I couldn't see anyway to stop my ghost shifts in the 11t with the microshift. The replacement deraillier did the same.
I should have just bought a Shimano 11 speed M5100 and swapped it over. I was concerned that I might still have other issues though (probably irrationally) so I bought the linkglide/cues set listed earlier in the thread by @CarolinaCrawler . For some reason you only seem to be able to buy the OEM set like that from China. (cassette/shifter/derailleur/chain).
I tried just changing the derailleur first. For some reason I thought it was the same ratio to the Microshift but I couldn't get it to shift nicely.
So I changed the shifter next .. same problem, so changed the cassette (CS-LG400-10). The Cassette spacing from linkglide/cues is definitely different to the Microshift.
That almost all came off and went in the bin as it wouldn't index properly. Eventually found that if you ignored Shimano's instructions and wound the b screw out as much as possible - you could get nice shifting ! So maybe, I'd have got this in the first place, who knows.
No more ghost shifts and the whole thing shifts nicely. In fairness, pretty similarly to the microshift and I prefer the microshift shifter. The cues one just feels a bit clunky. The u6000 derailleur is absolutely horrible in construction terms. There's so much flex in it round the clutch area. For reference the Deore Linkglide M5130 also fits. It's only rated at 43t but works upto 48t. This is far nicer and generally available for about €30 !
With the Shimano Linkglide G500 chain it felt and sounded tight/binding on the chainring and in the 11t. Also snapped my quicklink tool removing it. Swapped to a SRAM 11s chain and it's super smooth.
I should have just bought a Shimano 11 speed M5100 and swapped it over. I was concerned that I might still have other issues though (probably irrationally) so I bought the linkglide/cues set listed earlier in the thread by @CarolinaCrawler . For some reason you only seem to be able to buy the OEM set like that from China. (cassette/shifter/derailleur/chain).
I tried just changing the derailleur first. For some reason I thought it was the same ratio to the Microshift but I couldn't get it to shift nicely.
So I changed the shifter next .. same problem, so changed the cassette (CS-LG400-10). The Cassette spacing from linkglide/cues is definitely different to the Microshift.
That almost all came off and went in the bin as it wouldn't index properly. Eventually found that if you ignored Shimano's instructions and wound the b screw out as much as possible - you could get nice shifting ! So maybe, I'd have got this in the first place, who knows.
No more ghost shifts and the whole thing shifts nicely. In fairness, pretty similarly to the microshift and I prefer the microshift shifter. The cues one just feels a bit clunky. The u6000 derailleur is absolutely horrible in construction terms. There's so much flex in it round the clutch area. For reference the Deore Linkglide M5130 also fits. It's only rated at 43t but works upto 48t. This is far nicer and generally available for about €30 !
With the Shimano Linkglide G500 chain it felt and sounded tight/binding on the chainring and in the 11t. Also snapped my quicklink tool removing it. Swapped to a SRAM 11s chain and it's super smooth.