What did you buy your ebike this week?

Arminius

Well-known member
Subscriber
Jul 26, 2022
591
988
Rhein-Ruhr Delta, Germany
…….
I don’t rip or tear my gear that much …but it gets dirty. Most of the time it magically cleans itself overnight …how?
Lucky you that they have come to your place after being driven away by a nosy woman and had never been seen again so we have to do all work ourselves! The Heinzelmännchen (German pronunciation: [ˈhaɪntsl̩ˌmɛnçɛn] ) are a helpful household spirits or kobolds associated with the city of Cologne in Germany, akin to brownies of Scotland.

If you want to keep them make sure your wife stays in bed overnight. 😉

IMG_3479.jpeg
 

EMTBSEAN

E*POWAH Elite
Subscriber
Feb 20, 2020
1,034
732
Sheffield
Duct tape will remove hair from your chest just as good as Gorilla tape …me thinks? My problem is nose hair 😳.(pro tip…don’t use fire 🔥).
Nose hairs are no problem, I use wax and a stick, rip the buggers out at the roots, it takes weeks for them to grow back if done this way, if I’ve got no wax, a pair of stout tweezers will do nearly as well just on a smaller scale, just make sure you flush them away properly down the toilet 😁👍
 
Last edited:

Tubby G

❤️‍🔥 Hot Stuff ❤️‍🔥
Dec 15, 2020
2,696
5,421
North Yorkshire
Nose hairs are problem, I use wax and a stick, rip the buggers out at the roots, it takes weeks for them to grow back if done this was, if I’ve got no wax, a pair of stout tweezers will do nearly as well just on a smaller scale, just make sure you flush them away properly down the toilet 😁👍

Last time I was on holiday in Turkey I took myself off for what I thought would be a quick haircut at a bargain price.

I had my haircut, great job, but what followed was the last thing I expected. Two large blobs of hot melted wax shoved up my nostrils, followed by the insertion of a cotton wool bud in each orifice. Wait five minutes to cool down and set and then a short sharp pull to tug them out. Ouch!! Every single trace of nasal hair was cleanly removed!
 

EMTBSEAN

E*POWAH Elite
Subscriber
Feb 20, 2020
1,034
732
Sheffield
Last time I was on holiday in Turkey I took myself off for what I thought would be a quick haircut at a bargain price.

I had my haircut, great job, but what followed was the last thing I expected. Two large blobs of hot melted wax shoved up my nostrils, followed by the insertion of a cotton wool bud in each orifice. Wait five minutes to cool down and set and then a short sharp pull to tug them out. Ouch!! Every single trace of nasal hair was cleanly removed!
Yep that’s what I use, a DIY nose hair wax kit, I’ll be first to admit it hurts the first couple of times but after that it’s completely painless, I’ve been doing it for years, most of the time I can’t be bothered buying a kit so I just rip them out with a wide ended pair of tweezers 👍
 

The EMF

🔱 Aquaman 🔱
Subscriber
Nov 4, 2020
1,262
2,387
South East Northumberland
View attachment 148389 View attachment 148390 Some more Dfyrs gear. Think Iv qualified for shares in them haha
some more socks have all them now due to free pairs with orders
also bought some of their trousers in August never Wear trousers ever and I mean ever even at work in winter
call me converted after 2 rides so light no weight to them 4 way stretch absoulte quality
first time at glentress early sept on a windless hot day. Yeah glentress hot 😝
Then on Sunday at kielder on a cool damp day but as there Not waterproof but DWR me arse was wet and me skiddies aswell
So does anyone know of waterproof short liners or waterproof bib shorts without busting the bank

also sized upto XXl but there way to big on the grey second pair XL fit perfect not sure why I sized up 🤦‍♂️
back they go

Yep, line your growlers with steam grade axle grease, not too comfortable but water proof 🤤
 

RustyMTB

E*POWAH Elite World Champion
Jul 22, 2020
2,848
6,887
UK
You people are weird. Anyway, I'm only here to say wheel manufacturers like for example RACEFACE who offset their valve holes such that they slope on the rim & therefore don't seal no matter how much you tighten the valve will be first against the wall when I become president.
 

Mcharza

E*POWAH BOSS
Aug 10, 2018
2,616
5,389
Helsinki, Finland
Last time I was on holiday in Turkey I took myself off for what I thought would be a quick haircut at a bargain price.

I had my haircut, great job, but what followed was the last thing I expected. Two large blobs of hot melted wax shoved up my nostrils, followed by the insertion of a cotton wool bud in each orifice. Wait five minutes to cool down and set and then a short sharp pull to tug them out. Ouch!! Every single trace of nasal hair was cleanly removed!
Turkish revenge on the British island nation.
 

