Kenevo SL Official 2022 Kenevo SL (KSL) Megathread!

Porto87133

New Member
Nov 1, 2021
7
0
CH Ticino
Yes, I did. 65mm stroke is fine, the piggyback is shorter on 2021 and newer DHX2s.
Received today 2022 DHX2 and piggy bag is touching frame for 1mm. Now let's see if they can change it for shorter

251529831_400777528417621_3836981182557772354_n.jpg
 

roQer

Member
Jun 29, 2019
83
71
Ludwigshafen am Rhein
That's disappointing. I just ordered a 2022 float X2 in 230x65...wonder if I'll have the same issue on my s4 frame?

Tried to fit my pre 2021 MY X2 factory 230x65 to my S4 frame. The air can is to big and was knocking on the lower linkage. The air can on the new X2 might be smaller in diameter, though.
 

Etacata

Active member
Jan 21, 2019
162
101
Mt. Hood, OR
Tried to fit my pre 2021 MY X2 factory 230x65 to my S4 frame. The air can is to big and was knocking on the lower linkage. The air can on the new X2 might be smaller in diameter, though.
Bummer! Well I'll try the 2022 X3 when it arrives and report back. Worst case I'll send it in to fox to have it reduced to 62.5.
 

KSL

Member
Jul 10, 2021
186
82
SoCal
my bike is s4. Now I am sending back DHX2. Fox guy told me that it's not possible to change the reservoir for a shorter one.

A different reservoir isn't required, but changing the length to 62.5mm is...This is an easy change to do internally. I've been running it for months and works great. The length is your issue.
 

KSL

Member
Jul 10, 2021
186
82
SoCal
Tried to fit my pre 2021 MY X2 factory 230x65 to my S4 frame. The air can is to big and was knocking on the lower linkage. The air can on the new X2 might be smaller in diameter, though.

62.5 rear and 180mm front.

WhatsApp Image 2021-10-13 at 12.19.42 PM.jpeg
 

Porto87133

New Member
Nov 1, 2021
7
0
CH Ticino
maybe you are right but I just don't get how different length will stop hitting the frame. length 230 will be the same so piggyback will be on the same spot as now.
 

Mcharza

E*POWAH BOSS
Aug 10, 2018
2,617
5,393
Helsinki, Finland
Tried to fit my pre 2021 MY X2 factory 230x65 to my S4 frame. The air can is to big and was knocking on the lower linkage. The air can on the new X2 might be smaller in diameter, though.
Did it touch lower linkage when the shock is it's full lenght or when the stroke is it's minimum (when the shock is it's minimum lenght)
 

George_KSL

Active member
Sep 11, 2021
255
292
Slovak Republic
Touched when the shock was fully extended. Reducing stroke to 62.5 could indeed help since the air can will sit bit higher in the frame.

It will sit the same as now, reducing the stroke to 62.5 doesn't change physically anything outwardly. It changes a sag behavior at same percentage, but won't help you.

2022 is same diameter, but the piggy back is lot shorter.
 

George_KSL

Active member
Sep 11, 2021
255
292
Slovak Republic
Ugly potato photo for now, but very happy with how it's starting to look so wanted to share :- ). I've been sick with bronchial inflammation for 5 weeks though, finally getting better, so zero riding, just staring at it.

KSL Comp. Added 2022 X2 Factory and Zeb Ultimate. Deity T-Mac pedals, and my old Enve DH bar/Renthal Duo cockpit. Tomorrow comes SQ-Lab Infinergy 60X saddle and will add my E13 wheelset, just need to decide on winter tyre combo. Probably keeping the T9 Butcher for back with CushCore Pro, and if that ends up being still bit weak, then swapping to dual-ply plus Cush but want to try the weight saving first.

bike2.jpeg
 

Mcharza

E*POWAH BOSS
Aug 10, 2018
2,617
5,393
Helsinki, Finland
Ugly potato photo for now, but very happy with how it's starting to look so wanted to share :- ). I've been sick with bronchial inflammation for 5 weeks though, finally getting better, so zero riding, just staring at it.

