Orbea Rise , anyone seen one yet ?

[chrismechmaster]

Cheers

I guess that’s collection only as it’s a battery or will they ship it

 

[Steve G H]

No idea , never asked , I'll fetch it if need be

 

[Steve G H]

Bought my Rise from their Daventry store

 

[chrismechmaster]

Got some thread lock today to do the crank arms before the weekend

just a couple is questions does this need to be done on the carbon crank arms or just the models with alloy arms ?
The bolt that need thread locking is this just the centre bolt as you look directly at the arm of the little one that goes through the side of the arm too ?

 

[jka]

The tech update from Ethirteen is only for alloy cranks, but it sure couldn't hurt to check the carbon ones too. I don't know what the torque specs are for the carbon cranks. The locktite should definitely be on the pre-load cap. It's not mentioned if the pinch bolts need locktite, but it sure couldn't hurt.

TSB #156 - e*spec Shimano™ alloy crank tech update

TECHNICAL SERVICE BULLETIN #156.2 e*spec Shimano™ alloy crank tech update Product(s) included: e*thirteen e*spec Shimano EP8 alloy cranks. Abstract e*spec Shimano EP8/EP800 alloy cranks were dev...

support.ethirteen.com

 

[RickBullotta]

Got some thread lock today to do the crank arms before the weekend

just a couple is questions does this need to be done on the carbon crank arms or just the models with alloy arms ?
The bolt that need thread locking is this just the centre bolt as you look directly at the arm of the little one that goes through the side of the arm too ?

CARBON TOO!!! My carbon arm fell off on my second ride.

 

[chrismechmaster]

CARBON TOO!!! My carbon arm fell off on my second ride.

Rick did you just thread lock the cap . Or the pinch bolt too

what torque did you do them up to

 

[bbred]

I looked on leisure lakes couldn’t even find them on there website ?

You can order direct off Orbea website. Delivery April

 

[jka]

CARBON TOO!!! My carbon arm fell off on my second ride.

You have carbon arms?!?! Sweeeeet!! Which orthopedic surgeon attached those? Which model did you get?

Just messing with you. I forgot you had the high end bike with carbon and unobtainium everything.
Do you know if the torque specs are the same as for the alloy cranks?

 

[soundwave]

Rise M10 ordered and delivery in a week. Found one XL in stock from Bikester. Question, are there any ways to get motor data visible into Apple Watch?

 

[jim0905]

Anyone order a range extender yet or found anyone that’s selling them

Ebike shop in Farnham will ONLY sell you one if you have brought your bike from them

Can’t find anyone else ?

I keep getting on at Tredz to make this live on their site so I can order it through them as I have £250 worth of vouchers to use but it's like talking to a brick wall. They said they could do a manual order over the phone but didn't know how to process the vouchers by phone

Orbea Rise RS Range Extender - Out of Stock | Tredz Bikes

Orbea Rise RS Range Extender. Out of Stock. All Batteries are delivered free to the UK mainland*, 365 day returns & Price Match.

www.tredz.co.uk

 

[RickBullotta]

You have carbon arms?!?! Sweeeeet!! Which orthopedic surgeon attached those? Which model did you get?
View attachment 56734

Just messing with you. I forgot you had the high end bike with carbon and unobtainium everything.
Do you know if the torque specs are the same as for the alloy cranks?

I actually have a prototype carbon exoskeleton of my own design. Still working out the kinks.

I ended up selling the stupidly light saddle that came with the LTD. No way my a$$ would comfortable on it. And after switching to a DPX2 and Fox 36 Factory, along with 4 piston XTR brakes, I basically ended up with a Rise Team. ;-) But the LTD shipped sooner.

Yes, the torque specs are the same (2Nm for preload cap, then 14Nm for the crank arm bolts). And blue/242 threadlocker on the cap and the bolts.

 

[chrismechmaster]

Cheers Rick much appreciated

 

[jka]

I actually have a prototype carbon exoskeleton of my own design. Still working out the kinks.

