JimLee-Lightcarbon
Lightcarbon
Bafang no supply extended battery,they only request the battery with sam voltage as the motor,Bafang agree this solution ?
Bafang no supply extended battery,they only request the battery with sam voltage as the motor,Bafang agree this solution ?
Tu veux dire que la batterie d'extension est en parallèle avec la batterie principale ? Une prise supplémentaire est nécessaire pour se connecter au moteur, quelque chose que nous ne pouvons pas réparer pour le moment car nous ne pouvons pas trouver de prise appropriée.l idéal et mettre un séparateur de batteriel ideal and put a battery separator
That's going to be difficult to answer since everyone has their own preferred setup with stems and spacers.also, I see the head tube is 120mm in size L.
According to your experience, what could be the minimum size for the fork tube length? There is a nice revelation at a good price near me which is cut at 185mm, I think that’s ok but I prefer to double check…
Yeah sure, you’re right, I’m not a big fan of huge spacers and very high stem! So I think it should be right…That's going to be difficult to answer since everyone has their own preferred setup with stems and spacers.
You can figure about 50mm for the stem and 10-15mm for headset cap. So 120+15+50=185 so it would be pretty close.Yeah sure, you’re right, I’m not a big fan of huge spacers and very high stem! So I think it should be right…
I have a E10 with 120 mm steering tube and need 210 mm of fork steering tube length. 50 mm stem, 20 mm headset cup, 20 mm spacers. Be careful…also, I see the head tube is 120mm in size L.
According to your experience, what could be the minimum size for the fork tube length? There is a nice revelation at a good price near me which is cut at 185mm, I think that’s ok but I prefer to double check…
Hey Jim, can we have an update on the retro planning for the frame production ? Do you already have frames ready in Medium ? If yes, can we see the pictures ?
Thanks!
Looks great! Very proportional with clean lines.Carol from Light-Carbon sent me this photo
View attachment 108690
seems it use old magnet sensor like m510 on dengfu e10Carol from Light-Carbon sent me this photo
View attachment 108690
Hi KaroKoenig,Carol from Light-Carbon sent me this photo
I‘am waiting for my L-Frame,Hi KaroKoenig,
any planst to test the motor soon with your older frame?Or you are waiting for the new one?
You’re probably right, we need to see what would be the biggest size we can fit hereIt's an attractive frame, but that kinked seat tube so high is going to limit dropper post insertion considerably.
Height 182cm, fit for frame size L, the Max droopper post insert length is 200mm, not 180mm,brbr
The longest dropper post is oneup 180mm. Fully slammed down should be OK for about 182cm tall, mad mountain biker.
That’s nice!Height 182cm, fit for frame size L, the Max droopper post insert length is 200mm, not 180mm,
View attachment 109189
Yes, the mostest attractive of this frame is the diversity of gameplay; the performance of purely riding on downhill conditions is not as good as that of conventional heavy-duty EMTBThat’s nice!
I’m 184, but I prefer bikes not too huge and more playful!
when will size S?size M now have about 50 sets can be booked, loading time is about in 15th, April, send mail to [email protected],
Yes, the mostest attractive of this frame is the diversity of gameplay; the performance of purely riding on downhill conditions is not as good as that of conventional heavy-duty EMTB
Order before the end of March, delivery time is about mid-May,when will size S?
That’s a great news for the weight reduction!There is one bolt that needs to be improved, Bafang has settled on using our frame as an exhibit, maybe the American Sea Otter show? I'm not sure.
There is a latest news about the frame. We have upgraded the weight again. Under the premise of ensuring the quality, the weight of the M size is now 2750g instead of the previous 2950g.
Hi JimHeight 182cm, fit for frame size L, the Max droopper post insert length is 200mm, not 180mm,
View attachment 109189
size M now have about 50 sets can be booked, loading time is about in 15th, April, send mail to [email protected],
Hi Jim
Yes insertion length is 200mm but the longest dropper post to fit the frame is 180mm (stroke). The shortest insertion length droppers are made by OneUp. If 240mm (stroke) dropper post is fitted in LCE930 frame than 184cm tall person will have too short legs to reach the pedals.
Are there any news if the frame can be supplied with the motor+battery kit ? Or the motor+battery kit have to be bought somewhere else?
Thanks
View attachment 109200
The World's largest electric mountain bike community.