Levo SL Gen 1 Levo SL 2023 Megathread
- Thread starter Killswitch73
- Start date
whywedowhatwedo
Member
432mm chainstays… i wonder what pivot and superboost have to say about this.
liking the solid eSTA (can steepen by .5) and more conservative reach. always felt a little extra pressure on the hands on the levo 3 vs my levo 2. curious what stem length they’ll use on an s3.
liking the solid eSTA (can steepen by .5) and more conservative reach. always felt a little extra pressure on the hands on the levo 3 vs my levo 2. curious what stem length they’ll use on an s3.
Last edited:
George_KSL
Active member
Unless there are still mistakes, I do like the numbers, they suggest Specialized keeps to their usual focus on broad appeal. The bicycle is rather short-ish in reach, has more traditional seat position in back, but gets aggressive head angle and long (for trail bike) & plush suspension numbers.
That is much more attractive and easier to ride for majority of people than something like Pivot Shuttle SL. And it's also what Trek EXe TQ would be if it had bit more squish. It's also smart decision to not make niche bike even more niche (by giving it full EVO numbers and cannibalizing Kenevo SL, though I wonder if they regret having two SL bikes, I am happy they do though).
That is much more attractive and easier to ride for majority of people than something like Pivot Shuttle SL. And it's also what Trek EXe TQ would be if it had bit more squish. It's also smart decision to not make niche bike even more niche (by giving it full EVO numbers and cannibalizing Kenevo SL, though I wonder if they regret having two SL bikes, I am happy they do though).
My LBS was not aware on the available colors in Europe for the release day but all the communication they received were showing the black version.
Tuesday during the zoom training they will know about colors, delivery dates and so on...
ebikerider
Active member
I wonder if this will steepen the head angle to 65+?
Ymersmoelf
Member
New Kenevo SL with the new motor PLEEEEAAASSSEEEEE!
Eduardoramundo
Well-known member
I would think that is inevitable once they have used up all the old 35nm motors.
I saw a geo chart on bikeradar and my understanding is that you can change just the chainstay adjustment and when combined with a 29" rear wheel, geo is all exactly the same except for the longer CS length.
Unfortunately if you tried to combine the 29" CS position with say a 27.5" rear wheel to get the long CS length, you'd get a considerably slacker STA & lower BB height.
The SL also has a high/ low shock adjustment which steepens the sta/ hta around .5' and raises the BB height about 5mm independent of rear wheel.
Personally, I like full 29er. However I just built a new 27.5" rear wheel that I'm pretty determined to use on this build.
I do suspect that a new KSL will be released with similar updates next year that'll hit my personal targets a bit better. For me, I'm always on 150/160 bikes and it feels right for pedaling so I want the Enduro geo, on AM travel. But I'm probably an outlier in this regard.
Last edited:
Desert_Turtle
Active member
You guys ever think that maybe Specialized leaks stuff on purpose and even leaks some “fake news” just to stir the pot and keep the conversation going? They already had their dealer webinar a couple of weeks ago here in the US. All the info, other than the geo specifics, has already been shared with the dealers. It’s crazy how even after most of the info was out there people were still speculating.
ghoststalker
New Member
Or as Barney Stinson would describe it "create a mystery about yourself"
I think you can never be sure what was by accident and what was on purpose. I think both is possible. Look at Apple's, Samsung's, Nvidia's, Intel's, AMD's product launches. There is always infos out there from people who "where often right".
Very curious about the noise of the motor.
George_KSL
Active member
The BikeRadar article above first mentioned 30-40perc. reduction, which would be nice but not whisper-quiet, but then specifically the reviewer mentions it is in fact whisper-quiet later in first impression section. So who knows which one it is. Definitively curious.
OK .. my last one .. only a few days now ...
Hoppy
Member
Has anyone seen the crank arm lengths for the different frame sizes?
Olivier Clg
Member
Comp 7900€
S-Works 14000€
D
Deleted member 7401
Guest
The full hi res pictures are all over the internet…hilarious the mods still try and control the convo…
cjc.emtb
Member
I do have a PDF version of the article. Let me know if you want it.
whywedowhatwedo
Member
it was posted earlier - 170 for s2-5
Yes plz
whywedowhatwedo
Member
me too!
baltik
Member
Ditto!
Don't think this is overly important to worry about sharing...
FYI .. or for Future reference when anyone searches ..
Levo Gen2 SL is compatible with the existing range extender (98920-5640) - but you need a 145mm cable and not a 160mm cable like the Gen1 SL . KSL is 285mm.
FYI .. or for Future reference when anyone searches ..
Levo Gen2 SL is compatible with the existing range extender (98920-5640) - but you need a 145mm cable and not a 160mm cable like the Gen1 SL . KSL is 285mm.
Last edited by a moderator:
MLX John
Active member
Sure, that'd be great!
Me too
ThanksThrillhouse
New Member
Can I get a copy please
Similar threads
EMTB Forums
Latest articles
-
Santa Cruz Vala X0 review - a new approach to perfection?
The new Vala is Santa Cruz’ first attempt on a Bosch-powered emtb. Like...- Knut Nes
- 6 min read
- Views: 2K
- Reaction score: 5
- Comments: 9
-
A new standard for charging ebikes is coming? A quick interview with Bosch - charge2bike
I had a quick chat with dr Vikram Godbole about "charge2bike", a new...- Knut Nes
- 2 min read
- Views: 1K
- Reaction score: 7
- Comments: 5