markus datgloi
Member
See the first 6+ minuts. Maybe I missed it but any follow-up with a real test + results with 1 or more E-mtb's ?
Bafang M500 V2 vs Bosch Gen 4
- Thread starter Rob Rides EMTB
- Start date
See the first 6+ minuts. Maybe I missed it but any follow-up with a real test + results with 1 or more E-mtb's ?
PadreParada
Member
I also have the M600. Could you please explain how may I smooth it with the Besst tool?
doctorrevenge
Member
I asked Bafang for new software for my m500 36V 15A v7.5 and get a Update 36V 17A v7.7
Now it is stronger then my wifes cx4. Perfekt! I love bafang
with my old bbs01 on 18A i have no Problems over 4 year! Maybe a Update for 48V m500 is ready?! Bafang write me that i can buy a m600 and get a 36V 25A firmware for it when the new Software is not strong enough for me, but it is strong enough!!!
Now it is stronger then my wifes cx4. Perfekt! I love bafang
with my old bbs01 on 18A i have no Problems over 4 year! Maybe a Update for 48V m500 is ready?! Bafang write me that i can buy a m600 and get a 36V 25A firmware for it when the new Software is not strong enough for me, but it is strong enough!!!
Can you document for others how you did this update as most people seem to be struggling to get the necessary hardware and software from Bafang.I asked Bafang for new software for my m500 36V 15A v7.5 and get a Update 36V 17A v7.7
Now it is stronger then my wifes cx4. Perfekt! I love bafang
And also how you contacted Bafang and again, most people have been unable to just buy the M500 or M600 on it's own.
doctorrevenge
Member
I buy a besst Tool at Luna. The Bafang Team wanted my SN from the Motor and send me an update… Flashing with besst Tool in 1min maybe someone Can make a program to change the current power manualy in firmware files… like the old software for bbs motors.
maybe someone Can make a program to change the current power manualy in firmware files… like the old software for bbs motors.
Last edited:
doctorrevenge
Member
Sorry for my english
doctorrevenge
Member
No automatic Download... i tested it...
please could you communicate the revision of your new software
doctorrevenge
Member
thank you, we have the same hardware but not the same soft. mine is
| CRX10NC4810I142015.5 |
where we can found the soft update ?
Last edited:
How you was able to contact Bafang?
I am trying to write them but no answer, @doctorrevenge could you ask them for latest strong F/W for M500 in 48V version? I am sure few people form here could be also interested in.
I am trying to write them but no answer, @doctorrevenge could you ask them for latest strong F/W for M500 in 48V version? I am sure few people form here could be also interested in.
Could you share this 48V 18A f/w for M500?
I think you are in the best place (poland) to collect the later data, bafang eu center is located in poland
I do not how ? it is installed on my controller and the only files found to update the software (endlessphere) are for M600
Probably i will be first and last person with M500 in Poland
I though you have this f/w in files, this 48/18 you have is the 'stock' f/w ? When you bought a bike? I am curious because mine is in shipping and i am curious how fresh f/w i will have.
48V x 18A seems to give 864W in peak, so quite good.
I though you have this f/w in files, this 48/18 you have is the 'stock' f/w ? When you bought a bike? I am curious because mine is in shipping and i am curious how fresh f/w i will have.
48V x 18A seems to give 864W in peak, so quite good.
doctorrevenge
Member
18Ax48V must be a m600 not a m500
Yes it that is installed on my controller (currently in poland for repair). i have not found official link to recover soft update and bafang do not communicate (officialy) with the customer. may be it a question to ask to the supplier (dengfu). They don't answerd at begining when i have request help to solve my failure, but it seem they have evoluate now and they accept to support her customer and perform interface with bafang. but it is very complicateProbably i will be first and last person with M500 in Poland
I though you have this f/w in files, this 48/18 you have is the 'stock' f/w ? When you bought a bike? I am curious because mine is in shipping and i am curious how fresh f/w i will have.
48V x 18A seems to give 864W in peak, so quite good.
no the M500 purchase to dengfu are in 48V18Ax48V must be a m600 not a m500
doctorrevenge
Member
Ah... ok... but no legal 250W Europe Version
Guys, @patdam and @doctorrevenge it seems you have some contact with bafang/dengfu. Could you ask them for 48V f/w for M500?
If they dont give a response then nothing will happen, but if yes, few people here will be more than happy
@doctorrevenge the 48/18 is fully legal, its peak power, but M500 is rated as 250W in "nominal". Peak and nominal are different story, you may have 250W in nominal and 860W in peak and its legit.
If they dont give a response then nothing will happen, but if yes, few people here will be more than happy
@doctorrevenge the 48/18 is fully legal, its peak power, but M500 is rated as 250W in "nominal". Peak and nominal are different story, you may have 250W in nominal and 860W in peak and its legit.
M500 and i wait an purchased M600. not to have more power. but i think they are most reliable than M500
Ah... ok... but no legal 250W Europe Version
more or less legal, they are limited to 25 km/h max (and not possible to modified) but it have a throttle and effectively not eu rule compatible. but if you use the throttle only for walk mode you are fully in line with rule spirit
doctorrevenge
Member
Peters M500 See only about 500W peak with 48V. I think the m500 for dengfu are stronger?!?! Maybe different Hardware?
Last edited:
Guys, @patdam and @doctorrevenge it seems you have some contact with bafang/dengfu. Could you ask them for 48V f/w for M500?
If they dont give a response then nothing will happen, but if yes, few people here will be more than happy
@doctorrevenge the 48/18 is fully legal, its peak power, but M500 is rated as 250W in "nominal". Peak and nominal are different story, you may have 250W in nominal and 860W in peak and its legit.
you know i'm a lot tired to fight with dengfu and bafang, i wait my repaired controller return or to reciving the additional motor purchased in spare and i hope to never more needs to their request something
It is not in my (long) list of contact, may be the good one ? because with the others it is a nightmare
Could you share some contacts (here or PW)? I will try to reach them.
Maybe the first, but not the last ???Probably i will be first and last person with M500 in Poland
I though you have this f/w in files, this 48/18 you have is the 'stock' f/w ? When you bought a bike? I am curious because mine is in shipping and i am curious how fresh f/w i will have.
48V x 18A seems to give 864W in peak, so quite good.
Probably, because I have been planning more for the M600 for over a month now. When did you order your frame from Dengfu and where is it now? Melody told me that the shipment will take a maximum of 1.5 months to Poland, but I read here that some ordered a frame in January and received it in April
Try to contact the factory in Wrocław. I wrote to them and got a reply quickly. I asked if I can buy an engine from them. They replied that they would start production at the end of the year and only wholesale.
I have no Dengfu frame - i have ordered different bike with M500 - Eshion (great contact and very helpful manufacturer) with alu frame.
Eshion Sport E-bike Tda30l,250w/500w Mid Motor Electric Bike With Hidden Battery - Buy E-mtb,Fast Electric Bicycle,Electric Bike With Hidden Battery Product on Alibaba.com - M500 (for eu compliant) instead of M600.
@Seqlat Have you contact to Polish Bafang factory?
Eshion Sport E-bike Tda30l,250w/500w Mid Motor Electric Bike With Hidden Battery - Buy E-mtb,Fast Electric Bicycle,Electric Bike With Hidden Battery Product on Alibaba.com - M500 (for eu compliant) instead of M600.
@Seqlat Have you contact to Polish Bafang factory?
Tak/Yes
Could you share a contact or ask for latest m500 48V f/w?
EMTB Forums
Latest articles
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two... -
2025 M1 Sporttechnik EN 8.0 review
The M1 EN is one of four M1 models built on the same frame. Well, it’s...