Search results

Here's the link to the Endless Sphere thread @agro_86. https://endless-sphere.com/forums/viewtopic.php?p=1605847#p1605854 Being honest, I'd personally stick with the Besst tool and getting an account with Bafang. But I can liaise with those who have used this method, to see what their...

Apologies for the delay @agro_86. In order to set the wheel size (or change wheel size & circumstance) on CANBus protocol motors, the besst tool is required. I have seen examples of those who have set wheel size and top speed without the besst tool through a hack (I think a thread on Endless...

@Mabman is correct. Progress by myself and fellow fanatic bafang users Is slow. To put context to our perdicament, I'll share some images which highlights differences between the UART M620 & CANBus M620

Apologies for the delay @agro_86. The full video regarding the DZ41 display will drop tomorrow. I opted to test the CANBus version, as most new models of motors from Bafang are using CANBus protocol. As such, the display has been installed on my E10v1. My E22 is running the UART protocol which...

Anywho, changing the subject slightly 😅 This is what my suspension chap has provided me via WhatsApp after having my E22 for a week and a bit. Please note, Dengfu have not provided me this. Rather this leverage curve rate has been provided by a third party suspension experts. I have sent an...

Good point 👍🏿

NX derailleurs (I'm assuming it came with NX in accordance with what Carbon Cycles advertised), might be the culprit behind the chain tension. If you can, I would look into swapping to GX derailleur only (no need to buy a shifter). If it helps...

Their is no right or wrong approach to gearing preferences when it comes to ebike motors. I somewhat understand your point @bram.biesiekierski. However, you've not taken two important aspects into consideration:- 1. Subject to the level of assist you're in, will depend on how much power the...

You've raised a good point @bram.biesiekierski. Technically, I'm not running my M620 with 160nm of torque. So with the Christini chainring and a 32t, I'm able to get away with a power delivery which isn't destructive on the chain/cassette/chainring/jockey wheels etc. My friends have asked...

Excellent 👍🏿 You have the UART protocol M620 motor. This means you can freely program the motor at your leisure. A programming cable is all you need (along with a laptop/desktop/android phone or tablet). For now, I won't bore you with the nerdy stuff of programming the bike. Best advice, ride...

Your the first person I've seen to have brought an entire E22 build from Carbon Cycle @Old Biker. I'd be grateful if you could share your experiences concerning how the bike arrived, how protected and packaged the bike was and what you had to do to fully assemble it 👍🏿

Well, it's a smaller unit than the 500C display but with a bigger screen. I'm just thankful I can finally run a display further outboard on my 820mm wide bars without issue. Both displays seem to be equal in terms of protrusion. And the DZ41 does seem more ergonomic 👍🏿

Just in case, here is the instructions for the DZ41 display 👍🏿

I would appreciate it if this post could be shared to the relevant Dengfu E10/Cheeb threads on the forum. Nevertheless, This is the DZ41 display. A display which CANBus protocol bafang emtb riders have been waiting for. Power button is located on the bottom of the display. The display uses a...

Figured I'd spread the word regarding the Bafang DZ41 display. Hopefully, this answers questions about the dimensions. Early reports suggests that these displays (depending on the connector), compatible with all bafang motors (old and new). I'll keep you posted further concerning the...

The second one 😅. The can makes it difficult to determine how much you are pouring into the tyre (you have to guage it by feel if you freestyle it. Alternatively by using the cap/lid, 6 caps is roughly the equivalent to 125ml.

Product Image: Product name: Halfords 500ml Tubeless Sealant Price paid: £12 Score (out of 10): 10 Review: What can I say, its tubeless sealant that does the job. I've been using this sealant for the last couple of months after discovering it after a random Google search 'tubeless...

So, I've received a ton of messages through Insta, Facebook etc over the last couple of days. Stating that the Dengfu E22 & E10 are becoming more difficult to purchase due to availability. And in some circumstances, are now showing as "out of stock". I have messaged Carbon Cycle who confirm...

Doesn't it depend on which battery option you go for as well?

Appreciate the feedback @RipGroove. I ended up going the MT7 route on a emtb build a while back. No complaints as to the performance. Nowadays, I'm using different brands of brakes (4pot) but on the cheaper side. So far, I haven't had issues with the calipers after using sintered pads...