Cheers
I guess that’s collection only as it’s a battery or will they ship it
I guess that’s collection only as it’s a battery or will they ship it
Orbea Rise , anyone seen one yet ?
- Thread starter Steve G H
- Start date
Got some thread lock today to do the crank arms before the weekend
just a couple is questions does this need to be done on the carbon crank arms or just the models with alloy arms ?
The bolt that need thread locking is this just the centre bolt as you look directly at the arm of the little one that goes through the side of the arm too ?
just a couple is questions does this need to be done on the carbon crank arms or just the models with alloy arms ?
The bolt that need thread locking is this just the centre bolt as you look directly at the arm of the little one that goes through the side of the arm too ?
jka
Active member
The tech update from Ethirteen is only for alloy cranks, but it sure couldn't hurt to check the carbon ones too. I don't know what the torque specs are for the carbon cranks. The locktite should definitely be on the pre-load cap. It's not mentioned if the pinch bolts need locktite, but it sure couldn't hurt.
support.ethirteen.com
TSB #156 - e*spec Shimano™ alloy crank tech update
TECHNICAL SERVICE BULLETIN #156.2 e*spec Shimano™ alloy crank tech update Product(s) included: e*thirteen e*spec Shimano EP8 alloy cranks. Abstract e*spec Shimano EP8/EP800 alloy cranks were dev...
support.ethirteen.com
RickBullotta
E*POWAH Elite World Champion
CARBON TOO!!! My carbon arm fell off on my second ride.
Rick did you just thread lock the cap . Or the pinch bolt too
what torque did you do them up to
bbred
Member
You can order direct off Orbea website. Delivery April
jka
Active member
You have carbon arms?!?! Sweeeeet!! Which orthopedic surgeon attached those? Which model did you get?
Just messing with you. I forgot you had the high end bike with carbon and unobtainium everything.
Do you know if the torque specs are the same as for the alloy cranks?
soundwave
Active member
Rise M10 ordered and delivery in a week. Found one XL in stock from Bikester. Question, are there any ways to get motor data visible into Apple Watch?
jim0905
Active member
I keep getting on at Tredz to make this live on their site so I can order it through them as I have £250 worth of vouchers to use but it's like talking to a brick wall. They said they could do a manual order over the phone but didn't know how to process the vouchers by phone
Orbea Rise RS Range Extender - Out of Stock | Tredz Bikes
Orbea Rise RS Range Extender. Out of Stock. All Batteries are delivered free to the UK mainland*, 365 day returns & Price Match.
www.tredz.co.uk
RickBullotta
E*POWAH Elite World Champion
You have carbon arms?!?! Sweeeeet!! Which orthopedic surgeon attached those? Which model did you get?
View attachment 56734
Just messing with you. I forgot you had the high end bike with carbon and unobtainium everything.
Do you know if the torque specs are the same as for the alloy cranks?
I actually have a prototype carbon exoskeleton of my own design. Still working out the kinks.
I ended up selling the stupidly light saddle that came with the LTD. No way my a$$ would comfortable on it. And after switching to a DPX2 and Fox 36 Factory, along with 4 piston XTR brakes, I basically ended up with a Rise Team. ;-) But the LTD shipped sooner.
Yes, the torque specs are the same (2Nm for preload cap, then 14Nm for the crank arm bolts). And blue/242 threadlocker on the cap and the bolts.
Cheers Rick much appreciated
jka
Active member
When you get all of the kinks worked out of that exoskeleton, let me know. i may want to invest in one.
A few years ago....OK, a lot of years ago, I was a little bit of a weight weenie and I bought one of those fancy super light saddles. Felt like sitting on a brick. It's still sitting in my garage somewhere, but it sure as heck didn't stay on my bike for very long. Glad you;re getting your bike dialed in.
RickBullotta
E*POWAH Elite World Champion
Not to crap on the party, but the Apple Watch doesn’t support ANT+ so some of the data might not be accessible via Bluetooth.
There is a fair few of use with the orbea rise now I wonder if we will get a Pacific orbea section on the forum ?
Ha ha that talk type for you ?
I only really want to see the battery % so was hoping this would be possible, but probably just need to get a Garmin
RickBullotta
E*POWAH Elite World Champion
That should be do-able - the Bluetooth interface supports (AFAIK) speed, range, and battery level. I don't think it shows assist mode or assist percentage.
PhilBaker
Well-known member
Come on Rob, now you've got one, can we have a dedicated Orbea section?
Please Rob ????
Unfortunately the Gen 3 Levo dropped just as Rob got his hands on the Rise so he’s been busy ! Hopefully not too long nowCome on Rob, now you've got one, can we have a dedicated Orbea section?
When you guys do the thread lock to the crank Adam it says one the ethirteen link that the inner seal has to be removed and discarded ??
did you guys leave this out or refit it ?
did you guys leave this out or refit it ?
soundwave
Active member
P.S. Bikester still has all Rise models in stock with different sizes. Seems to be only four M10 and M20 models though.
brendand
New Member
Maybe @Rob Rides EMTB can put in a good word for me at Orbea so they can ship one out earlier
. Still July for my blue M10 XL.Also anything that can be displayed in the iOS app can be displayed on the Apple Watch. The iPhone would be used as a gateway between the bike and the watch. That's the way my own app works. The watch makes a request to the iOS app and the iOS app returns the results to display on the watch. I keep my iPhone in my pocket when I'm riding.
RickBullotta
E*POWAH Elite World Champion
Remove the inner seal and discard it. This allows the crank arm to fully seat on the splines.
I went to do this last night no seal present and they already had thread lock on them
Looks like my lbs either did this , or if the cranks come on fitted to the bike from orbea they must do this now
Looks like my lbs either did this , or if the cranks come on fitted to the bike from orbea they must do this now
Similar threads
EMTB Forums
Latest articles
-
Bosch-powered Merida is here – the eOne-Sixty SL and eOne-Eighty intro and test
Merida has used Bosch-motors for years, but not on the emtbs. The full...- Knut Nes
- 10 min read
- Views: 3K
- Reaction score: 5
- Comments: 7
-
Bosch ABS Pro and Trail Pro - an interview about the new ABS profiles
When testing the new Bosch Performance CX gen5, we were also introduced...- Knut Nes
- 2 min read
- Views: 5K
- Reaction score: 2
- Comments: 5