not available in my country it seems, the link is dead for me ...50.4V 5A 12S 44.4V LCD Dispay Li-ion Lipo Battery OLED Display Fast Charger OHRIJA
50.4v 12s Battery Charger | 50 4v 12s Battery Charger | 12s Smart Battery Charger - Chargers - Aliexpress
Smarter Shopping, Better Living! Aliexpress.coma.aliexpress.com
Here from Germanynot available in my country it seems, the link is dead for me ...
great thanks! I don't know why I struggled so hard to find this...
My CEF50 has an adapter cable.Only one problem, the speed sensor plugs don’t match with with a 8pin connector on the motor and a 4 pin on the sensor wire. Motor runs for a couple secs then trips on speed sensor fault as it isn’t connected.
Does anyone know if this can be overridden or the control mode changed with the besst tool, while I wait for the correct sensor to arrive?
My CEF50 has an adapter cable.
My motor was supplied with a different set of cables. I have a 8pin next to the power supply which changes to a five pin into the handlebar display (I have no idea what happens to the other 3 pins?). The display then daisy chains to the switch.
Where abouts in n.z are you? Would be keen to check the bike out before i order my frame if your anywhere near meYes the tires are relatively heavy. The areas where weight could be reduced are the tires, cranks, bafang chainring spider, dropper, and perhaps titanium bolts? probably another ~ 1kg
The standard bafang chainring, bolts and spider are very heavy (all steel) - a bit strange given the efforts to save weight in the motor.
Breakdown of cost and weight below, I weighed all components and the overall bike after, matched pretty well!! View attachment 120606
I can check on my frame once I have the crown raceDoes anyone know the shortest length fork steerer tube that can be used with a medium frame or could someone measure the headset etc so i could try work it out.
Cheers
I’m in New Plymouth, you are most welcome to check it out!!Where abouts in n.z are you? Would be keen to check the bike out before i order my frame if your anywhere near me
Can confirm the bearing presses directly into the frame and the bearing sits directly on the crown race. No cups.My guess is, that you need something like this:
Headset Lower part 40 1.5 IS52/40
Features Material: 6061 T-6 Aluminium / Steel Type: IS52/40/H1 Bottom Type: IS - Integrated Bottom Head Tube Inside Diameter: 52mm Crown Race Seat Diameter: 40mm Bottom Stack Height: 1mm Bottom Bearing...www.bike-discount.de
Crown race + bearing. IS denotes integrated headset and the number 52 denotes bearing diameter.
IS52 is common for tapered forks, but check the dimension, if this is acually the correct one for this frame.
Did you receive the upper hardware for the shock ?The
Can confirm the bearing presses directly into the frame and the bearing sits directly on the crown race. No cups.
The bearing surfaces are angled to recess into the frame and match the crown race
The frame comes with the hardware for one end of the shock only. The other end needs a 22.2mm m8 bolt with spacers specific to the shock.Did you receive the upper hardware for the shock ?
I don’t find it in the box and it seems it’s specific to the frame, I can’t really find it online
I will double check on my side but I haven’t seen it. I’ll ping Jim if it’s not in the boxThe frame comes with the hardware for one end of the shock only. The other end needs a 22.2mm m8 bolt with spacers specific to the shock.
The World's largest electric mountain bike community.