Search results

Yeah, I noticed that. The good news is that it is quieter now after playing with the programming and changing the grease inside. But I wont shy away from the fact that you can hear the motor when it initiates.

Not sure if anyone will find this useful for the 1st generation E10 frames but Superstar Components Slackerizer fits into the headtube of the XL. No fiddling around with either the headtube or headset was required. Allowing me to retain a seat tube angle whereby keeping my default riding...

@veryoldfart, dude you're exactly the kind of rider who I hang out with ordinarily. Someone who's older than myself. With a perspective which makes me appreciate how far mtb'ing in its entirety has come. Hell, the very fact that your on the forum suggests that your open minded and embrace the...

So in accordance with everyone's wishes, I have given the Dengfu E10v1 the same preferential treatment. Just like the E22. Many thanks to Superstar Components for their 2°angle headset. Enquiries through the Dengfu E10 threads revealed that the Works Components headset does not fit with these...

I'm running a Sram 12 speed GX chain with 126 links with a 12 speed Shimano SLX M7100 derailleur but with a shimano SLX 11 speed shifter M7000 and an 11 speed sunrace 11-50 cassette. A bit of a bodge but works just as well. Although, I'm not running the stock M620 130bcd chainring/spider...

I do appreciate your kind words about the spec choice on the E22 @Ghost_. Truth be told, the build simply used spare components I had lying around. The Dpx2 came off my Status 160 which is now running a Fox x2. As it stands, my E22 seems balanced due to the Fox 36 fork along with the revised...

Hi @Ghost_, many thanks for your kind words. I have been asked by some about mulleting the E22. From what I've noticed, the E22's BB height is lower than the E10 when ran with a 27.5 rear wheel. Whilst this may seem odd considering that both frames use the same rear ends, I am reminded...

E10 -V- E22 Initial impressions So I have been asked by a lot of people to do this comparison. Whilst each person who has pm'd me on Instagram, EBR, Facebook and this forum have asked for specific details between the two along with 'which is better?'. It is my intention to provide the...

I had to refamiliar myself to the US ebike classification so please bare in mind, this is how I'm interpreting it. Class 1 is capped to 20mph and 'if' a throttle is installed, it can only work when pedaling or exceeding a speed greater than what walk assist would offer but capped to 20mph or...

We will. I guarantee it 😉

You've made your point. And rather than for me to 'defend' my rationale behind building up the E22 frameset, I'll simply say "To each is own!!". As for your choice of wording 'moving forward', I'm reminded that some (if not many) ebike owners are reluctant to crack open a motor and perform...

Hmmm!! Food for thought. Although one does ask the question, why not wait for a well known third party developer to build the display? Eggrider comes to mind as they've pretty much covered alot of non-mainstream ebike motor brands.

Fair enough. I'm speaking with someone also in an effort to adapt the communication protocol from CANBus to something else (maybe UART or something along those lines). My enquiries has revealed that all signs point to the controller (or swapping it out). My issue is that I'd rather not run an...

I see. So your intending on using the stock controller but adapt the connectors. Its plausible that this could work. Keep us posted @captainhightop 👍🏿

Inventive!!!👊🏿 Not a bad solution for a touring set up. I have been successful in placing the stock battery in a evoc ebike dedicated backpack. But I'm aware that some people find carrying a spare battery in a backpack troublesome. Between me and you @Mabman, I'm still holding out hope that...

No church for the wild🤙🏿

The M620 uses isis cranks (similar to Bosch Gen 2 & 4, Yamaha and Brose). The Q-factor varies from motor to motor when different cranks are used.

My 52v battery should be arriving sometime next week @Mabman. It'll be interesting to see the difference for this frame/bike. Similarly enough, I know some of you have asked me to do a comparison between the E10 and E22. I'll try to be as detailed as possible but let me know (anyone and...

Stick to what-ya-know!!! Gotta love Raceface Aeffect cranks on the M620. Reduced Q-factor and shorter than the stock M620 cranks.

Ok, gottya. Typically, all hub motors attach using dropouts on either a frame or fork. This means that any frame which uses a 9mm quick release skewer axle would be your best bet. Same thing with forks but..... I have my options concerning front hub motors on suspension forks which use the...