Search results

Welcome, NJR, aka "Tahoe Shredder"! Beautiful scenery and great riding in your neighborhood! Now that it's covered with snow you must be wishing for summer again. These pics from our June trip have me longing to return: view from Sawtooth Road toward Squaw Valley Summit Lake off the Donner...

I find these to be very nice, especially if your LBS gives you a good price on them... S-Works DH Carbon Handlebars | Specialized.com 38mm (1.5") rise, 6-degree upsweep, 8-degree backsweep

Welcome aboard, Lew! You can now change your handle to UWIN! ;) You might add your location to the EMTB Members Map: EMTB Members Map - Google My Maps Looking forward to seeing the ride report you mentioned on the SoCal board.

Fantastic, Paolo! (y) (that's supposed to be a "two thumbs up" emoji) Coming soon for iOS, I hope!

could be the glide plate motor protection (white in the lower pic)

Welcome, Nick! Some beautiful country near you on the Central Coast, so you should have lots of fun riding. Here’s a shot looking down Rattlesnake Canyon into La Brea Canyon just north of you.

Intrepid Trail, Dead Horse Point State Park, Utah

Cockscomb, Cottonwood Canyon, Utah

Hidden Canyon Overlook, Canyonlands, Utah

Thanks for posting this, Al. Tires do vary in aspect ratio, and it's good to know that the 29x2.6 Butchers are lower profile than some.

Topham - you should be good to go. This is from post #790: (Unlock speed) Is it possible to change the wheel size on the Levo 2019? TCU version 2.019 or V1.7.0 = wheel size and speed limit are changeable TCU version 2.025 = wheel size and speed limit are NOT changeable.

Yes, as mentioned in the first line, for Apple iPhone (post #818 above)

jmb22 - Make sure the wheel/tire combo you plan to run will fit in your bike. I also have a 2018 Levo (Comp Carbon) and a 29x2.6 Rekon tire mounted on a 29"x30mm inner width rim will not fit in the back. This 29er wheel/tire combo is too tall for the chainstay length. The radius of this...

I'm running battery firmware 2.22.3 on my 2108 Levo, and the version of BLEvo iOS downloaded last week works fine. Love the App and tuning options! Paolo - a couple of suggestions for changing the Display options. 1. Can you make it an option to get rid of the speed and cadence meters and...

Thanks for the tip, will do. I had not seen the Smart Power Option in the pull-down window choices, but have now found how to access it and an explanation of how it works in the pdf manual in Section 6, p .7-8. I'll give it a try. Question: Would it be possible to have the Speed and Cadence...

WOW - just returned from my first ride using the BLEvo app! This may be old news to BLEvo vets, but it was an eye opener to this late adopter. I’ve had a 2018 Comp Carbon for 11 months and 2200km, motor 1.3, firmware 5.0.0, battery firmware 2.22.3. I’ve used Mission Control exclusively...

Rare earth magnets (30 MGOe to 55 MGOe) are plenty strong enough to stay on a steel rotor even without epoxy support. I bought several types and sizes (they're inexpensive and fun to have!) and settled on the 10mm x 3mm Nd42 (shown in the pic). No need to move the sensor. A Google search should...

I used a strong neodymium magnet with no adhesive for several months, and it held tight (did carry a spare just in case). Recently added some JB Weld epoxy around it, not between the magnet and rotor, to make sure it didn't shift or get knocked off if something along the trail happened to hit...

work-around with Shimano SM-RTAD05 Disc Rotor Adaptor

Yikes, you're lucky the only damage was to the bike and not to you! :eek: Did you remount and tighten the wheel after the sensor and cable replacement, or did a shop? If it was a shop then they should be responsible for any repairs. It's possible to leave it too loose if you just snug it to...