What did you buy your ebike this week?

Hattori-Hanzo

Well-known member
Apr 10, 2023
419
555
UK
Half bought half made, I wanted to try some magnetic pedals but didn't want to spend the extortionate price incase I don't get on with them at all, so I made some to test the waters.
Yet to try them but they seem to work off the bike, I just need to remove the pin Infront of the magnet as it can hold the plate off if it's in the wrong position, other than that I'm hopeful they will give a good indication if I'll like magnetic pedals or not.

IMG_20241115_174112~2.jpg
 

VWsurfbum

🤴King of Bling🌠
Jan 11, 2021
1,528
2,248
England
Half bought half made, I wanted to try some magnetic pedals but didn't want to spend the extortionate price incase I don't get on with them at all, so I made some to test the waters.
Yet to try them but they seem to work off the bike, I just need to remove the pin Infront of the magnet as it can hold the plate off if it's in the wrong position, other than that I'm hopeful they will give a good indication if I'll like magnetic pedals or not.

View attachment 150381
What a great idea, i'd also like to try them but not 100% convinced?
I used to love being clipped in for the old XC days but not for what I ride nowadays, I always though this would be a good compromise.
 

steve_sordy

Wedding Crasher
Nov 5, 2018
9,003
9,421
Lincolnshire, UK
New chain time for my Levo, it was original and has stretched quite a bit after 450 miles.
Replaced it with a X01.
That is too long by the diameter of a roller, which is 0.3". That would make the chain have a "stretch" of 0.6%. Not too excessive, considering that 0.75% is worn out. But well over the 0.5% that many consider as a good point to replace a chain before it damages the rest of your transmission.
 

JStrube

Active member
Sep 15, 2022
277
208
Atwater, CA
Wintertime is servicetime…
Today an assortment of parts and tools arrived. My tiny workspace in our basement is quickly filling up.
I will renew the outer bearing seals on my Bosch motor and service fork and shock. As this is the first time I will do an air spring rebuild I also needed some of the special tools that Fox requires. Didn’t buy the originals however, but the ones I got look and feel well made and will do the job.
View attachment 150304

Received a bicycle bit set from Wera a few days ago to go with my torque wrench from them. The extra long 89mm bits are ideal to reach those pesky screws in tight locations.
View attachment 150305

Still waiting for Black Friday to pull the trigger on new tires. I will go with the new Schwalbe radial Magic Mary front and rear plus everything needed to fit them tubeless for my first time.
Those Wera tools look nice!
 

James_C

Well-known member
Nov 25, 2019
536
271
Kent, UK
That is too long by the diameter of a roller, which is 0.3". That would make the chain have a "stretch" of 0.6%. Not too excessive, considering that 0.75% is worn out. But well over the 0.5% that many consider as a good point to replace a chain before it damages the rest of your transmission.
I had a KMC chain that measured 0.5 when new!
 

VWsurfbum

🤴King of Bling🌠
Jan 11, 2021
1,528
2,248
England

Zed.

Active member
Apr 26, 2023
176
231
Deepest Bandit country (Wales)
Sram GX Eagle AXS T-Type Rear Derailleur - 12 Speed for £249 down from £430 from Merlin - unashamedly bought as a 'spare' 🤭

Mrs has one (GX) on her KSL and I have an 'XO' on the Canyon (although it's not being ridden at the moment🤷‍♂️)

Rich.

lEPu2q7.jpeg


delivered :cool:

also had the feline delivery inspector's aproval :ROFLMAO:

next to find for sensible money is chains and casettes:eek:

Rich.
 

2WHLFUN

Active member
Apr 27, 2022
107
274
Trinidad, CO
Just finished installing a set of Maven brakes. The stealth master cylinder doesn’t play nice with dropper remotes or mode selection switches. Spent half the evening grinding the dropper mount to fit in the tight spot there. Had to keep the lever there or the ergonomics would be 💩
IMG_9193.jpeg
 

Astro66

Active member
May 24, 2024
321
572
Sydney Australia
New Linkglide 11-50T 11 speed cassette.

1732247922226.png

Fitted to my new wheel and hub that I built myself.

1732247958118.png


New Di2 XT derailleur. Notice the LG (Linkglide) symbol on the clutch housing. This is really important as this confirms this derailleur will give me Autoshift when connected to my EP600 Shimano motor.

1732247894776.png


I also got the Linkglide chain delivered, so I have everything to do the Linkglide conversion. But as I have quite a bit of riding before Xmas. I might leave it till after Xmas to fit, as things are quite busy at the moment, and I don't want to rush the install, or have EMTB issues.

I will connect the derailleur to the motor and reprogramme the motor, and confirm the shifter shifts, whilst it's laying on the floor. Just so I know I have no other research to do to get the derailleur going.
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

555K
Messages
28,042
Members
Join Our Community

Latest articles


Top