jim0905
Active member
I'll assume you're using profile 1 looking at the travel range figure?
Orbea Rise , anyone seen one yet ?
- Thread starter Steve G H
- Start date
I'll assume you're using profile 1 looking at the travel range figure?
No that’s in profile 2, however I have noticed that it’s very dependent on what you are doing when it updates (when battery drops 1%) as if you are cruising on a flat at above 16mph it reports that you have a bigger range than if you are cranking up a hill.
As std profile 2 is more powerful, but as you say, you can have any three settings to choose from without having to switch profiles with your phone.
- Thread starter
- #515
It's great if you have a regular route or distance , I've basically upped eco setting a touch in profile 2 and find I can do the majority of the route in eco and get back with just around 30 % battery left over a 35 mile route , which gives me the option of a bit of boost if I get tired towards the end . Ok it's hardly a challenging route , dictated by lockdown, but I keep my heart rate up so I'm getting a workout . I've found eco is stronger than you think , riding into head wind in eco basically cancels out the wind , which would often stop me going out , I'd rather ride up hill than battle into wind . Cadence I've found is the key to this motor , keep it spinning and you really feel the benefit from it .
Such a versatile motor , you can just set it for how your feeling within the app .
Such a versatile motor , you can just set it for how your feeling within the app .
Two rides in on my Large M10 now and I'm extremely happy with it. Couple of minor upgrades (210mm OneUp dropper, DHR2 rear tyre, Shorty front, RRP Proguard, Specialized Power Arc saddle, XT ice tech rotors 203 front & 180 rear). First ride was 4000ft+ of steep up/down loam with a bunch of Levos and Rails, it kept up ok in profile 2 trail with some boost on steep climbs and the battery held out. Finished the ride with not a huge amount less than the full fats but did have to put a little more work in. Today I went out for a solo lunch hour blast in boost the whole time and still had 3 of 5 bars battery when I finished.
What I like is that it handles almost identically to my old bike - easy to move around from line to line, jumps off anything and just generally a huge laugh to muck about on - loads of fun!!
What I like is that it handles almost identically to my old bike - easy to move around from line to line, jumps off anything and just generally a huge laugh to muck about on - loads of fun!!
Hopefully someone could answer the question on here for me - do these use a headset system similar to the Specialized & Treks (i.e. bearings sit directly onto moulded carbon) or do they use more normal ZS top & bottom cup?
I am tempted by one and can get them on a decent deal, but would like to slacken it out a touch with an angleset to something I personally prefer.
I am tempted by one and can get them on a decent deal, but would like to slacken it out a touch with an angleset to something I personally prefer.
Seems to sit on the carbon to me. I think at 160mm travel and 75° it wouldn’t really need changing, certainly haven’t noticed it being terrible going from 74° on my old bike to 75.5° on the Rise, more grip on the front if anything!
Maybe 9point8 will come with something that fits? Slack-R is designed for integrated headsets.
siciliano
New Member
Are the rotors centerlock or 6 bolt? I want to upgrade mine when the bike comes in. Also why not 203 for front and back? Thanks
RickBullotta
E*POWAH Elite World Champion
Right. They are supposed to come stock on the bike from what I read, but the parts shortage prevents this. Galfer and SRAM must know something about producing parts that Shimano isn’t aware of.6 bolt. Good luck finding 203mm 6 bolt rotors in stock.
jim0905
Active member
Ah OK. I have mine in profile 2 and the range always shows as 106 when I switch on with a full battery??
RickBullotta
E*POWAH Elite World Champion
I'm going to give a Galfer 203mm rotor a shot in the front. Will report results. I've run their rotors and pads successfully on my KTM 350.
RickBullotta
E*POWAH Elite World Champion
Same - I'm going 203F 180R.
Mine came with centrelock
have ordered a set of Hunt 6bolt wheels so need to swap them over too.
siciliano
New Member
Wait...so some come with center lock? I ordered a m-team coming next week and have no idea which it hasMine came with centrelock
have ordered a set of Hunt 6bolt wheels so need to swap them over too.
Mine was M20 not M team
siciliano
New Member
Can someone with an m-team let me know? I found the 203 in stock but 6 bolt
RickBullotta
E*POWAH Elite World Champion
raceface wheels are 6 bolt only
Got mine yesterday xl M Team and managed to Invisiframe it today it was quite a easy one to do for anyone thinking of adding the kit
RickBullotta
E*POWAH Elite World Champion
Quick update:
On my Rise LTD today (internal 360 WH battery only), I did a 13 mile ride today on very technical terrain, with 1600 feet of climbing, and finished with 80% of my battery remaining. I think that's pretty insanely good. I did ride in "OFF" a good bit (flats and climbs), "ECO" a good bit, and "TRAIL" a tiny bit. I got a good workout. There's NO WAY I could have ridden my Pivot Shuttle in OFF on these trails. The 11 pound weight difference is very noticeable. I think the design of the Rise is perfect for a reasonably fit person who wants an eMTB as a "range extender" to ride longer and faster or to add another day or two a week.
The only remaining issue I have is a front brake (XTR 4 piston/M-9120) that won't stop squealing. De-glazed pads and rotors, cleaned them in alcohol, still there. I'm going to swap the pads out for new ones and put a 203mm Galfer rotor on.
On my Rise LTD today (internal 360 WH battery only), I did a 13 mile ride today on very technical terrain, with 1600 feet of climbing, and finished with 80% of my battery remaining. I think that's pretty insanely good. I did ride in "OFF" a good bit (flats and climbs), "ECO" a good bit, and "TRAIL" a tiny bit. I got a good workout. There's NO WAY I could have ridden my Pivot Shuttle in OFF on these trails. The 11 pound weight difference is very noticeable. I think the design of the Rise is perfect for a reasonably fit person who wants an eMTB as a "range extender" to ride longer and faster or to add another day or two a week.
The only remaining issue I have is a front brake (XTR 4 piston/M-9120) that won't stop squealing. De-glazed pads and rotors, cleaned them in alcohol, still there. I'm going to swap the pads out for new ones and put a 203mm Galfer rotor on.
Can someone with a 6bolt rotor rear wheel post a photo of the magnet position please?
RickBullotta
E*POWAH Elite World Champion
Not really much to see - this is the magnet (link below), and it bolts on under two of the disc bolts.
MAGNET DISC 6 BOLT ORBEA — Orbea
RickBullotta
E*POWAH Elite World Champion
How are you liking the Galfer rotors?
Any of you guys swapped the tyres out yet ??
If so what replacements did you go for
If so what replacements did you go for
Similar threads
EMTB Forums
Latest articles
-
Santa Cruz Vala X0 review - a new approach to perfection?
The new Vala is Santa Cruz’ first attempt on a Bosch-powered emtb. Like...- Knut Nes
- 6 min read
- Views: 372
- Reaction score: 2
- Comments: 2
-
A new standard for charging ebikes is coming? A quick interview with Bosch - charge2bike
I had a quick chat with dr Vikram Godbole about "charge2bike", a new...- Knut Nes
- 2 min read
- Views: 720
- Reaction score: 6
- Comments: 4