Search results

?

Added some more images.

Hi and thanks for the feedback. As the suspension compresses the fender moves away from the bottom bracket area, the fender could rub on the inside of the chain stay yoke, but only when mud hits it.

Hi all, been looking at ways to stop mud accumulating on the frame at the lower pivot point as well as stopping small stones getting into this area which were getting trapped and damaging the frame. I already have a muckynutz front fender so I purchased another muckynutz front fender, but this...

I had a look at this a while ago and the problem is with how the cells are connected together. You need to get 42V (I think from memory) output and if you split a Levo pack in half you may struggle to get this, and then you would need to connect any additional cells / packs in parallel in order...

I saw the carbon stick on guard and thought that won't last long when hit by a rock. When the lower part of the frame hits a rock the whole bike knows it, I don't think any protection will last long. Mine has some pretty big marks in that area.

Jerseys look great Rob, awesome idea.

I'm about 5'11" and ride a large frame. I have a dropper post which means the saddle is naturally quite high, but it is ok for me - just.

I am running 20 / 50 / 100 at the moment with 90% current, I think I might just put this back to 100% because the current limit apparently also effects ECO and Trail. What is the difference between Race and Eco on accel, is it motor run on after pedaling? I have also changed my tyres to Maxxis...

I have also had 2 motor covers break, the large one on the drive side broke due to the bike shop incorrectly refitting it after some warranty work (bosses broke), replaced free of charge, and the small upper one on the left hand side has just broke, looks like a manufacturing defect or the bike...

Hi I use a Muckynutz on the front and find it great, you have to go for the larger one due to the fat tyres

I sent an email to the developer asking about how the app works with Garmin heart rate monitors, Garmin remote and 820. He got back in touch really quickly saying the app only works with Bluetooth HR monitors, bit of a shame as I have a Garmin HR monitor and it is ANT+ ? I think I might pass on...

I use a Hope R4 light for local night trails, it's excellent and the battery lasts for ages.

? I reduced the teeth on the front chain ring as I wanted to climb single tracks without using the motor loads

It could be a wide range of problems, something simple like the sensor on the rear, harness issue or you may need a new motor or battery. When mine packed up and would not go again, it turned out it needed a new motor due to water getting in through a dodgy harness. Lets hope it is something simple

Believe it or not, a simple turn it off and on again might get it going again

165mm cranks!!! That is on the list for potential upgrades, did not realise the 2018 bike had gone down that route.

For info I now run 2.8 Maxxis roller tyres and get pedal strikes all the time. Did not like the Purgatory tyres, too much movement on the side walls.

Out of interest how can pedal strikes be any different? The Purgatory 3.0 tyres I would have thought are taller than the 2.8s.

Was there some resistance and gear noise when you turned it over?