What did you do to your EBike this week?

[steve_sordy]

......................
Really frustrating that when you line the valve up on one side to be in the middle, on the other side its #wonky

.............

WTB is the same, Maxxis not so much.

 

[steve_sordy]

This week was Fatbar Lites.

More than twice the rise, half the weight of the stock bars (not I care much on a Rail ) and £75

First test ride out this morning, much better on the posture

View attachment 150457

Without the fold in the bar and the little hole under the grip to allow the cable to be hidden, what did you do to route the cable? I know it has to go outside the bar, but did you just ziptie it or use something else?

 

[Renton_Yorkshire]

Had a look i could possibly get them as a Xmas present. Not sure about what sweep and rise though

My stock ones were 15mm rise, and chose to get 40mm, so effectively an inch higher in old miney.

They are 760mm long as opposed to the 780mm of stock, but I'm not missing the cm either side.

 

[Binhill1]

My stock ones were 15mm rise, and chose to get 40mm, so effectively an inch higher in old miney.

They are 760mm long as opposed to the 780mm of stock, but I'm not missing the cm either side.

Yes that would do cheers

 

[Binhill1]

My stock ones were 15mm rise, and chose to get 40mm, so effectively an inch higher in old miney.

They are 760mm long as opposed to the 780mm of stock, but I'm not missing the cm either side.

I went for the fatbar V2 in black as I fancied the 40 mm rise 800mm wide. All out in the lite but at 50 gramms heavier that's not as heavy as my sandwich. Cheers £69 freepost as weel

 

[Ponzy]

Mulleted my Whyte e160, and shaved just under 900 grams off the rear end even with a burlier tyre. Just got to order the shape it link now.

 

[BikeBert]

Was bored, so I disassembled and cleaned the derailleur for fun

 

[Binhill1]

Was bored, so I disassembled and cleaned the derailleur for fun

View attachment 150668

Well done. I took vacuum to pieces today as cable was cutting out . It's in the garbage now £130 for new one

 

[Tyjay]

New fork decals arrived
Removed and fitted in about 10-15 mins

When I did my fox forks last year took about 90 mins due to decals being welded on and coming off in tiny tiny pieces was sick of my life that day