Take care. An new revision (2.0.8) download automatically if you accept. this revision don't work with my M820 :cry:
Finally today after riding this software function and i can adjust the parameters 👍
Tested yesterday. Clearly if you usually don't use the max power of M510, the M820 as a good choice. A little bit more noisly but very playfull use.
Those has been surprise me the most is the consumtion, near 2 x less than M510. clearly if you don't empty the 700W battery (keep 20 / 30 %), you...
skid plate quickly builded, those delivered with the bike has broken as soon as i touched it. Somebody have received the new rev more solid from SZZS ?
Yes received. not tested for the moment (snow at up and mud at down). I just need to finish build skid plate, this received need to be thrown in the trash. those i can said (for my opinion).
- Very good: packaging, quality of paint and carbon build showing, quality control (delivered with...
you can instal (104 BCD) 🤣 but oval plate will not functioning on Ebike (all). you have an freewheel in the motor, the crank arms changing position in regards of the plate
Not tested for the moment, butThat i constat with my XL with 150 fork and 2x 29", i have 63.5 for fork angle, 1305 wheelbase. those value are extrem for me and i can not doing what i wanted, with more front travel and 27.5 rear. Because that will reduced fork angle and increase wheelbase.
The...
i have request holes to SZZS, i have communicate the dimensions and showed those used on my LCES1075. They have sent the frame with the exact items to pass the cables. I appreciate a lot their reactivity and effiency.
For me the most important problem is the constraints on cables,. Exemple, you fall down and handelbar turn at 180°. Headset cable routing is good on road bicycle, who never turn more than 90°, but not for E-MTB, where battery leaving lower space for cables movement
For those who don't want wiring through pivot. We are lucky that SZZS accept to personalize and perform holes on frame to pass the cables (i recommand), but the frame is delivered with original pivot assembly. To have clean finish i have found this ACROS set to replace upper ZS56, but it have an...
One remark about the lack of link between each rear arms wire. This point bothered me before purchase, i was wooried that that bearings fails quickely under the constraits. But after dismantle, i constat that each articulations have 2 bearings side to side, visibly to stiffen and manage the...