FeelFreeMTB
New Member
Six bolt
Cube Hybrid EMTB 2025 looks lit!
- Thread starter Hanzzzie
- Start date
Yes dropped torque down to 9nm and plenty of thread lock on that particular bolt,done 80km and it’s not budged yet
gio_se
Member
Don't forget that the Float X can be upgraded with the low-speed compression knob
:2022-2025 FLOAT X/DHX LSC Upgrade | Bike Tech Help Center | FOX
FeelFreeMTB
New Member
Hey cool, did not know thisDon't forget that the Float X can be upgraded with the low-speed compression knob
2022-2025 FLOAT X/DHX LSC Upgrade | Bike Tech Help Center | FOX
I have the black, it is definitely looking better in real life than on the pictures from their website. It is matte though and lack some brand writing (you almost can't see them)
Liked the purple version too but I never saw it irl so I can't say
I’ve got the purple. Super cool
deertrackdoctor
Member
I got rid of m creak by taking shock out and greasing up everything
FeelFreeMTB
New Member
My bike is back home. Shop said it was the shockbolts that creaked. Tomorrow I will ride my first big ride of a 1000 vertical metres
FeelFreeMTB
New Member
FeelFreeMTB
New Member
Can you guess why?
FeelFreeMTB
New Member
Gues it could be the bolts on the bottom of the battery, where the bracket sits with its connection. Mine was not properly fastened (two silver bolts) which resulted in play on the connection.
I’ve just checked now you mentioned it, dunno the torque value for the bolts but put 5nm on the wrench and it needed a few turns to click. Hopefully it doesn’t happen again. The bike was brilliant today, nice and quiet. I’m 85kg and settled on 83psi on fork and 4 clicks from fast with the 2 spacers removed and it’s feels brilliant to me. Reminds me of my old vitus esommet in the handling.
Hi everyone,
Loving this bike as I go faster and faster (way faster than my old non-electric bike by the way lol), but I have a strange problem, I need to inspect it more but maybe you will have some hints
I have a strange nose coming from the motor I think, I have it in video here :
You can hear it a bit if you listen carefully, in real life it's a lot more hearable (not thank you to the mud ahah)
It only appears when I'm in a quite high percentage slope, but only when using the higher sprockets (those with the biggest number of teeth). If I use the middle or lower sprockets there is no noise, it only increases with the more teeth I use. This is not logical as this is where I turn the legs the quickest and put the less torque on the system. It may not come from the motor of course, but noise comes from around there for sure
Loving this bike as I go faster and faster (way faster than my old non-electric bike by the way lol), but I have a strange problem, I need to inspect it more but maybe you will have some hints
I have a strange nose coming from the motor I think, I have it in video here :
You can hear it a bit if you listen carefully, in real life it's a lot more hearable (not thank you to the mud ahah)
It only appears when I'm in a quite high percentage slope, but only when using the higher sprockets (those with the biggest number of teeth). If I use the middle or lower sprockets there is no noise, it only increases with the more teeth I use. This is not logical as this is where I turn the legs the quickest and put the less torque on the system. It may not come from the motor of course, but noise comes from around there for sure
But it's like it's cracking and is going to explode (I may be exaggerating a bit ahah), never had a noise like that before
FeelFreeMTB
New Member
I cannot hear anything because of the other sounds. Try recording the sound on a street that climbs up, holding your phone near the bottom bracket.Hi everyone,
Loving this bike as I go faster and faster (way faster than my old non-electric bike by the way lol), but I have a strange problem, I need to inspect it more but maybe you will have some hints
I have a strange nose coming from the motor I think, I have it in video here :
You can hear it a bit if you listen carefully, in real life it's a lot more hearable (not thank you to the mud ahah)
It only appears when I'm in a quite high percentage slope, but only when using the higher sprockets (those with the biggest number of teeth). If I use the middle or lower sprockets there is no noise, it only increases with the more teeth I use. This is not logical as this is where I turn the legs the quickest and put the less torque on the system. It may not come from the motor of course, but noise comes from around there for sure
FeelFreeMTB
New Member
So what bottle do you use. I bought a Fidlock compact 750 but it doen't fit.
Just a cheap camelbak off Amazon. Think it’s 650ml or 700. Seems to fit just and does the job. Longer rides I used a hydration pack.
