SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

TCFlowClyde

Active member
Feb 26, 2022
1,341
866
Mesa, AZ
Bro, u ever ask Linda closer photo of charger port on CEF50 and ask her about the spare? worried about the charger hole cover not lasting long like Dengfu. Or is there any subtitute for it.
This is the best shot of it so far. You could ask to get a close up with the cover open to see more details. I doubt it's more than a plastic/rubber cap and hinge that could break off far before the lifetime of the frame.

Maybe somebody can create a DIY version. Perhaps, imbed or glue a magnet and metal spacer on it to help keep it covered securely for a nice bike hack?🤛

Screenshot_20221216-084950.png
 

temon10

Well-known member
Feb 8, 2022
674
562
Malang, Indonesia

mike_kelly

Well-known member
Subscriber
Aug 11, 2022
939
772
US
I don't like that one because the door just slides over the socket. The Bafang appears to push into the socket forming a seal.
PowerPlug.png
 

stuff

Active member
Nov 3, 2022
166
281
Spain
Haha waiting sucks for sure!

Hopefully, @stuff will gets his first soon to do a quick unboxing and weight once assembled.

Afterall, being first has it's responsibilities.

Yep, mines shipping tomorrow as confirmed with Linda, was waiting for the charger but arrived today.
I’ll make an unboxing video + buildup and details to share them here :)
Also i’ll have to take out motor and battery to properly weight the frame and each part
 

TCFlowClyde

Active member
Feb 26, 2022
1,341
866
Mesa, AZ
Yep, mines shipping tomorrow as confirmed with Linda, was waiting for the charger but arrived today.
I’ll make an unboxing video + buildup and details to share them here :)
Also i’ll have to take out motor and battery to properly weight the frame and each part
Sounds great! Looking forward to it!🤙
 

mike_kelly

Well-known member
Subscriber
Aug 11, 2022
939
772
US
From the specs my charger is a CHG C01.2A.EN which has a plain two conductor 8x12 pin. No fancy monitoring. So any two pin connector that fits the opening and has the current capacity should work. Go weather seal is important to me.
Maybe:

Socket1.png
Socket2.png
 

mike_kelly

Well-known member
Subscriber
Aug 11, 2022
939
772
US
To those who have assembled an emtb before. Is the controller a separate box or will it be inside the motor?
 

TCFlowClyde

Active member
Feb 26, 2022
1,341
866
Mesa, AZ
Alright...I'm ready to build up my CEF50 720Wh Enduro build! 🤙

The last few pieces of blue bike bling (all matching Deity seat collar, headset cap and spacer set) came in the other day to further bejewel the living room couch with my "shrine of mtb eye-candy".
PXL_20230328_195638300.jpg

It's been steadily collecting dust since late December '22. Finally it's almost time to mount them up for bike install... just waiting now for the frameset...and waiting...and waiting!😁
PXL_20230328_195656899.jpg
 
Last edited:

Stephen B

Member
Feb 24, 2021
107
53
El Dorado Hills, California USA
Alright...I'm ready to build up my CEF50 720Wh Enduro build! 🤙

The last few pieces of blue bike bling (all matching Envy seat collar, headset cap and spacer set) came in the other day to further bejewel the living room couch with my "shrine of mtb eye-candy".
That is a lot of fancy stuff you got there (nice), mine is going to be more a Craigslist parts build (I did find some really good used pieces though).

Can't wait to see you start building, be sure to document really well so I can follow your instructions.

Stephen
 

TCFlowClyde

Active member
Feb 26, 2022
1,341
866
Mesa, AZ
That is a lot of fancy stuff you got there (nice), mine is going to be more a Craigslist parts build (I did find some really good used pieces though).

Can't wait to see you start building, be sure to document really well so I can follow your instructions.

Stephen
Wherever you source your components, is all good. Some of mine are used from E-Bay, some is second-hand taken off my other builds, and others new are from AliExpress, Walmart, and random.👍

Hoping @stuff will produce the quality review.💪

I'm just gonna stay simple with a basic post of my build weigh-in, and then just get pedaling ASAP for a shake down ride and quick-and-dirty performance review of my experience.

Then I'll leave it up to others to be more detailed like RobRides if so inclined.😉
 
Last edited:

TCFlowClyde

Active member
Feb 26, 2022
1,341
866
Mesa, AZ
He is completely silent on this thread, which I find a little weird.
No, check above. I think he's stoked.🤙 He said was good for a comprehensive review and unboxing and weighing.

I'm sure others will too... probably some good YouTube vid down loads. It's should be X-mas exciting for many reviewers.😃
 

temon10

Well-known member
Feb 8, 2022
674
562
Malang, Indonesia
what do u think guys if I put Rockshox Pike Ultimate 29er 140mm on this frame and 27.5 rear? Me not going jumping, just adventure riding. U think with 170mm default crankset will often pedal strike?
 
Last edited:

TCFlowClyde

Active member
Feb 26, 2022
1,341
866
Mesa, AZ
My m600 at 150 mm (30% sag) had big pedal strikes at stock 170 cranks. I went down to 155 mm....much, much fewer.👍
 

mike_kelly

Well-known member
Subscriber
Aug 11, 2022
939
772
US
Yep, mines shipping tomorrow as confirmed with Linda, was waiting for the charger but arrived today.
I’ll make an unboxing video + buildup and details to share them here :)
Also i’ll have to take out motor and battery to properly weight the frame and each part
Get tracking info yet? :)
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

555K
Messages
28,045
Members
Join Our Community

Latest articles


Top