do you think the trunnion coil version will fit?I wanted to fit a Super Deluxe, so I made this yoke to lenghten 205 trunnion to 230. Works good.
View attachment 43157
View attachment 43158
Trunnion will fit ,do you think the trunnion coil version will fit?
if put in vivid coil the spring will fi in between the rockers since the shock's body will move up by 25mm?I've shamelessly nicked this idea and come up with a MK2 version that bolts straight onto the lower trunnion mount.... View attachment 51411
The collar and spring will move up there is enough spce in between the rocker?Trunnion will fit ,
Some rails have trunnion some don't they all use the same rockers thou so there interchangeable with the correct fitting kit
on the mounting kit dont use the plastic bushing you need to put the du bushingPutting all the info I found in one post.
Trek rail 9.8 2021 Large Came stock with trunion rockshox shock which started leaking in a week.
Installed fox dhx2 230x65. Cannot run in low setting seat post hits. Reservoir clears in both settings.
bolts are 1mm shorter than shock + spacers
Fox mounting hardware. Upper shock bolt is 54mm shock width + 2x8mm spacer plus linkage = 70mm but 69mm bolt
Bolts
TR540755
TR599900
hardware
• Upper: 10mm x 54mm 803-03-311
• Lower: 10mm x 40mm 803-03-329
View attachment 66994
View attachment 66995
View attachment 66996
View attachment 66997
View attachment 66998
View attachment 66999
Is your shock trunnion or eye-to-eye?I have asked two retailers for the coil Öhlins shock what to order but does not get a clear answer. One of the reatailers claim that a 65 can be shimmed to 57,5. Maybe one of you can help.
If I order a 65 stroke. Can I shim it down to 57,5 (or 60 if I feel brave)?
How do I do that?
Big thanks!
Eye to eye. Ok, thanks! Did you get the shims in the box?Is your shock trunnion or eye-to-eye?
If eye-to-eye the shims (spacers) are 2.5mm so you can shim the 65 shock down to 62.5, 60.0, and 57.5. Is what I have on my 2022 Trek Rail 5.
Bought from TF Tuned - came from them with the 3 shims pre-installed so the shock was standard 57.5mm.Eye to eye. Ok, thanks! Did you get the shims in the box?
i cut the blue spacer i wrap the stanchion of the shock to make it sure the saw will not touch i cut it both opposite side and if ech side have few MM left i snap itI removed the air can on my superdeluxe to check what (if any) tokens were installed. As it turns out there's a blue spacer underneath the bump stop which is clearly used to limit travel. I've no doubt this could be easily cut off and thus give full stroke. Normally i cross reference the parts catalogue in these situations to make sure things like air cans - damper body's etc are indeed the same. I wasn't brave enough to cut it off just in case something collides internally or there isn't enough clearance in the seat stay bridge at bottom out. To replace the spacer is a FULL strip down job, with all the special tools involved, the main piston is quite an intricate thing!
I was in a bit of a rush to go out riding, so didn't measure the spacer, but 5mm seems about right. Who's going to do it first ?
No volume tokens BTW...
Thanks! You are being more informative than the two retailers I have tried to get this info out of.Bought from TF Tuned - came from them with the 3 shims pre-installed so the shock was standard 57.5mm.
Edit: but have since tried 60mm and 62.5mm but have stayed with 57.5mm which works nicely with the forks (Lyrik Ultimate MY23). Am 5'10/75kg with a 525lb spring. Tried a 500lb spring which felt too soft, the 525lb felt better for where I mostly ride (South Downs) so stayed with it.
Thats good info, thanks!@HeyHey If you do get an Ohlins coil then rotate the damper shaft to move the Rebound knob to the rear (as below).
Trek rail rear shock upgrade ideas please
Have January 2022 Trek Rail 5 Large, also weigh about 80kg kitted up with Ohlins TTX22m.2 coil shock and Rockshox Lyrik Ultimate MY23 forks with Trutune eBike insert (no spacers). Shock from TF Tuned came with the 525lb spring recommended by them. Have also tried a 500lb spring but prefer the...www.emtbforums.com
Yes that was the idea, then I could use any 205 x 57.5 trunnion shock I liked - as long as the piggy back clears the frame.if put in vivid coil the spring will fi in between the rockers since the shock's body will move up by 25mm?
View attachment 148056
This thread has 22 pages have a browse first2022 Trek rail 9.8 xl - Wanting to upgrade my shock. Would like to go to coil. Has anyone made this upgrade ?
Just trying to get the most out of my rig. Current shock has about 2k miles on it.
Hi, does anybody know if Rockshox Vivid Ultimate Air 230x62,5 will fit to Rail 5 gen.2 (625Wh 2021) Large size aluminium frame? I know that 230x60 fits but have no clue if 62,5 will be fine as well. Thanks
Rockshox Vivid Ultimate Air 230x65mm?I ran my 2002 Rail5 (alloy)for over 1000miles in bikepark trails with 65mm travel damper and there was no problems
also, I didn't die
Rich.
might work?Rockshox Vivid Ultimate Air 230x65mm?
The World's largest electric mountain bike community.