Search results

  1. P

    M820 Bafang - LIGHTCARBON LCE930 Frame (lightweight)

    return from somebody who have tried needed. I find that chain is very close to the speeder, i doubt that it fit with 2 teeth less. but may be with few adaptation ?. the other problem is chain position in regards of swing arms, with the E10 i needed to install protection to avoid that chain eat...
  2. P

    M820 Bafang - LIGHTCARBON LCE930 Frame (lightweight)

    32 and 11/52 with 29", 11/50 with 27.5. I would used less if i could, 28 and reduced K7 rear (less cheaper and more light) , but with 104BCD spider it's impossible to mount less than 32
  3. P

    Bafang m820

    Ok. clear. Your motor is not provided with spider (first time i see that ?). You can find a lot in ali (same than M510). But, as i haven"t purchased i can't recomand one in particular, i'm not sure that all keep the same width for chain line. ask to dealers if they have original width. Or ask to...
  4. P

    Bafang m820

    ? all of 32 teeths in 104 BCD on the market fit. What do you search exactly to don't found that ?
  5. P

    E82 Dengfu frame now available

    i disagree with you. With battery it have too lower space on ebike to allow easily cables/wiring translation, sometime when you fall with MTB the handlebar can make 360° and done too many constraint on cables.
  6. P

    SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

    overheating => bad contact (may be where cable weld ?) . may be better to change connectors. investigate if correct continuity on cables
  7. P

    SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

    depend of use, i just need lower guard to protect motor from front wheel stone projections, no more. i will never use it to point of support to pass an obstacle
  8. P

    SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

    without the rear shock, you measure shock fixation axles center distance with suspension fully open and fully closed (limited by swing arm/basis articulation construction). in this thread, you can see how i had measured for the E10 frame : Dengfu E10 Suspension/Wheel Options
  9. P

    SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

    great. please can you mesure the max shoks length ans travel available with this link. thanks
  10. P

    Bafang m820

    lot off parameters can be adjust (with BESST tool) on the M820 to personalize motor functioning
  11. P

    quality battery supplier to recommend ?

    I have purchased my 500 W battery for my CEF50/M820 to "battery supplier store" https://fr.aliexpress.com/store/910771002?spm=a2g0o.order_list.order_list_main.143.21ef5e5bXRpIUX I have allready purchase one to they in the past and i was satisfied. But not with this last 48V9.6Ah. It doesn't...
  12. P

    SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

    Yes, i have waited 48V10A carbone long time. But as it was not available, i had finally doing myself my little battery. Those i can said is with 48V 15Ah aluminium casing, my bike weight is 21 kg and i never use more than 30% (+-1400 D+ max done). with 48V 9.6 Ah my bike weight is 19.4 kg. i...
  13. P

    SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

    CEF50 and M820 provide a very good bike. But I don't think that is a good idea to purchase it if you don't "love" develop, personalize and put hand inside the mechanic. Mostly today with big brands overstock.
  14. P

    One day epic in the Pyrenees

    too late ? aspe valley, beaudean, loudenvielle on french side biescas, ainsa, castejon de sos on spain side For those with several enduro tracks on same place and many many other place, see on wikiloc, trailforks and https://www.vtt64.com/tracks/ ITINÉRAIRES - ESPACIO BTT - PIRINEO ALTO...
  15. P

    SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

    exemple (it's the same on all axles). it's broken when i have tried to tighten the swing arm axel to recommended torque (12 nM)
  16. P

    SZZS specific CEF50-main thread (initial builds and troubleshooting related only)

    does somebody know where we can purchase suspension axle washers (i have broken those of swigarm) ?
  17. P

    Bafang M820 Firmware thread

    I have tested yesterday 4813. I don't remember who have shared it, but i said THANK YOU 👏. This firmware is more powerfull than my previous 4812 (and it consume a few more, normal). with speed mode setted at 80% i climb all i need more easly and whitout any power variations (upper mode not...
  18. P

    Bike Storage Rack

    off course. DIY, alike my bikes
  19. P

    Bike Storage Rack

    my space optimization 🤔
  20. P

    Discounted Bike and parts Thread - cheap(er) ebikes & stuff

    I write to follow and my contribution. Mondraker Frame But those will been helpful is to open 3 different thread: US, EU and UK, because shipping costs / custom taxes between this 3 location increase a lot the final costs
Top