Yes the standard are 20mm rise. I've fitted similar bars with 20mm rise but a little more sweep, cut down to 760mm. Very comfy with the increased up/back sweep.
I fitted the carbon bars not long after i got the bike and they were a nice improvement, trail chatter is minimised. What was really...
You will need to adjust the top mount downwards. Remove the plastic cover via the two small screws, loosen the two screws which mount the latch mechanism to the frame and slide down a little, refit cover and test. It wants to be very firm as it clicks in. If you adjust it until it's too low and...
Loosen the two pinch bolts first - these are what retain the crank, not the plastic screw, they also cause the threads of the crank to squeeze down on the plastic screw. Once loosen, wriggle the crank a little and you can use your fingers on the knurling of the plastic "pre-load" screw to loosen...
A good starting point would be to set your sag front and rear to roughly 30%. Ride your usual trails and monitor the position of travel o-ring on the fork and shock to see how much travel you're using as you ride. Ideally you want to be using 80% travel under normal circumstances and closer to...
SRAM now recommend to use Dynamic Seal Grease on the air spring internals as well as the wiper seals. Must now add 0.5ml/3ml of 0w30 oil to the air spring assembly as well as the the 10ml to each lower leg.
I was hoping it would be about right as i had read someone recommend a 700mm cable on a di2 conversation post. I will take a closer look. I am not sure how the length/routing would compare on my merida vs the canyon
I was thinking about doing the same. I've got a spare 750mm di2 cable so all i need is a mech and a RHS shifter/switch. How do you find the E7000 shifter out on the trail?
Feedback on the Rockguardz 2019 anyone?
How does it mount at the back/under the motor - can it easily be removed for cleaning? Is it secure?
Does it dig into the paint at all and scuff it off over time?
SQlab 60X here. Love this saddle, very comfortable. Great warranty too - had a small issue with it and sent a message to the supplier Sunday night, before even returning for assessment, no hassle, yesterday a warranty replacement arrived to my door.
Grab a piece of cardboard and measure your...
Deathgrips
Racing Bros low friction fork seals
New dropper cable
Miranda 160mm cranks
Lyrik's fresh after a service and dropper lever is smooth like butter with a new cable. Grips on to replace the Ergon's i wrecked and cranks I'm waiting to arrive...
Waiting patiently for ride Saturday morning
Congrats on the new bike, good choice! I am on the south side of Brisbane and regular for Daisy, Bayview etc.
Ebikes are great, even more fun on a group ride :)