KSL Comp. Added 2022 X2 Factory and Zeb Ultimate. Deity T-Mac pedals, and my old Enve DH bar/Renthal Duo cockpit. Tomorrow comes SQ-Lab Infinergy 60X saddle and will add my E13 wheelset, just need to decide on winter tyre combo. Probably keeping the T9 Butcher for back with CushCore Pro, and if that ends up being still bit weak, then swapping to dual-ply plus Cush but want to try the weight saving first.

View attachment 75184
Nice bike. My advice is to keep the front tyre Butcher T9. It's really good and well dampened.
T9 at the rear is too draggy.
 

George_KSL

Active member
Sep 11, 2021
255
292
Slovak Republic
Nice bike. My advice is to keep the front tyre Butcher T9. It's really good and well dampened.
T9 at the rear is too draggy.

I have few scenarios, it's all mainly for Winter which is very slippery and leafy (and the snowy) here, and I also bring my kid on or have my Siberian Husky leashed in front, so maximum traction is ok with me, it's e-bike :- ). For Spring I would get rid of soft rear tyre if it ends up feeling too much.

1) Butcher T9 front & Back, Trail Casing. CushCore Pro in back, CushCore XC in front.
2) My usual Dual-Ply E13 TRS LG, Soft in back, and SuperSoft in front. That + CushCore gets bit heavy... but once I tried CushCore recently, I can't live without. I just can't decide if I still need dual-ply which I really like alone.
3) T9 or E13 in back, but actual mid Spike in front like Hillbilly. I never tried that type of tyre, which seems one notch above Magic Mary so I don't know what those drawbacks look like in reality when the tire squirms..

If I had lighter carbon wheelset, number 2 would be great, but I gave it away to my wife for her LevoSL, to bring that one down to super-light territory :- ).
 

LtotheC

Member
Dec 1, 2020
15
8
Pau / France
Ugly potato photo for now, but very happy with how it's starting to look so wanted to share :- ). I've been sick with bronchial inflammation for 5 weeks though, finally getting better, so zero riding, just staring at it.

KSL Comp. Added 2022 X2 Factory and Zeb Ultimate. Deity T-Mac pedals, and my old Enve DH bar/Renthal Duo cockpit. Tomorrow comes SQ-Lab Infinergy 60X saddle and will add my E13 wheelset, just need to decide on winter tyre combo. Probably keeping the T9 Butcher for back with CushCore Pro, and if that ends up being still bit weak, then swapping to dual-ply plus Cush but want to try the weight saving first.

View attachment 75184
Nice bike. I rode 3 times with the stock tyres and did not enjoyed a lot. Ordered my favorite combo, Magic Mary and Hans Dampf, cant wait to ride again tomorrow
 

Etacata

Active member
Jan 21, 2019
162
101
Mt. Hood, OR
Here's the size difference between the he 2022 X2 vs older. Reservoir is certainly smaller on the 22 model. I'm gonna try fitting the 230x65 X2 to see if it fits with the smaller reservoir. If not I'll get the stroke shimmed to 62.5

PXL_20211105_210413963.jpg
 
Last edited:

North Shore Taxi

New Member
Nov 3, 2021
25
18
Austria
Sounds crazy to put a 241 shock in this high engineered bike......or other words, it simply makes absolut no sense, even when if really fits into. The result would be horrific and your hope that 6 possible Geosettings will fix it will not work.
And the shock on top of your Pic is not MJ 2023, it's 2021 or max 2022.
And the bottom shock is 2020 or older.

Cheers:cool:
 

Etacata

Active member
Jan 21, 2019
162
101
Mt. Hood, OR
Sounds crazy to put a 241 shock in this high engineered bike......or other words, it simply makes absolut no sense, even when if really fits into. The result would be horrific and your hope that 6 possible Geosettings will fix it will not work.
And the shock on top of your Pic is not MJ 2023, it's 2021 or max 2022.
And the bottom shock is 2020 or older.

Cheers:cool:
Had a few typos in my original post. It's a 230mm x 65 2022 X2.
 

Doomanic

🛠️Wrecker🛠️
Patreon
Founding Member
Jan 21, 2018
8,730
10,395
UK
Anyone fitted a DVO Jade X to a KenSL?

Just so we're clear, the correct answer is not "just fit a 150 OneUp post"... :ROFLMAO:
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

555K
Messages
28,054
Members
Join Our Community

Latest articles


Top