Levo SL Gen 1 2020 Specialized Levo SL alloy custom build thread

[ImSundee]

FYI: 18.3KG for Carbon Medium
Levo SL Owners Thread - EMTB Forums

 

[73Steff]

Sorry for delays on this but back on schedule now and with time on my hands to get it finished?
Finial stages of refining the frame completed today in the sunshine.
Have gone a little further with the finish than on my Levo, but think as it’s an SL can get away with the higher shine to the finish (can always knock it back a bit if I want?)
Awaiting fork delivery in the week then we should be good to go on the build up.

 

[R120]

That is some impressive polishing - I take back what I said earlier about just taking it down the bead blasters!

 

[Blinkie]

I so want to try that. ?

 

[RCDallas]

That is going to be awesome when finished.... With the monster chip I have on my FF Levo Comp's top tube from it falling over in the workshop I will consider doing this myself.

 

[73Steff]

Build up started yesterday, just the internal cabling, fitted bearings, and motor back in. Hopefully some deliveries today and good to finish off?

 

[Killswitch73]

wow ! what a shine on that frame ...

 

[73Steff]

Final few bits arrived so build day today/tomorrow.
All pretty lightweight stuff, think I might just hit my target weight of matching a carbon framed SL??‍?

 

[R120]

NICE . .

 

[73Steff]

Hand fabricated titanium head badge......amazing what you can do with time on your hands!

*not final fit, still got some fettling to do

 

[R120]

Are we going to be seeing some raw cranks on this, like the Hopes?

 

[paquo]

View attachment 28545

That's a nice build !
I broke the plastic door that covers the charge port. How does that come off and install? Those 4 screws seemed to release something interal but the door part didn't want to come off.

 

[73Steff]

That's a nice build !
I broke the plastic door that covers the charge port. How does that come off and install? Those 4 screws seemed to release something interal but the door part didn't want to come off.

The four screws self tap into the plastic back section. Once they are out you will need to give the front cover a little tweek with something to lever it off. Nothing else holds in on but be careful the rear part inside the frame (pictured below) doesn’t drop in or you’ll have to drop motor to refit.

 

[Killswitch73]

The four screws self tap into the plastic back section. Once they are out you will need to give the front cover a little tweek with something to lever it off. Nothing else holds in on but be careful the rear part inside the frame (pictured below) doesn’t drop in or you’ll have to drop motor to refit.

View attachment 28696

how heavy is the main battery ?.. as im thinking of dropping motor and getting main battery out and going 3 extenders . 1 on bike 2 in evoc e-bike back pack .

 

[73Steff]

So pretty much done apart from the decals....so tempting to put up some shots but will resist until 100% done.
Did a final weight check.....spec below, I’m happy?

2020 Levo SL Alloy Raw frame
Rockshox Pike Ultimate 150 travel
Roval SL carbon wheelset w/ Maxxis Ardent exo tyres - tubeless
Sram Guide Ultimate brakes & Disc w/ Ti bolts throughout
Sram XX1 Eagle drive train
Rockshox AXS dropper & ti railed carbon saddle
Deity Carbon bars
Deity stem
Deity grips
Crank brother eggbeater pedals (prob change these as they are crap!)

 

[73Steff]

how heavy is the main battery ?.. as im thinking of dropping motor and getting main battery out and going 3 extenders . 1 on bike 2 in evoc e-bike back pack .

You could do that but all the weight would be in the wrong place, high up on your back rather than low down in the frame. It will impact the handling imo.

 

[Blinkie]

so tempting to put up some shots but will resist until 100% done.

 

[Konanige]

Just a quickie as you've had it apart, mine seems to have an annoying rattle from the downtube, did it look like any of the cables could be loosened or badly installed to create a rattle?

 

[73Steff]

Just a quickie as you've had it apart, mine seems to have an annoying rattle from the downtube, did it look like any of the cables could be loosened or badly installed to create a rattle?

I’d take the TCU out and see if those cables/connectors are a cause. Had that on my Alloy Levo and wrapped in foam tape to resolve.
Other than that there are two solid plastic pipes that guide the brake/shifter cables. Just a push fit at the top of down tube, could rattle if they came loose I suppose but you’d need to drop motor & battery out to see.

 

[73Steff]

Teaser shot.....

 

[Rob Rides EMTB]

Teaser shot.....

View attachment 28706

Need an article for the front page!

 

[Konanige]

I’d take the TCU out and see if those cables/connectors are a cause. Had that on my Alloy Levo and wrapped in foam tape to resolve.
Other than that there are two solid plastic pipes that guide the brake/shifter cables. Just a push fit at the top of down tube, could rattle if they came loose I suppose but you’d need to drop motor & battery out to see.

Thanks for that, its definitely coming from lower down, I'll drop the motor out and have a peek.

 

[R120]

Are the callipers on the Guide Ultimates raw too?

 

[miPbiP]

Spesh should sell bikes in raw finish.

 

[73Steff]

Are the callipers on the Guide Ultimates raw too?

Yep........no prizes for the Pike colour I went for??‍

 

[Killswitch73]

Braided hoses would look amazing on this bike .

 

[73Steff]

Need an article for the front page!

decals should be with me any day.....let me know what you want Rob?

 

[SquireRides]

Thanks for that, its definitely coming from lower down, I'll drop the motor out and have a peek.

Same here. Sounds like cables on my SL. I've given up trying to find the source, but post back if you have any luck.

 

[Konanige]

Same here. Sounds like cables on my SL. I've given up trying to find the source, but post back if you have any luck.

Dropped motor out and tried wrapping cables with some foam, no joy noise is still there. I fear it may be coming from the motor so I'm going to use the 'ride it till it breaks' diagnostic system!

 

[Killswitch73]

Any updates ?