What did you buy your ebike this week?

[Slymobi]

What's the calibrated accuracy of the pump in +- psi or bar or percent?

Sorry, I have no idea what your asking but checking the tolerance on my normal floor pump with a non digital gauge it's accurate enough for me lol. I bought it for just throwing in the bag for when it's needed as I only own a floor pump and a shock pump and I don't carry the floor pump around for obvious reasons anyone who's ever had to inflate a tyre with a shock pump out and about will know it takes a while lol so was looking for a digital gauge pump and these type of things were generated in my search.... Thought why not ? And here we are

 

[Mcharza]

Bike bolts will love me for the 3 things I bought today.

View attachment 152938

I love Wera tools.

 

[iXi]

Oneup dropper and loam lever to replace the POS KS I rage dropper that was on the bike from stock

 

[Mik3F]

A pair of Crank boots

 

[Jokipea]

I also bought one of these a few weeks back that I'm finding really useful in drying the bike, does a much better job than I do with a towel. It's got great airflow which is quite powerful, has a few attachments to direct the air in different ways and the length of the lead is not bad. My only gripe with it is the power button is a press and hold.


View attachment 152870

Looks like a Clanger

 

[Slymobi]

Looks like a Clanger

I had to Google that

 

[Arminius]

I had to Google that

Me to but I still don‘t get it.

 

[Timbo]

 

[alleeex]

A lovely pair of yellow Ohlins factory race lowers for my DH38s, courtesy of the other half as my Xmas gift .

They’re being fitted by J-Tech when they have the forks to do a custom tune in the New Year and I’m weirdly excited to see how they look on my KSL and my (analog) FRS.
View attachment 152335

Well they didn’t get to go on my ebike yet, but they look awesome so have a photo anyway .

J-Tech have done a cracking job with the custom tune on the fork and shock, I don’t think I’ll ever bother riding stock suspension again as it’s just an exercise in aggravation (I find setting up suspension incredibly tedious).

 

[Amber Valley Guy]

A bottle of methylated spirits for the final degrease of the chain (I use a diesel as the main degreaser) instead of my usual boiling water and Gunk (dilutable degreaser).
Don't know if it's just me but those Linkglide chains rust like crazy as they don't seem to have any surface protection on the side plates so I decided not to use water until the weather warms up again in Spring and can be sure all the waters evaporated.

 

[Arminius]

A bottle of methylated spirits for the final degrease of the chain (I use a diesel as the main degreaser) instead of my usual boiling water and Gunk (dilutable degreaser).
Don't know if it's just me but those Linkglide chains rust like crazy as they don't seem to have any surface protection on the side plates so I decided not to use water until the weather warms up again in Spring and can be sure all the waters evaporated.

Any chance there is something on your drive train carrying or creating carbon steel particles, that may set down on the chain and cause rust stains?

 

[Amber Valley Guy]

Any chance there is something on your drive train carrying or creating carbon steel particles, that may set down on the chain and cause rust stains?

No, I think the boiling water and degreaser did to good a job of completely degreasing the chain. I fully dried the chain then used an 'all weather lube" (wax based) last time I cleaned it (a drop on every inner and outer pivot plus a drop between inner links and rollers. Came back a few days later (this was over Christmas) and everywhere without the lube was was going rusty (I'd done one 20 mile ride with the wax lube before I put the bike away for Christmas for 3 or 4 days). So I'm going back to an oil lube and avoiding water as I'd rather have a thin film of oil on the chain than red rust. All weather lube is useless in British winter slop imo.

 

[iXi]

I'd use petrol, then degreaser then finish with metho to get the chain perfect then I would apply a wax bath.

Now I just apply squirt and don't even remove the factory grease. Too much stuffing around.

 

[Matt van]

this week nothing but he got peatys tubeless setup for Christmas from that Fat guy in red, and loving it BIG time, the Stans didnt cut it. the valves ate lovely but at $50ish theyre a lot but really nice, Krush drive train cleaner and ebike chain wax its so smooooth now

 

[whitymon]

Hmm weird that Stans did not make it, why? You got a flat and it did not work or you liked the smell of peatys product

On my end I use the peatys premium lube for a year and it is really good, that said I wonder to go full wax (bath) but honestly wax seems more heavy on cleaning chain in/chain out - and cost as you would need a new master link each time. I also don't know how bad it would be with low and idler pulley as it could store and keep debris in it.

Squirt lube looks good but I wonder if I would see any difference. Honestly I clean after every ride my chain and relube it and go full degrease it maybe after 5 ride.

 

[alleeex]

Re: waxing -- if you use the new Silca Strip Chip you can wax a chain with factory grease on it, none of this faffing around doing degreasing baths with solvents. I used it over the spring/summer/autumn and it was great. I do prefer to use Molten Speed Wax so I was doing the first 5-10 waxes of a new chain using the Silca Strip Chip w/Silca Ultimate wax*, and then I'd switch to MSW.

I also didn't bother with a new master link each time, just replace them when they get a bit soft and you don't hear the "click" when refitting. I'd get about 10-15 uses out of a single master link which was perfectly acceptable.

I've gone back to lube (Silca Synergetic wet lube) for the worst of the winter because I'm using a SRAM GX chain and these rust very quickly if they're waxed and get wet. The XO and XX chains are plated with something so they don't seem to suffer with it. I'll replace the GX chain with an XO one when I can find one that isn't £80!

*This would get decanted into a tub to be saved for the next new chain to be waxed.

 

[Bear-uk]

I bought some matching peatys grips
Specsavers visit due

 

[The Hodge]

I bought some matching peatys grips
Specsavers visit due
View attachment 153140

Not needed mate as both grips are the same colour

 

[Mackeminexile]

Float X2 Factory for my 23 Orbea Wild. Usual PITA, had to knock the bearing out of the fitting to install. It's upside down (trunnion mounted at the bottom). Stupid frame then impedes the air valve so needed a 90 degree adapter that wasn't longer at the valve than 24mm. Found one and all sorted. Except it's unridden as the snow in Calderdale is mental

 

[steve_sordy]

I needed a Schrader valve adapter for my Airshot tubeless tyre inflater. Could not find one anywhere that I could order with confidence that it would fit. So I emailed Airshot and asked them to send me one. The guy there was going to charge me £5 for it delivered. I emailed back asking for the method of payment and he said don't bother and just sent me one! Nice! And it works!