I let u know tmr as i have a spare wheel around.. Just need to pump it up.
SZZS specific CEF50-main thread (initial builds and troubleshooting related only)
- Thread starter TCFlowClyde
- Start date
150 mm Fork ?
Axle to Crown Lengths?
If you look at the specifications page the a2c is 572 on the CEF50. So 150-160 fork design. Although many buyer use more and some less.
www.emtbforums.com
Shenzhen Zhaosheng Carbon CEF50 lightweight using Bafang M820 motor (Specifications Thread)
sub-threads Main conversation - https://www.emtbforums.com/threads/m820-bafang-cef50-frame-lightweight.32042/ External Batteries Range extenders -...
www.emtbforums.com
TCFlowClyde
Active member
- Thread starter
- #3,335
Technically, SZZS specs it for 170 mm as per their geo chart. So, peeps could be comfy with a 170/155 mixed wheel 29/27.5 if more travel is desired.If you look at the specifications page the a2c is 572 on the CEF50. So 150-160 fork design. Although many buyer use more and some less.
Shenzhen Zhaosheng Carbon CEF50 lightweight using Bafang M820 motor (Specifications Thread)
sub-threads Main conversation - https://www.emtbforums.com/threads/m820-bafang-cef50-frame-lightweight.32042/ External Batteries Range extenders -...
As most know, I run the 180 fork with 27.5x3.0 front/27.5x2.8 rear (the 3.0 is taller), so I'm have no steering/handling issues and the BB height seems good for the 55 mm stroke. I reckoned AC for the 27.5+ 180 Zeb 44OS was close enough to the 29er 170 Zeb, so I gambled and won. IMHO.
I'm enduro-trail or "trail duro" doing smaller, baby, sidetrail jumps/drops when I can find them but corners in and out berms to my inclinations nicely. I'm not a bike park guy or high flyer...a few local rogue trails have jump lines with berms purposely built in.
I'm happy that my initial risk/reward assessment is paying off!
thank you!! what a great fourm!!
My thoughts would be, I want mullet, but think it mabe too SLACK< the bike is made for 29er front and rear, I am thinking this would be the sweet spot in the HA geo of 64.5, I don't want it too FLOPPY as I turn the bars into the bend...
92se-r
New Member
This wait is killing me. How long did you US guys take to get your frame after paying? I am just staring at a pile of parts.
TCFlowClyde
Active member
- Thread starter
- #3,341
6 months
But I was one of first to pay last January. I think 3-6 weeks if in stock to US (AZ) for me for the warranty frame, so comes in to West Coast (Long Beach, CA).92se-r
New Member
Damn after a month or two, i wouldve thought they ran off with my money. You are a very patient man.6 months
Patience grasshopper.
It takes a week to get on the ship once given to the freight forwarder.
Takes 15 to 25 days to make it across the pond, if you are in the US anyway.
Takes a week to get through customs.
Takes xx to get to you via Fedex or UPS.
But nobody has lost theirs in transit that I know of....
TCFlowClyde
Active member
- Thread starter
- #3,344
The first batch peeps were all in the same....they projected by early March...first framesets went out in early May. 3-month delay was daunting, and I considered asking for a refund, especially on the question of wider airshock fitment like my MegNeG ultimate.
Fortunately, turns out to be the best E-mtb I own out of 3. Was worth it, but not without lots of anxiety, frustration, inquiry, and frankly arguing with SZZS and other forum members.
voigtkampff
Member
I entertain during my wait watching the ship carrying container with my kit as it travels on www.marinetraffic.com
SZZS dispatched my order 1 month after the payment, they had some delays due to new year and other holidays, now it's like 3 weeks for the delivery. My pile of parts is complete for some time now...
The dreaded Spring Lunar holiday!
I waited 3 months because of V2 mod and it took me 5 days to ship it to my hand. I self collect from the flight forwarder. Cant wait for them to send it next days. I am from Malaysia
Like voigtkampff watch the boat it passes the time
I must say Linda is very good and will try to ship before LUNA new year, lets hope!! lucky I have a few other ebikes to ride till then....Like voigtkampff watch the boat it passes the time
Yes linda its very good especially after sale.... I can see she is putting alot of effort to satisfy me.I must say Linda is very good and will try to ship before LUNA new year, lets hope!! lucky I have a few other ebikes to ride till then....
Same here! My frame was at the paint yesterdayI must say Linda is very good and will try to ship before LUNA new year, lets hope!! lucky I have a few other ebikes to ride till then....
Paint?? I went NUDE!! ahaha
It was quite cheap compared to what LightCarbon propose, and it will be for my wife! I wanted to choose a nice flashy pink but she went for a dark green
She has no idea her wheels will be purple
92se-r
New Member
When did you order?
I validated the payment on the 7th of Jan
TCFlowClyde
Active member
- Thread starter
- #3,358
44OS for me. 51 was a little steep for a few reportedly.
I am very comfortable with my current 44mm setup so i think i better not take the risk to 51mm...
My V2 motor cover survive impact as some are asking for it quality. I am not sure how i got it.
Myalteregohamish
Active member
Similar threads
EMTB Forums
Latest articles
-
Santa Cruz Vala X0 review - a new approach to perfection?
The new Vala is Santa Cruz’ first attempt on a Bosch-powered emtb. Like...- Knut Nes
- 6 min read
- Views: 4K
- Reaction score: 5
- Comments: 9
-
A new standard for charging ebikes is coming? A quick interview with Bosch - charge2bike
I had a quick chat with dr Vikram Godbole about "charge2bike", a new...- Knut Nes
- 2 min read
- Views: 2K
- Reaction score: 8
- Comments: 5