EMTBSEAN

E*POWAH Elite
Subscriber
Feb 20, 2020
1,034
732
Sheffield
I tried the tweezers on one nose hair. It hurt like hell and it bled, a lot. Not tried that since. :eek:
I cannot imagine what a complete nose job would feel like. :oops::poop:
It does hurt like hell the first few times Steve, after that it gets easier and painless mate, I speak from experience, the advantages outweigh the disadvantages especially like me I have restricted nasal passages ☹️
 

Arminius

Well-known member
Subscriber
Jul 26, 2022
591
988
Rhein-Ruhr Delta, Germany
Gentlemen! Behave! My impression of one or the other is currently taking on completely new features!

Right time for safety moment! You may not have heard about morbus kobold, what appears to be a german thing as not for export, but a note to those of you who appear like to experiment, a milk frother is not suitable!

IMG_3480.jpeg


BTT with what did you buy your ebike this week? 👍😉
 
Last edited:

steve_sordy

Wedding Crasher
Nov 5, 2018
8,981
9,381
Lincolnshire, UK
I have just ordered some brake pads from Merlin Cycles (half price) for my grandson's Orange 5 RS, new in 2015. In 2020 it was expertly refurbished by James, a member on here, but I can't recall his username. It was a Covid project, but he took up emtb and hardly rode it after that! So he sold it to me in 2021 and I gave it to my grandson for his birthday (he was so excited, I thought he was going to have a heart attack. :ROFLMAO:)

The pads were ones I'd not come across before Shimano G05S-RX - Resin.
They still look like brake pads, so you don't need a pic.
 

Mikerb

E*POWAH Elite World Champion
May 16, 2019
6,553
5,042
Weymouth
just to save some of you guys some pain....both nose and bum hairs are there for a reason!! Just cut off any annoying/protuding excess. Now eyebrows are a different matter altogether!!

Just to legitimise this post ......I just bought some ergon GA3 grips to help alleviate recent onset of right hand thumb pain....and they work...like them.
 

Zed.

Active member
Apr 26, 2023
167
224
Deepest Bandit country (Wales)
My Dorado Pro's eventually arrived yesterday, were shipped from Germany by dhl & some reason turned around and returned to sender - believe by customs 🤷‍♂️
second try at shipping worked but I got caught for vat & import so the forks worked out £1200 (~£900 & vat & import:cry:)

I must admit to have expected the extra costs and they were still cheaper than buying here in the UK so:cool:

vRPtg05.png

these are december 2023 dated and have the newer twin-bolt top crowns.

VQMHB1y.jpeg

shiney things:p

3d8yEoK.png

Carbon fiber main tubes (y)

they've the 20x110 axles so I needed wheels / hums to build, being a collector of things I had bought stuff from Wiggle before they closed and this included 3 Nukeproof Neutron wheels (20x100 in 29") as they were cheap ~£25 each!
when I checked these there were 2 @ 20x110boost and one @ 15x100 so luckily I'd been sent 3 wrong wheels but 2 were just what I needed(y)

now to play with my new toy that I cant ride due to injury....

Rich.
 

Jasong911

Member
Sep 27, 2023
39
54
Lakewood, CO USA
Got a 27.5 rear wheel that had all the right stuff for a cassette and rotor swap and was equipped with a CushCore and superboost. So now I’m all mullet-ed.
I’ve ridden it some and can’t say with certainty that’s it’s better but I can feel the CushCore back there.
IMG_1105.jpeg
 

Hattori-Hanzo

Well-known member
Apr 10, 2023
419
555
UK
My Dorado Pro's eventually arrived yesterday, were shipped from Germany by dhl & some reason turned around and returned to sender - believe by customs 🤷‍♂️
second try at shipping worked but I got caught for vat & import so the forks worked out £1200 (~£900 & vat & import:cry:)

I must admit to have expected the extra costs and they were still cheaper than buying here in the UK so:cool:

vRPtg05.png

these are december 2023 dated and have the newer twin-bolt top crowns.

VQMHB1y.jpeg

shiney things:p

3d8yEoK.png

Carbon fiber main tubes (y)

they've the 20x110 axles so I needed wheels / hums to build, being a collector of things I had bought stuff from Wiggle before they closed and this included 3 Nukeproof Neutron wheels (20x100 in 29") as they were cheap ~£25 each!
when I checked these there were 2 @ 20x110boost and one @ 15x100 so luckily I'd been sent 3 wrong wheels but 2 were just what I needed(y)

now to play with my new toy that I cant ride due to injury....

Rich.
They look amazing, keep us posted with what you think once you've recovered 👍
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

554K
Messages
28,016
Members
Join Our Community

Latest articles


Top