Search results

You are right, my mistake

Then I missed something. I downloaded it two days ago, and used it with SM-PCE02 and after changing the angle the UPDATE COMMAND was grey and not active and the change was not transferred to the motor. Should I do anything special? My motor is at 4.8

Hi vadll STUNLOCKER Android and Windows to change the MOTOR ANGLE and it is not allowed. So looks like I need the full license , is that right or I am missing something?. As I am not planning to derestrict the bike, the full license is kind of overkill, so I will have to try my LBS to use Etube.

Yes. It is required to use adapters, if you pull some cable out of the frame you will see a thinner cable and an adapter that connects both cables.

But connectors are not compatible with EP8 cables and will require adapters

Thank you @Bearing Man, I have not bought any bearing yet. My motor is still performing fine but I feel curiosity and I keep asking questions :)

The large bearings in the axle are and it is recommended to change both: 6808 2RS (6808 is the reference for dimensions and 2RS means 2 sides rubber or plastic seal) 6805 ZZ (ZZ : 2 sides metal seal)

From Wiki: Electrolytic Corrosion (Electrolysis) occurs when dissimilar metals are in contact in the presence of. an electrolyte, such as water (moisture) containing very small amounts of acid. The dissimilar metals set. up a galvanic action which results in the deterioration of one of them. Hi...

There are older versions of eTube for tablet that show this battery diagnostic, but they do not work with the newer display SC-E7000 or SC-EM800, but probably the older SC-E8000 should work fine. They can be found here: https://androidappsapk.co/download/com.shimano.etubeprojectmobile.droid.tablet/

If you have an EP8 you need display SC-EP800, it has color and BT. This display and EP8 use the new cables EW-SD300 which are thinner than the old ones EW-SD50, and not compatible. There are adapters to convert from EW-SD300 to EW-SD50, they are the Shimano EW-AD305

It is a plastic cover, 15€

There is a "Crash Protection" for DI2 derailleur, it is named "RD" and may turn off your bike after a crash. You can see it in one of the display menus, I am attaching how to reset it.

If you have DI2 derailleur, there is a "Crash Protection", it is named "RD" and it may turn off your bike after a crash. You can see it in one of the display menus, I am attaching how to reset it.

I have not tried latest Etube version, because I read that the battery health measurement has been removed, as you can read here: https://www.emtbforums.com/community/threads/shimano-battery-life-poll.10780/page-14 And I also think that Shimano purposely removed this Battery Health number in...

You need Etube for Windows

Check for pinched DI2 cables in the frame, unplug the DI2 connectors from display and motor and clean plug and socket with compressed air and contact cleaner spray. Connect them in place using the Shimano tool TL-EW02 and make sure you hear the "CLICK" when it engages. In case of doubt...

New motors need to be configured with the same angle as original motor. If angle is not configured properly, torque sensor detects something is wrong and motor throws Error Code W012 (for E8000): W012 – Crank installed in incorrect direction or drive-unit setting angle

Etube for cell does not include this set up for the light, You need etube for windows which requires the connection box SM-PCE002, at +150€. But you can go to a store and they can do it for you, but the will probably charge you.

Remove motor left cover, where battery cable is. There is connection with two screws that supply 12V 1A for lights. But it has to be activated in SW using etube or Stunlocker

Yes , it is a pity that Shimano does not provide any spare part at all and want us to spend big bucks in a new motor. I know what my next ebike will NOT have: Neither Shimano motor nor Shimano battery