spicker
Active member
Anyone else seeing this in the MC app? Wondering if it’s related to my Magicshine install?
Levo Gen 3 Specialized Gen 3 2022 Levo Megathread!
- Thread starter Rob Rides EMTB
- Start date
ebikerider
Active member
Yeah mine said this for a couple of weeks then oddly disappeared yesterday.
Redders473
Active member
Same nothing to worry about
jjglass535
Member
Had that a few weeks ago and my local shop did an update for me
Eduardoramundo
Well-known member
It should be like this, so you have either done it wrong or bought/been sent the kit for the wrong model.
Redders473
Active member
Does anyone know if i push my gear cable in at the top will it come out the chain stay is it all tubes in tubes or do you have to faff. I've got AXS but it's bent and pissing me off so going back to cable xo1
12 minutes ago
Hello Mike.I came across your posts on headset issues with the Turbo Levo. I'm wondering how exactly you worked around this? I have read something about tape being somewhat succesfull (How did you apply this exactly?) And then I came across this post where you replaced the whole headtube bearing set. Has this removed the play in the headset completely? I'm looking for months now to resolve this, without success so far. Thx in for sharing your experiences.
Eduardoramundo
Well-known member
The carbon frame has tubes
New to the Gen 3 Levo! Super fun.
Does anyone in the United States have knowledge of bikespeed-RS compatibility? In other words, will it work? I think Euro regs limit boost on this bike to 15 mph/25 kph while in the USA the Class 1 limit is 20 mph. Learning. Thanks!
Does anyone in the United States have knowledge of bikespeed-RS compatibility? In other words, will it work? I think Euro regs limit boost on this bike to 15 mph/25 kph while in the USA the Class 1 limit is 20 mph. Learning. Thanks!
Jorva 1983
Member
This seems to be the levo expert for 2023 anyone seen more?
not much has changed, i see an other dropper and GX axs rest seems to be the same.
not much has changed, i see an other dropper and GX axs rest seems to be the same.
bikespeed writes, "we sell our tunings worldwide. We have not had any problems reported by customers coming from another country (e.g. USA) as long as the motor, display and software are listed compatible on our website."
Last edited:
smc_stefan
Active member
Looks like a regular seatpost, not a dropper.
Guess the shop didn't put the dropper in. Spesh uses those regular seatposts for shipping for what ever reason.
You can see it here:
sennenorochi
New Member
Evening everyone, has anyone got an idea of how much the stock wheelset that comes with the base model levos (carbon and alu) weighs?
Thanks a lot!
Thanks a lot!
Jorva 1983
Member
Oh ok, never seen that before
Guys, I rode some rock gardens today and after I came back down the hill the motor started cutting out. I have planet3 installed so initially I thought there was something wrong with the sensor, but then I realized that it feels different than when the motor cuts out due to the limiter - it felt more hesitant and kept going in and out. It didn't cut out at any particular speed, it just jittered on and off, although the bike remained on.
Any ideas why this might be? I haven't got a chance to check the sensor and the planet3 mechanism, plan to do that next, but just wondering if this rings any bells?
(22 Levo Alloy)
Any ideas why this might be? I haven't got a chance to check the sensor and the planet3 mechanism, plan to do that next, but just wondering if this rings any bells?
(22 Levo Alloy)
ebikerider
Active member
magnet too far away from sensor and intermttently being sensed...could have moved after the rock garden
samwilk200
New Member
Its a dropper just fully down. You can see the top collar of the dropper, and the remote on the l/h bar.
could be crap in the planet3, covered the magnet
crazyethnic
Active member
Hey Rob I heard you say once that you leave the high and low-speed compression fully open and go on higher air pressure is that true? when you tested the S works Levo.
sennenorochi
New Member
It’s finally here! Super excited for the maiden ride…Still have to change the rear wheel, upgrade transmission to gx and get bca rotors, but I love how it turned out so far!
I just prefer the coil versions and want to try them.Why do you will change your float X with a Superdeluxe? Why do you think which RS it’s better? I’m thinking about changing mine float x but I’m not sure
So the superdeluxe ultimate with mid tune will be tested soon
smc_stefan
Active member
Sorry to bother you guys, but I'm a very happy man right now. Pulled the trigger on a new Levo Pro yesterday, gonna pick it up on Friday for its maiden ride.
Tested a brand new bike just out of the box, it was smooth, seamless, quiet and overall just great. Was in between full fat Levo or light Trek EXe, but the Levo is more what I wanted.
Tested a brand new bike just out of the box, it was smooth, seamless, quiet and overall just great. Was in between full fat Levo or light Trek EXe, but the Levo is more what I wanted.
So just an upate, my planet3 mechanism actually disassembled itself, so much so that the center portion that sits on the axel separated from the rear portion of the housing and the teeth of the gear and the housing were a little shredded. I cleaned it up and reassembled and it seems okay for now.
etoni
E*POWAH Elite
how long were your cranks 160mm or 165mm? mine 22 levo expert s3 are 165mm. specialized website says 160mm.
Last edited:
Just measured 165mm Size S5
Similar threads
EMTB Forums
Latest articles
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two... -
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s...