Thanks for clarification..
I think that for trail for "Kenevo" it is better the Lixada Gub holder.. not so beautiful like quadlock but stronger..
The Official BLEvo Thread
- Thread starter Rob Rides EMTB
- Start date
- Status
I think that for trail for "Kenevo" it is better the Lixada Gub holder.. not so beautiful like quadlock but stronger..
Ios or Android? I think iOS..
Both which phones people use and equally, which mounts, are both fairly intrinsic (unless you just use it for stats or have the voice information on and stash your phone in your pocket) for a large part of Blevo's functionality, so are relevant to the thread. Paolo has made several posts in the thread about different phones and mounts.
Mesut
Member
I run Blevo on my main (only) phone, a Oneplus 6T using this bag mount. It works really nicely for me and avoids the judder that I get with rigid handlebar mounts. Plus I can carry some tools, glasses, snack bar, etc as well.
Hi there!
One question about the Apple Watch Integration to use Smart HR:
I tried it today and the readout said I had a flat pulse curve of 67bpm - so definitely correct ^^
How often does Blevo check the Apple Watch HR?
Just food for thought: When I use Zwift the Zwift Apple Watch App gets started automatically to get a good HR reading - is something like this maybe planned too?
Thank you
One question about the Apple Watch Integration to use Smart HR:
I tried it today and the readout said I had a flat pulse curve of 67bpm - so definitely correct ^^
How often does Blevo check the Apple Watch HR?
Just food for thought: When I use Zwift the Zwift Apple Watch App gets started automatically to get a good HR reading - is something like this maybe planned too?
Thank you
ca/nv/utemtbiker
New Member
just started having problems with blevo. I just upgraded to v3.6.6. I am losing connection to bike and motor during my ride. Sometimes I only lose connection to bike power, motor power and riding level. everything else is working. Today for the first time my screen went blank. I am using a blackview 5500pro with android. Up until this last upgrade. I had no problems with blevo. Any suggestion?
Thanks
Thanks
KRELLevo
Member
You can unscrew the control/power-Panel. There you find the ANT+ Code!
Otherwise you can find the code in the original vehicle documents!
If you lose connection with the bike try to update the firmware of the TCU. During the ride switch off and switch the TCU.. without touching BLEvo.. BLEvo will reconnect automatically.. It happened 2 times last week.. very strange.. The TCU Bluetooth connection is not so strong..
@Stumpy could you help him?Hi there!
One question about the Apple Watch Integration to use Smart HR:
I tried it today and the readout said I had a flat pulse curve of 67bpm - so definitely correct ^^
How often does Blevo check the Apple Watch HR?
Just food for thought: When I use Zwift the Zwift Apple Watch App gets started automatically to get a good HR reading - is something like this maybe planned too?
Thank you
ca/nv/utemtbiker
New Member
The answer is in the user manual.
"You may be presented to enter a passcode on first connection to the bike. This can be found on a yellow sticker in your manual or written on the back of the TCU module. For older bikes it may be 0000."
The TCU code is under the TCU and it is 6 digits code.. The proposal from Android or iOS about 0000 code is wrong. The older bikes should not be paired with the phone.. only with BLEvo and/or Mission Control..
Voice messages.
If you have a Samsung phone, please try to install the text to speech from Google and disable the Samsung one..
https://play.google.com/store/apps/details?id=com.google.android.tts&hl=en_US
It is better..
If you have a Samsung phone, please try to install the text to speech from Google and disable the Samsung one..
https://play.google.com/store/apps/details?id=com.google.android.tts&hl=en_US
It is better..
That worked. Thanks.
Same issue. If I toggle authorization on/off then the current ride will load but requires that I do this each ride now.
beutelfuchs
Active member
Hi @PaoloBLEvo
I can´t seem to get the smart power feature to work correctly.
What I want is to use e.g. 180 watts of my own all the time, the motor shall do the rest.
For that I use the settings shown below.
But what happens all the time is that the motor works way too much. Often I end up doing e.g. only 120 watts for a long time without the motor power tuning down.
BT connection to the phone is good, at least I can see my power and other status updates all the time.
Bike is a Kenevo 2020.
Do you have any idea what I could do wrong?
I can´t seem to get the smart power feature to work correctly.
What I want is to use e.g. 180 watts of my own all the time, the motor shall do the rest.
For that I use the settings shown below.
But what happens all the time is that the motor works way too much. Often I end up doing e.g. only 120 watts for a long time without the motor power tuning down.
BT connection to the phone is good, at least I can see my power and other status updates all the time.
Bike is a Kenevo 2020.
Do you have any idea what I could do wrong?
Baba
Member
Hi Paolo, really cools stuff. Do you say above that your app doesn't capture the heart rate from apple watch? So some other heart rate monitor must be used? Thanks!
Which tcu version you have?
Same issue with Mission Control?
With iPhone you can use the heart rate recorded by it.. just start an activity on the phone and configure it on BLEvo
MC connects normally
Last edited:
- Status
Similar threads
EMTB Forums
Latest articles
-
A new standard for charging ebikes is coming? A quick interview with Bosch - charge2bike
I had a quick chat with dr Vikram Godbole about "charge2bike", a new... -
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two...