for me (france) the battery was inside the motor (M500) parcel
Dengfu E10 - The CHEEB V1.0 - Discussion
- Thread starter Rob Rides EMTB
- Start date
Sunburntwily
Member
That's a worry. I must admit I thought it would come together. The charger came in the box with the motor. Anyway wait and see I guess.
Puschtrale
Active member
Hi guys, does anyone have information regarding weight of the battery with 800wh? Just received mne and seems like a ton ??. Did not have the time yet to weight it. Maybe someone else did?
I think rob weighed the 840 and that was 4000g
Puschtrale
Active member
Really? Only? So the 625 wh bosch battery is almost the same as the weight 3500 gr. Calculating it would be 5.6gr / wh with boech and 4,76 gr/ wh for the bafang battery.
I believe so. There was quite a lot of surprise at the time !
Curiousman
New Member
with a custom color frame ?I got information regarding my order - motor will be here this week, frame shod be finished in 2 weeks (ordered end of January) and for the battery they don't know exactly when will be on stockbut frame and battery will be shipped together.
RyeNiel
Member
Can we charge the battery every after ride?
I charge mine only the day before, i avoid to keep the battery fully charged several days/week
RyeNiel
Member
Noted
captainhightop
Active member
Charging only to 80% or even 90% will significantly extend the life of the battery (number of charge/drain cycles etc.). But obviously you won't get the same range as 100% charged. You can either use a "smart" charger or do it on I timer I guess. Not sure if any BMS have the ability to cut the charge at a lower rate too.
That said if you want maximum range, just charge to 100% and save up to replace the battery when you start losing range.
Ebike charging for long Battery life
Ebike charging for long Battery life So, you want your battery to last a long time?…remember that most people will not ride their ebike 500 times in their lifetime. Maybe hard to believe, but…
www.electricbike.com
Complete E-Bike Battery Care Guide
Discover the do's and don'ts of e-bike battery care, ensuring prolonged efficiency, optimal performance, and extended longevity.
electricbikeaction.com
Sunburntwily
Member
Ordered 22 jan. Expected mid April, they still waiting for battery.
thaeber
Well-known member
Fill it with epoxy, paint it, forget it.
OK thx guys for the feedback!About the bike i have received the batch with the old motor, but Tosa informed me about this before the purchase.So it is not that loud.I think the bosch gen4 is louder.So now i need to purchase some parts for upgrades and will test it in the mountains soon.But so far i like the motor although 4kg.
Greets
Sava
Greets
Sava
Waynemarlow
E*POWAH Master
Looks like the Ali inserts haven't been bonded into the carbon correctly or possibly you have over tightened the bolts in the warm of your garage and then gone out into the cold ? Can you take a photo of the area where the inserts sit in the carbon as if its a clean fracture of the bond and the inserts will fully sit back into the recess, you could just super glue them back in or better still use one of the specialist epoxy glues designed for the purpose
High Performance Structural Adhesives - Easy Composites
www.easycomposites.co.uk
High Performance Structural Adhesives - Easy Composites
VM100 Black High Strength Structural Methacrylate (MMA) Adhesive - Easy Composites
5min working time, black, fast-curing high strength structural MMA acrylic adhesive for composites, metals and some plastics. 25ml, 50ml or 400ml cartridges in stock for UK next-day and fast shipping worldwide.
www.easycomposites.co.uk
Hi.
I got M600 motor last week and for comparison there is my motor Nr. MM G521.500.C11 and on controller CRX10N.500.FC 3.2 (Software version CRX 10NC4818il32 046.7) - if someone would compare those numbers with his M600 motor to check what version is it. I don't know if I got the newest with hardened nylon gear (I'm a bit sceptic about nylon - PEEK is there normally much better).
Frame should be finished this week and I got question if I could take 16Ah battery and not 17,5Ah since this can be delivered quicker (no answer until now how much quicker).
BR
Bogdan
I got M600 motor last week and for comparison there is my motor Nr. MM G521.500.C11 and on controller CRX10N.500.FC 3.2 (Software version CRX 10NC4818il32 046.7) - if someone would compare those numbers with his M600 motor to check what version is it. I don't know if I got the newest with hardened nylon gear (I'm a bit sceptic about nylon - PEEK is there normally much better).
Frame should be finished this week and I got question if I could take 16Ah battery and not 17,5Ah since this can be delivered quicker (no answer until now how much quicker).
BR
Bogdan
Last edited:
@Curiousman - my frame is not in custom colour - normal mat black.
Curiousman
New Member
Thanks
Sunburntwily
Member
I got the same question. I said "no" I'd rather the 17.5 ah battery. I think I have waited this long a few more weeks will not matter.
Puschtrale
Active member
So finally my framset is painted and will be shipped within today. Looking forward to assemble my new bike . Does anyone know if a Rock Shox Super Deluxe select + from a Santa Cruz hightower carbon cc with 210 x 55 mm will fit without problems or is it just a model that fits in certain bikes? My ordered shock was a Super Deluxe Ultimat RCT DonAir 210 x 55 mm but they do not know when it will be available. What shock is the better one? Thanks guys
. Does anyone know if a Rock Shox Super Deluxe select + from a Santa Cruz hightower carbon cc with 210 x 55 mm will fit without problems or is it just a model that fits in certain bikes? My ordered shock was a Super Deluxe Ultimat RCT DonAir 210 x 55 mm but they do not know when it will be available. What shock is the better one? Thanks guys
captainhightop
Active member
If it's similar to the one I got on ebay, it's not compatible without changing the damper body for a standard instead of bearing eyelet (this is what I bought wrongly and it's too wide by a long way).
The damper body from the the standard one is swappable, but when it came to replacing it with a standard one, there was a long lead time for the standard damper body, so I bought a deluxe with a standard body as a donor and paid Sprung Suspension in the UK to change it over and service it (same price as standard service).
The damper body from the the standard one is swappable, but when it came to replacing it with a standard one, there was a long lead time for the standard damper body, so I bought a deluxe with a standard body as a donor and paid Sprung Suspension in the UK to change it over and service it (same price as standard service).
RyeNiel
Member
Hi guys. Question from a new owner. How do you wash/clean the bike after a muddy ride? Specially the area where the motor is. Thanks.
Maybe the aluminum nut caps are just protection for shipping? It looks like there are already inserts in the frame?
EMTB Forums
Latest articles
-
A new standard for charging ebikes is coming? A quick interview with Bosch - charge2bike
I had a quick chat with dr Vikram Godbole about "charge2bike", a new... -
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two...