militantmandy
Well-known member
2x223mm Hope Rotors for the Decoy to try and make the Code Rs actually slow the bike down.
What did you buy your ebike this week?
- Thread starter Simoto123
- Start date
I’m about to install one of these. The other position didn’t make sense anymore.
Top tube Kiox mount and a slight modification to the knock-block insert. It should clear-up the cockpit for other things.
…like this.
HEY…I’ve been told there is a moratorium on any upgrades for awhile since three of the kids are getting married this year.
. Gotta start saving.
Top tube Kiox mount and a slight modification to the knock-block insert. It should clear-up the cockpit for other things.
…like this.
HEY…I’ve been told there is a moratorium on any upgrades for awhile since three of the kids are getting married this year.
. Gotta start saving.
Nostalgia right there.
User name checks out.
Haha, when I was using this manual I had a Raleigh Apex like this;
Even then about seven eighths of that manual was too old!
Major Stare
Active member
Interested to see how you get on with that.
I want to try some routes I don't know from Strava and just about to pull the plug on a Wahoo Bolt V2 and have been putting off using my mobile.
Major Stare
Active member
Got this for £60 on eBay. Removed both mounts, drilled new holes and refitted one mount in the middle.
Absolutely rock solid.
Last edited:
Pivot
E*POWAH Master
Very cool! Who makes this device?
Major Stare
Active member
Its Rockbros. Designed for two bikes so more than capable of carrying an eMTB as the single bike version wont take a single eMTB.
Dale_Calgary
New Member
You are very brave
Pivot
E*POWAH Master
@Zimmerframe , I recall you posted that you bought slick bar-ends that protect your outer fingers. I can’t find your post… it looked like turned-in short horns.
How are the bar-ends working for you?
I have longer horns but when I hit branches I have to muscle my handlebars straight. Admittedly not the best solution for my riding style. So, looking for alternatives.
How are the bar-ends working for you?
I have longer horns but when I hit branches I have to muscle my handlebars straight. Admittedly not the best solution for my riding style. So, looking for alternatives.
They seem to work well so far. Can't find the original threads, but there's this one :
Loamlab Counterpunch Grips with Granite Stash Tools ?
With the Counterpunch grips I thought I wouldn't be able to use the Granite Stash tools anymore. The Counterpunch grips clamp to the inside of the bar ends to stay solidly in place and the Granite Stash do the same, with an expanding rubber collar. On mine, I had the Race face closed end...
www.emtbforums.com
I had planned to make some video's of riding into tree without them and with them, but injuries at the time meant none of that was possible and I've not been inclined since
RustyMojo
Well-known member
£7.50, that’s just a flat of rubber no and two cable ties? Or am I missing something?
Just ordered a Kios kit for my Trek rail 7, how hard was it to install?
Do you know that you need a government approval?? and that something happens while you are driving or parking there is no assurance that can cover your audacity?
Doesn't that rub paint off under the rubber? Swingarm moves...
RustyMojo
Well-known member
The fitting of the actual is really simple. The routing of the cabling to plug it into the motor is an atrocious job! Set some time aside and work through it methodically taking note of factory routing. Oh and while your there, unless you are running the blendr wired in lighting, purchase a Bosch blanking grommet and remove the wiring for the lights….it causes more trouble than it’s worth!! As I’ve found, to my cost!
300 miles covered with it on and no paint has rubbed off or any signs of hot spots. The is a weald spot in the middle that is raised slightly so the contact of the flap is limited to this area.
I've taken a side on shot so hopefully you see what I mean
Major Stare
Active member
Government approval ??!!??
homologation? How do you call in your country that series of tests that allow a company to sell something in a safe way for all.
Last edited:
Semmelrocc
E*POWAH Master
Government approval in the UK? Shouldn't be a big thing...
View attachment 80472
I’m impressed you can manage to lift your ride on to the car roof…..respect
View attachment 80473
Got this for £60 on eBay. Removed both mounts, drilled new holes and refitted one mount in the middle.
Absolutely rock solid.
I used a SeaSucker on my BMW 6 Series when lugging my Santa Cruz Bronson around the country with no problems at all and believe me them suction cups get a mighty hold…..
Mind you the the Bronson was half the weight of my Whyte E-150 RS..
Elsketcho
Active member
Just waiting for the front wheel to arrive. This is a fat wheel.
thats a good looking wheel, liking the new design.
Similar threads
EMTB Forums
Latest articles
-
The most reliable motor brand (in Norway)
A poll was posted on a big Norwegian emtb facebook group. There are...- Knut Nes
- 3 min read
- Views: 1K
- Reaction score: 5
- Comments: 5
-
2025 Canyon Spectral:ONfly CF Ltd review
We were quite surprised to read about the new lightweight Canyon...- Knut Nes
- 7 min read
- Views: 942
- Comments: 1