I ended up selling the stupidly light saddle that came with the LTD. No way my a$$ would comfortable on it. And after switching to a DPX2 and Fox 36 Factory, along with 4 piston XTR brakes, I basically ended up with a Rise Team. ;-) But the LTD shipped sooner.

Yes, the torque specs are the same (2Nm for preload cap, then 14Nm for the crank arm bolts). And blue/242 threadlocker on the cap and the bolts.

When you get all of the kinks worked out of that exoskeleton, let me know. i may want to invest in one.
A few years ago....OK, a lot of years ago, I was a little bit of a weight weenie and I bought one of those fancy super light saddles. Felt like sitting on a brick. It's still sitting in my garage somewhere, but it sure as heck didn't stay on my bike for very long. Glad you;re getting your bike dialed in.

 

[Bike&Beer]

Rise M10 ordered and delivery in a week. Found one XL in stock from Bikester. Question, are there any ways to get motor data visible into Apple Watch?

Well done finding stock, you’re going to love it!

I haven’t found a way to connect to Apple Watch. I’m banking on @brendand building an app once his Rise arrives!

 

[chrismechmaster]

We all need @brendand to get his bike soon then what a legend if he manages to build a app for the watch I certainly would use it / subscribe to it

 

[RickBullotta]

Not to crap on the party, but the Apple Watch doesn’t support ANT+ so some of the data might not be accessible via Bluetooth.

 

[chrismechmaster]

There is a fair few of use with the orbea rise now I wonder if we will get a Pacific orbea section on the forum ?

 

[DanMcDan]

Is that the one with the snorkel?

 

[chrismechmaster]

Ha ha that talk type for you ?

 

[Bike&Beer]

Not to crap on the party, but the Apple Watch doesn’t support ANT+ so some of the data might not be accessible via Bluetooth.

I only really want to see the battery % so was hoping this would be possible, but probably just need to get a Garmin

 

[RickBullotta]

I only really want to see the battery % so was hoping this would be possible, but probably just need to get a Garmin

That should be do-able - the Bluetooth interface supports (AFAIK) speed, range, and battery level. I don't think it shows assist mode or assist percentage.

 

[PhilBaker]

There is a fair few of use with the orbea rise now I wonder if we will get a Pacific orbea section on the forum ?

Come on Rob, now you've got one, can we have a dedicated Orbea section?

 

[chrismechmaster]

Please Rob ????

 

[ReVolt]

Come on Rob, now you've got one, can we have a dedicated Orbea section?

Unfortunately the Gen 3 Levo dropped just as Rob got his hands on the Rise so he’s been busy ! Hopefully not too long now

 

[chrismechmaster]

When you guys do the thread lock to the crank Adam it says one the ethirteen link that the inner seal has to be removed and discarded ??
did you guys leave this out or refit it ?

 

[soundwave]

P.S. Bikester still has all Rise models in stock with different sizes. Seems to be only four M10 and M20 models though.

 

[brendand]

We all need @brendand to get his bike soon then what a legend if he manages to build a app for the watch I certainly would use it / subscribe to it

Maybe @Rob Rides EMTB can put in a good word for me at Orbea so they can ship one out earlier . Still July for my blue M10 XL.

Also anything that can be displayed in the iOS app can be displayed on the Apple Watch. The iPhone would be used as a gateway between the bike and the watch. That's the way my own app works. The watch makes a request to the iOS app and the iOS app returns the results to display on the watch. I keep my iPhone in my pocket when I'm riding.

 

[RickBullotta]

When you guys do the thread lock to the crank Adam it says one the ethirteen link that the inner seal has to be removed and discarded ??
did you guys leave this out or refit it ? View attachment 56851

Remove the inner seal and discard it. This allows the crank arm to fully seat on the splines.

 

[chrismechmaster]

I went to do this last night no seal present and they already had thread lock on them

Looks like my lbs either did this , or if the cranks come on fitted to the bike from orbea they must do this now