What did you buy your ebike this week?

[Hattori-Hanzo]

Half bought half made, I wanted to try some magnetic pedals but didn't want to spend the extortionate price incase I don't get on with them at all, so I made some to test the waters.
Yet to try them but they seem to work off the bike, I just need to remove the pin Infront of the magnet as it can hold the plate off if it's in the wrong position, other than that I'm hopeful they will give a good indication if I'll like magnetic pedals or not.

 

[Zed.]

Sram GX Eagle AXS T-Type Rear Derailleur - 12 Speed for £249 down from £430 from Merlin - unashamedly bought as a 'spare'

Mrs has one (GX) on her KSL and I have an 'XO' on the Canyon (although it's not being ridden at the moment)

Rich.

 

[Zed.]

New chain time for my Levo, it was original and has stretched quite a bit after 450 miles.
Replaced it with a X01. View attachment 150465 View attachment 150466

Christ

Rich.

 

[VWsurfbum]

Half bought half made, I wanted to try some magnetic pedals but didn't want to spend the extortionate price incase I don't get on with them at all, so I made some to test the waters.
Yet to try them but they seem to work off the bike, I just need to remove the pin Infront of the magnet as it can hold the plate off if it's in the wrong position, other than that I'm hopeful they will give a good indication if I'll like magnetic pedals or not.

View attachment 150381

What a great idea, i'd also like to try them but not 100% convinced?
I used to love being clipped in for the old XC days but not for what I ride nowadays, I always though this would be a good compromise.

 

[irie]

New chain time for my Levo, it was original and has stretched quite a bit after 450 miles.
Replaced it with a X01. View attachment 150465 View attachment 150466

That much stretch?

Surely can't have started with the same number of links?

 

[steve_sordy]

New chain time for my Levo, it was original and has stretched quite a bit after 450 miles.
Replaced it with a X01.

That is too long by the diameter of a roller, which is 0.3". That would make the chain have a "stretch" of 0.6%. Not too excessive, considering that 0.75% is worn out. But well over the 0.5% that many consider as a good point to replace a chain before it damages the rest of your transmission.

 

[irie]

0.6 is well over 0.5? Nah, I'd say that 0.1 is a bit over

It was showing 0.5 on my Pedro's chain measuring tool so I replaced it

0.1 is 20% over 0.5 That's a lot.

hth

 

[JStrube]

Wintertime is servicetime…
Today an assortment of parts and tools arrived. My tiny workspace in our basement is quickly filling up.
I will renew the outer bearing seals on my Bosch motor and service fork and shock. As this is the first time I will do an air spring rebuild I also needed some of the special tools that Fox requires. Didn’t buy the originals however, but the ones I got look and feel well made and will do the job.
View attachment 150304

Received a bicycle bit set from Wera a few days ago to go with my torque wrench from them. The extra long 89mm bits are ideal to reach those pesky screws in tight locations.
View attachment 150305

Still waiting for Black Friday to pull the trigger on new tires. I will go with the new Schwalbe radial Magic Mary front and rear plus everything needed to fit them tubeless for my first time.

Those Wera tools look nice!

 

[James_C]

That is too long by the diameter of a roller, which is 0.3". That would make the chain have a "stretch" of 0.6%. Not too excessive, considering that 0.75% is worn out. But well over the 0.5% that many consider as a good point to replace a chain before it damages the rest of your transmission.

I had a KMC chain that measured 0.5 when new!

 

[steve_sordy]

I had a KMC chain that measured 0.5 when new!

Did you send/take it back to the shop?

 

[irie]

I had a KMC chain that measured 0.5 when new!

I have a chain that's currently measuring 0.25, d'ya want to buy it?

 

[VWsurfbum]

More for me than the bike, luckily it came before this cold snap.

9 Areas Heated Vest Jacket USB Men Winter Electrically Heated Thermal Waistcoat for Hunting Hiking Warm Hunting Jacket - AliExpress 200000343

Smarter Shopping, Better Living! Aliexpress.com

a.aliexpress.com

Apologies for the strange face but that's what I look like and I'm also scared I might burst into flames.

 

[Zed.]

More for me than the bike, luckily it came before this cold snap.

chinwarmer

I'm sporting one of those BUT thats Laziness not fashion

Rich.

 

[Zed.]

Sram GX Eagle AXS T-Type Rear Derailleur - 12 Speed for £249 down from £430 from Merlin - unashamedly bought as a 'spare'

Mrs has one (GX) on her KSL and I have an 'XO' on the Canyon (although it's not being ridden at the moment)

Rich.

delivered

also had the feline delivery inspector's aproval

next to find for sensible money is chains and casettes

Rich.

 

[Mik3F]

Fantik x9 Pro inflator as an xmas present

Needed something portable and quick

 

[kefconstruction]

Hope tech 4 v4 in bronze
And burgtec top cap
Get them fitted tommorrow

 

[2WHLFUN]

Just finished installing a set of Maven brakes. The stealth master cylinder doesn’t play nice with dropper remotes or mode selection switches. Spent half the evening grinding the dropper mount to fit in the tight spot there. Had to keep the lever there or the ergonomics would be

 

[Astro66]

New Linkglide 11-50T 11 speed cassette.

Fitted to my new wheel and hub that I built myself.

New Di2 XT derailleur. Notice the LG (Linkglide) symbol on the clutch housing. This is really important as this confirms this derailleur will give me Autoshift when connected to my EP600 Shimano motor.

I also got the Linkglide chain delivered, so I have everything to do the Linkglide conversion. But as I have quite a bit of riding before Xmas. I might leave it till after Xmas to fit, as things are quite busy at the moment, and I don't want to rush the install, or have EMTB issues.

I will connect the derailleur to the motor and reprogramme the motor, and confirm the shifter shifts, whilst it's laying on the floor. Just so I know I have no other research to do to get the derailleur going.