Dengfu E10 - The CHEEB V1.0 - Discussion

[KaroKönig]

By chance someone knows what a standard crankshaft toothing is and whether there are lighter / shorter cranks for sale ? Thank‘s

 

[jtran69]

By chance someone knows what a standard crankshaft toothing is and whether there are lighter / shorter cranks for sale ? Thank‘s

View attachment 52840

I’m also interested.

 

[patdam]

By chance someone knows what a standard crankshaft toothing is and whether there are lighter / shorter cranks for sale ? Thank‘s

(3) Dengfu E10 Suspension/Wheel Options - EMTB Forums

To complete my previous speak on this subject.
It's specific BAFANG ISIS, only original cranks can be used (at this time)
I have asked to MIRANDA and LEKKIE last year , they answered "in study" (i think they still doing study)
After built and test mine E10, shortener cranks not necessary.

But if somebody really wants a set, i can sale or exchange those i have built (154mm)

 

[Hellcat]

Is speed limited 25km/h or not? I am curious.

 

[Niklas Kinn]

I’m also interested.

LUNA X1 Enduro Short Crank Arms

Providers of quality ebikes, electric bike batteries, motors and components at affordable pricing.

lunacycle.com

 

[Niklas Kinn]

Is speed limited 25km/h or not? I am curious.

The M500 is speed limet for 25 km/t
The M600 is has no speed limet

 

[MrSimmo]

Is it legal to build your own eMTB? All the most important information and legislation regarding DIY ebikes

Are you allowed to build your own ebike and just start riding or do the cost savings end up becoming a buzzkill? We've examined the legal requirements and pitfalls for you and identified what you need to be aware of.

ebike-mtb.com

Always some jobsworth coming to spoil the party

 

[Zimmerframe]

Is it legal to build your own eMTB? All the most important information and legislation regarding DIY ebikes

Are you allowed to build your own ebike and just start riding or do the cost savings end up becoming a buzzkill? We've examined the legal requirements and pitfalls for you and identified what you need to be aware of.

ebike-mtb.com

Always some jobsworth coming to spoil the party

Was slipped into a discussion in the "build" thread ..

My Chinese frame and motor build. The CHEEB, V1.0 - Build Thread

bafang installation manual

www.emtbforums.com

 

[MrSimmo]

Was slipped into a discussion in the "build" thread ..

My Chinese frame and motor build. The CHEEB, V1.0 - Build Thread

bafang installation manual

www.emtbforums.com

Ah ?‍♂

 

[Zimmerframe]

Ah ?‍

It's probably more relevant in here for longer term discussion !

 

[MrSimmo]

It's probably more relevant in here for longer term discussion !

Phew, in that case it was deliberate ?

 

[nurv0]

Does any of you guys M500/M600 kits come with a throttle? Is it still an option from Dengfu/Bafang/CNEbikes?

 

[Niklas Kinn]

Does any of you guys M500/M600 kits come with a throttle? Is it still an option from Dengfu/Bafang/CNEbikes?

very good question. I received my M600 last week and can not find any throttle in the box

 

[Curiousman]

very good question. I received my M600 last week and can not find any throttle in the box

There was a throttle included in the delivery of a M500 in Belgium 2 weeks ago...

 

[Niklas Kinn]

There was a throttle included in the delivery of a M500 in Belgium 2 weeks ago...

I have to look again. otherwise I write for melody

 

[patdam]

i found an solution to use the throtlle for walk mode. I fix it so that it comes up against the brake collar when I am at the maximum levels necessary to advance on foot

Note: M500/600 throtlle have the same connector and wiring than BBS

 

[RyeNiel]

very good question. I received my M600 last week and can not find any throttle in the box

I have mine

 

[Niklas Kinn]

I have mine

i find mine to ??

 

[Von Dutch]

Rob what are your exact specs fork? 180mm 44 rake like you show in your order Bike discount?
Want to try 29er front and rear with ZEB Ultimate.
Have you tried a coil shock?

 

[Rob Rides EMTB]

Rob what are your exact specs fork? 180mm 44 rake like you show in your order Bike discount?
Want to try 29er front and rear with ZEB Ultimate.
Have you tried a coil shock?

170mm 44 offset. Not tried a coil, wanted to but zero stock!

 

[Von Dutch]

170mm 44 offset. Not tried a coil, wanted to but zero stock!

OK i will try to get one. Keep you informed. Bike is ordered and will be shipped soon i hope. Nardo grey painted by Dengfu.

 

[thaeber]

OK i will try to get one. Keep you informed. Bike is ordered and will be shipped soon i hope. Nardo grey painted by Dengfu.

Oh, they offer painted frames? What‘s the upcharge for that, and whrere do I find the colours they offer?

 

[JACER]

Just had an email back now about paint options

Painting cost is $85 for a single colour

Usually for stuff like this you provide Manufacturers paintcode or a Pantone value

 

[Puschtrale]

Guys, i just had email contact with meldoy and she told me that bafang are not able to send any motors out to them before end of march ?‍. I wonder where my frame is because they still did not produce it (CNY holidays). Made my order on january 18 ??

 

[Curiousman]

Guys, i just had email.contqct with meldoy and she told me that bafang are not able.to send any motors out to them before end of march ?‍. I wonder where my frame is because they still did not produce it (CNY holidays). Made my order on january 18 ??

Updated version of the motor, for sure...

 

[Puschtrale]

Updated version of the motor, for sure...

Hope that you ae right. If that would be the reason they are delayed, will appreciate ?

 

[Puschtrale]

I am ready, wheels DT swiss h1700, front 29, rear 27,5". Fork and shock not yet delivered. Now I'll have to wait for frameset, motor and battery to arrive ??

 

[Niklas Kinn]

I am ready, wheels DT swiss h1700, front 29, rear 27,5". Fork and shock not yet delivered. Now I'll have to wait for frameset, motor and battery to arrive ?? View attachment 53508

super I have received motor and frame. so I'm just waiting for wheels and suspension

 

[Puschtrale]

super I have received motor and frame. so I'm just waiting for wheels and suspension
View attachment 53530

Cool ?. But where are the inteenal cabling from motor and battery? Are they not yet installed ??

 

[Niklas Kinn]

Cool ?. But where are the inteenal cabling from motor and battery? Are they not yet installed ??

yes they are installed i have just moved them for painters