Front Hope M (+40mm) 220mm Rotor
Rear Hope H (+23mm) 203mm Rotor
2024 Strive:ON
- Thread starter Rob Rides EMTB
- Start date
Rear Hope H (+23mm) 203mm Rotor
Thanks very much again. I really appreciate it!
So it seems that Canyon may have installed the incorrect size spider on my chainring. I can make out a "52mm" printed on the inside of the spider but its hard to see because its printed on the inside facing the motor. Will verify for sure after I get the correct tools to pull the crank and chainring tomorrow. I believe the chainline for this bike is 55mm. Now what... ugh. 
Did you check to see if it's the correct chain line on the spider that's been installed?So it seems that Canyon may have installed the incorrect size spider on my chainring. I can make out a "52mm" printed on the inside of the spider but its hard to see because its printed on the inside facing the motor. Will verify for sure after I get the correct tools to pull the crank and chainring tomorrow. I believe the chainline for this bike is 55mm. Now what... ugh.
I took mine off to have a look, it's definitely a 55mm CL, it's stamped near the centre of the spider.
Thanks. I spoke with them and submitted more pictures of their f-up. Guy on the phone assured me they would take care of me. Will see.That's not good, how have managed to get that wrong
Hopefully Canyon will get that resolved quickly for you.
shakazulu12
New Member
Officially joined the club. Won't be able to build it out until tomorrow at the earliest though. Everything looked good, packaging was clean and bike perfect. Also shipped with the Scorpion Race Enduro tires instead of the trail ones. Which I have been keen to try these tires for a while. Anyone running a 180mm fork? Curious if it does anything negative to the handling. I have a Rulzeman tuned Mezzer that's currently set at 180 to put on it, though I can drop it back to 170 pretty easily if needed.
Winryn
Active member
I’m really missing the extra comfort from my previous plus size tyres. I find the 2.4 a bit skinny on the rear but appreciate how tough the DD tyre is. 700 miles and no rips is a record for me.
Can anyone recommend a 2.6 tyre for the rear that’s as good as the dhr2 and just as tough? They dont do a 2.6 dhr DD
Can anyone recommend a 2.6 tyre for the rear that’s as good as the dhr2 and just as tough? They dont do a 2.6 dhr DD
Schwalbe Big Betty or Eddy Current with Super Gravity casing, both come in 2.6 and will be a lot tougher than a DD.
Conti Kryptotal Rear 27.5 x 2.6 Enduro Soft
Strive:On.
I wouldn't buy any bike with a Shimano motor.
Winryn
Active member
Have an eddy current in my basket right now thank you (betty out of stock in 2.6 at Merlin). Eddy or magic Mary for the front? Have you tried either ?
Winryn
Active member
As above
Magic Mary every time, I've got one on the front now, Super Gravity Ultra Soft, fantastic tyre all year round in the UK.
It's the updated 801 motor which is supposed to be better than ep8.. still no?
Still no
I can only speak from personal experience but everyone I know with a Shimano motor has had problems - random fault codes, power cutting out, controller issues.
Shimano's distributor / warranty support in the UK don't appear to be very helpful which has resulted in more than one of my riding mates being without a motor for a few weeks.
I wouldn't consider any bike with a Shimano motor in the UK but the back up support may be better in different regions.
Hi everyone
In some page here it reads we can't use the purion 200 display as it doesn't work together with the controller in the frame. But, can it replace it? I.e., the controller in the frame would be disconnected.
Hope this isn't answered yet, I have searched extensively, but haven't read 45 pages
Thanks
In some page here it reads we can't use the purion 200 display as it doesn't work together with the controller in the frame. But, can it replace it? I.e., the controller in the frame would be disconnected.
Hope this isn't answered yet, I have searched extensively, but haven't read 45 pages
Thanks
Mario Antony
Active member
Currently using the Eddy in 2.6 orange stripe.
It feels thougher than DHR it replaced, but it's not as gripy.
From the rides I had, it feels like a more durable tire.
Upfront, I prefer the Maxxis Assegai to the Magic (have orange stripe and purple stripe), since the Assegai can maintain a notch higher grip.
Nevertheless, if I had the Magic on sales (Say around 40), and maxxis at normal pricing (60ish), I would buy the Magic no question about.
At the same price, maxxis, without question.
For KOMs or racing, probably would go with standard tires (Maxxis).
Tires are very personall opinion, since the feeling can differ from rider to rider.
PS: use my tires tubless, without any insert.
Pressures varying between 22/26 upfront and 24/28 reae (Slippery stuff/bone dry-rock garden-fast)
It feels thougher than DHR it replaced, but it's not as gripy.
From the rides I had, it feels like a more durable tire.
Upfront, I prefer the Maxxis Assegai to the Magic (have orange stripe and purple stripe), since the Assegai can maintain a notch higher grip.
Nevertheless, if I had the Magic on sales (Say around 40), and maxxis at normal pricing (60ish), I would buy the Magic no question about.
At the same price, maxxis, without question.
For KOMs or racing, probably would go with standard tires (Maxxis).
Tires are very personall opinion, since the feeling can differ from rider to rider.
PS: use my tires tubless, without any insert.
Pressures varying between 22/26 upfront and 24/28 reae (Slippery stuff/bone dry-rock garden-fast)
Last edited:
Bosch also gets better Range out of same sized battery so it's not really true that Shimano is lighter when you consider that you could run Bosch ith lighter battery. More assistance from Bosch. If you've never had an eMTB then Shimano will feel great but if you want the best motor it has to be Bosch.
Post a photo. You need to check the chainline spec on the chainring. It should be no less than 55mm. They installed a 52mm on mine. For the FSA chainring it was printed on the inside near the center, facing the frame so you couldn’t see it installed. I had to actually pull the crank and the chainring to verify.
Just an update on my chainring saga… i contacted canyon via the warranty process and submitted pictures of the frame damage and the picture of the chainring size my bike came with. They got back to me with an offer to buy back my bike and (and after a couple emails back and forth) rebuy any bike for 10% off and $150 worth of canyon swag. I did ask if sending just a rear triangle was possible but they do not have them in the US.
It was quite a hassle bc I had already installed brakes, fork, shock, tubeless stems and invisiframe. I uninstalled everything (except the wrap). Got the new bike the other day and repeated the process with RideWrap this time. Bike was absolutely fantastic yesterday on its first ride
I will say that, although it takes them 3-4 days for the warranty claim to get started, overall their customer service was responsive and I’m happy with the result.
It was quite a hassle bc I had already installed brakes, fork, shock, tubeless stems and invisiframe. I uninstalled everything (except the wrap). Got the new bike the other day and repeated the process with RideWrap this time. Bike was absolutely fantastic yesterday on its first ride
I will say that, although it takes them 3-4 days for the warranty claim to get started, overall their customer service was responsive and I’m happy with the result.
EMTB Forums
Latest articles
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two... -
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s...