commencal 2021
- Thread starter Mr Scooter
- Start date
noblige
Member
shenchman
New Member
nice! wrap the chainring end in electrical tape if you're concerned about scratching black paint!
FYI this was bad info. Color is not even close, now that Fedex got their head out their butt and finally delivered the bike (!) I can compare. The hunt continues...
noblige
Member
Can somebody with Signature please check: did XT brakes come with metal or resin pads? I’m not at home and need to buy a spare set. Thanks!
Not sure how to tell? Looks like resin to me
shenchman
New Member
resin
What is the wrap you are using?
shenchman
New Member
AMS Honeycomb Frame Guard Total. CLEAR
CLEAR, Total size version of the famous AMS Honeycomb Frame Guards designed to totally cover your main triangle, stays, fork and extra parts. Get rid of chips and scratches and keep a higher reselling value of your bike.
www.allmountainstyle.com
I custom sliced one of the large long pieces probably designed for the top of the downtube in half to protect the edge of the frame where it meets the battery. top of the downtube isn't really vulnerable, sides are.
in other news I removed the single volume spacer from the float x2 shock which is super easy to do, much more plush now.
jbrown15
Well-known member
AMS Honeycomb Frame Guard Total. CLEAR
CLEAR, Total size version of the famous AMS Honeycomb Frame Guards designed to totally cover your main triangle, stays, fork and extra parts. Get rid of chips and scratches and keep a higher reselling value of your bike.
I custom sliced one of the large long pieces probably designed for the top of the downtube in half to protect the edge of the frame where it meets the battery. top of the downtube isn't really vulnerable, sides are.
in other news I removed the single volume spacer from the float x2 shock which is super easy to do, much more plush now.
View attachment 44917
View attachment 44918
View attachment 44919
View attachment 44920
View attachment 44921
View attachment 44922
Does Commencal have known issues with paint quality?
What do you mean by "plush"?
Since, the only thing that should be more plush by removing vol. spacer is bottom out resistance... ?
You ruined it, its all dirty now! ?AMS Honeycomb Frame Guard Total. CLEAR
CLEAR, Total size version of the famous AMS Honeycomb Frame Guards designed to totally cover your main triangle, stays, fork and extra parts. Get rid of chips and scratches and keep a higher reselling value of your bike.
I custom sliced one of the large long pieces probably designed for the top of the downtube in half to protect the edge of the frame where it meets the battery. top of the downtube isn't really vulnerable, sides are.
in other news I removed the single volume spacer from the float x2 shock which is super easy to do, much more plush now.
View attachment 44917
View attachment 44918
View attachment 44919
View attachment 44920
View attachment 44921
View attachment 44922
shenchman
New Member
volume spacers affect a significant portion of the stroke, not just ultimate bottom out resistance. air is a non-linear progressive spring to begin with per complicated fluid dynamics/physics.
my definition of plush is a feeling of linearity while using nearly the whole range of travel & not just on big drops, big drops I'd rather use HSC to resist vs a progressive spring, which I find makes the bike feel like it has & is using less travel.
just personal preference & very specific to a given bike's squat/compression curve/geometry
ShaneBean
Member
Bike is in. Stem was smashed by something in shipping small paint missing, top right bar stem screw is bent. Also they sent me a euro plug for the charger. Bike came with no charge and wrong plug. Ordered sept4th. This is a XL meta power 29 essential. Ride notes to follow, after I goto bestbuy buy a plug converter and get a charge.
What brand of bike stand is that?
That's how preferences vary ?
I like my suspension plush only at the beginning of the travel and a very responsive mid travel to "push" against. I also prefer a progressive spring curve to increased (hs) compression damping, to keep the bike more lively.
But I think you would need to remove far more than one spacer, to really feel a difference in the mid stoke.
The avocado "greenish" color looks even better than on the commencal site ?
The composite pedals are also looking quite usable, maybe something for a dirt bike build ?
My SX will arrive next week, it's in Toulouse right now. Ordered last sunday.
Last edited:
noblige
Member
It's BIKEHAND 29er Floor Stand (from Amazon), but it does really fit Power because of magnet sensor near rear axle - I'm looking for something else myself.
First impressions: EP8 is sweet. More power than e8000 and much more sensitive to torque demands when pedaling. QUIET!
What about the dreaded rattle? Yes I can hear it, but only if I pay attention to it. With the hills around here I am mostly concentrating on not dying so the rattle aint nuthin.
So far not a fan of the XT shifters. My 2019 Meta Power race had SRAM GX and my Santa Cruz SRAM XO. I like those better. The XT's feel cheap and plasticy to me. May upgrade.
I have never had a fox float x2 so the adjustments seem a bit daunting for now.
Sweet looking bike for sure
What about the dreaded rattle? Yes I can hear it, but only if I pay attention to it. With the hills around here I am mostly concentrating on not dying so the rattle aint nuthin.
So far not a fan of the XT shifters. My 2019 Meta Power race had SRAM GX and my Santa Cruz SRAM XO. I like those better. The XT's feel cheap and plasticy to me. May upgrade.
I have never had a fox float x2 so the adjustments seem a bit daunting for now.
Sweet looking bike for sure
Last edited:
ShaneBean
Member
Received and tested the same day? My battery came super duper low.
rb.
Active member
Water bottle bolts are dumb. Too short for most cages I assume. I had to break out the hacksaw to size some to fit.
Duggan
Active member
Duggan
Active member
my meta sx was recalled by Commencal yesterday, as they forgot to mount an interface bracket between engine and frame. apparently it is the only my meta Power shipped with this problem. Shimano-requested upgrade that Commencal does on all bikes before shipping them. I've to ship the bike to Andorra wait 2 weeks. I'm really pissed off. I am happy for Commencal's seriousness for having warned me and made themselves available to solve any problem.
beneseleve
New Member
Hi all!
Will get my meta sx on tuesday. I ordered the rise version with the zeb fork with factory compression setting. Do you think the upgrade to charger rc2.1 is worth it or should i stick with the settings rockshox think is the best? Has anyone experience with factory compression settings?
Will get my meta sx on tuesday. I ordered the rise version with the zeb fork with factory compression setting. Do you think the upgrade to charger rc2.1 is worth it or should i stick with the settings rockshox think is the best? Has anyone experience with factory compression settings?
I would see how you get on with it first, still a lot of adjustment on that fork and will be fine for most people - give it a few months and you can always swap it out later.
Duggan
Active member
As R120 says, give it some time, if you do decide to change just time it in when the forks are due a service.
EMTB Forums
Latest articles
-
Bosch-powered Merida is here – the eOne-Sixty SL and eOne-Eighty intro and test
Merida has used Bosch-motors for years, but not on the emtbs. The full...- Knut Nes
- 10 min read
- Views: 4K
- Reaction score: 5
- Comments: 9
-
Bosch ABS Pro and Trail Pro - an interview about the new ABS profiles
When testing the new Bosch Performance CX gen5, we were also introduced...- Knut Nes
- 2 min read
- Views: 6K
- Reaction score: 2
- Comments: 5