lot of questions when I go and see it. If the answers don’t satisfy me, maybe I won’t even buy it.!
what is the length of the warranty on a new gen 3 Levo?
is it just the minority that are getting a rattle and are simply unlucky or is it a common problem for all gen 3 Levo owners?
it also makes me ask the question if the dealers even know there is an extra spacer for the battery plastic thing on S4’s and upwards?
I have deposit on one and will be collecting it either Monday or Tuesday. It seems I will be asking the dealer a lot of questions when I go and see it. If the answers don’t satisfy me, maybe I won’t even buy it.!
what is the length of the warranty on a new gen 3 Levo?
Standard 2 years. Then assisted purchase scheme after that.
And reading back through my posts to you, sorry if they sounded off. I guess when you've been around too long and seen the same things like groundhog day you end up feeling like some cranky curator and feel for the mods who've tidied threads so they're not too long to read (though this one's pretty epic now !
LOL ... you really haven't wasted hours of your life reading the threads have you
The 4 year warranty only applies to 2019/2020 bikes. It was put in place when they discovered there were possible "micro bursts" of power due to a firmware error. There was the possibility that this could be one of the reasons for premature motor wear/failure, so those owners were give an extended warranty. Bikes sold after that had the newer firmwares which addressed the issue, so there was no reason to grant the warranty extension. This also only applied to the 2.1 motored bikes, not 1.2 or 1.3 motored bikes which used different firmwares.
So if you want a 4 years warranty - or now 3 years, buy a late 2020 second hand bike
Assisted Replacement :
Assisted Replacement
support.specialized.com
I'd really hate to be a moderator right now looking at tidying this thread
Jersey Skier
Member
Install handlebar, remote, grips. Run dropper cable and install dropper. Run rear der cable and adjust. Install front brake and adjust both brakes. Curse about bent rotors. Hopefully no bleed is necessary. Check wheels are true. Install fender and pedals. Torque all bolts. Run firmware update. Test ride.
Velociraptor
Member
I have a question and some observations. What is the part number for the Gen3 700wh battery? I went to my local bike shop to order a 2nd battery and they ordered an M2 700wh battery but I think this one is for the older gens and does not have the little door. I also just sent an email to specialized about this.
I tried to take the rock guard off the gen3 battery and it does not seem to be built for the rock guard to be removed. It looks like the charge indicator lights are part of the rock guard. I was watching a video recently and it was super easy to pull the rock guard off one battery and put it on another with the older bikes. I pulled a couple of small screws off the rock guard and there is a plastic part that fits in a hole on the battery and still the guard did not want to come off so I stopped and put everything back together.
I took my water bottle cage off because I was using a hydration pack, but decided I wanted to put the cage back on and it turned into a hellish job. The reason is that the metal threads inside the down tube that the cage screws attach to are attached to the wiring that runs from the motor to the controls up top, and at least on my bike is free floating in the down tube. So once the bottle cage is removed then the metal threads inside the down tube are no longer lined up with the holes for the cage. I had to remove the battery and mess around trying to get the holes lined up to get the screws in. Not fun. I am never planning to take that bottle cage off again!
I am loving the bike and have had no issues. I am getting a 2nd battery for those really big days with a lot of climbing. I was hoping to remove the rock guard to better fit the battery in my back pack but looks like that is not happening.
I tried to take the rock guard off the gen3 battery and it does not seem to be built for the rock guard to be removed. It looks like the charge indicator lights are part of the rock guard. I was watching a video recently and it was super easy to pull the rock guard off one battery and put it on another with the older bikes. I pulled a couple of small screws off the rock guard and there is a plastic part that fits in a hole on the battery and still the guard did not want to come off so I stopped and put everything back together.
I took my water bottle cage off because I was using a hydration pack, but decided I wanted to put the cage back on and it turned into a hellish job. The reason is that the metal threads inside the down tube that the cage screws attach to are attached to the wiring that runs from the motor to the controls up top, and at least on my bike is free floating in the down tube. So once the bottle cage is removed then the metal threads inside the down tube are no longer lined up with the holes for the cage. I had to remove the battery and mess around trying to get the holes lined up to get the screws in. Not fun. I am never planning to take that bottle cage off again!
I am loving the bike and have had no issues. I am getting a 2nd battery for those really big days with a lot of climbing. I was hoping to remove the rock guard to better fit the battery in my back pack but looks like that is not happening.
Squamish Sucks
Member
You can swap the guard between the new and old batteries.
You gotta pull out the trap door piece thing, then remove two little screws to get to the big screw. The new one takes a bit more effort to put on and off than the old one, but it does work.
You gotta pull out the trap door piece thing, then remove two little screws to get to the big screw. The new one takes a bit more effort to put on and off than the old one, but it does work.
Velociraptor
Member
Thanks for the info. I will give it another go tomorrow. I am glad to know it's doable.
Similar threads
EMTB Forums
Latest articles
-
The most reliable motor brand (in Norway)
A poll was posted on a big Norwegian emtb facebook group. There are...- Knut Nes
- 3 min read
- Views: 1K
- Reaction score: 5
- Comments: 9
-
2025 Canyon Spectral:ONfly CF Ltd review
We were quite surprised to read about the new lightweight Canyon...- Knut Nes
- 7 min read
- Views: 1K
- Comments: 1