KODAKHODAK
Member
Much needed Ergon SM Comp Saddle - Feels nice, keen to try it out soon!
What did you buy your ebike this week?
- Thread starter Simoto123
- Start date
Interested in why you chose this saddle over the E- bike specific saddle ?
I'm considering the latter after damaging my WTB Bel Air which has been my perch of choice for as long as I can remember ..
Tubby G
❤️🔥 Hot Stuff ❤️🔥
If you like WTB then you could try the Koda
I use the Volt, but she has the Koda and it’s well comfy. Decent price too
I'll have a look ..
Edit : ..Typo above ..its SDG Bel Air ..not WTB
..I'm really wanting to try one of the Ergon saddles as I've read lots of good reports ..
Last edited:
A06
Member
A pristine set of Fox 38 factory forks for a dirt cheap price! They have a scratch on the Kashima coating which matters not at all to me as I'm installing a Vorsprung Smashpot kit in them...bringing me to my 2nd purchase this week. About to order decals for the forks also.
kefconstruction
Active member
New mudguards fitted today
KODAKHODAK
Member
I am a light 74kg guy felt the EMTB was
prefer the more flatter saddle compared to the eMTB version, our climbs here in Australia not so high compared to overseas terrain.
They don't fit anything like as well as my old shoes. Returned.
beanzz
Member
Welp all the parts for my blue pig build are on their way.
Full slx drivetrain from bike components.de for 250
4 pot deores
H1900 wheelset
Dmr wingbar mk4 and dmr defy50 stem
Hope 203mm floating disc in purple
Maxxis minion dhr2 maxxterra etc etc
Dvo sapphire for 250 from pb
And that's pretty much it
Full slx drivetrain from bike components.de for 250
4 pot deores
H1900 wheelset
Dmr wingbar mk4 and dmr defy50 stem
Hope 203mm floating disc in purple
Maxxis minion dhr2 maxxterra etc etc
Dvo sapphire for 250 from pb
And that's pretty much it
Montana St Alum
Active member
Those and Scotch. Two great achievements.No.
a tyre
We invented them. have the decency to spell them properly
You're replying to a thread from October 2019..?
Happy reading ..let us know when you've fully caught up
Expidia
Well-known member
You will love it. At least your "ass" will haha. Ergon gets the prize for having the most confusing saddle names and models.
I have two SM E-Mountain Core saddles ($159 each). I like the slightly extra padding for my sometimes 2-3 hours in the saddle rides. I also like the way the Mountain Core turns up a little in the rear for even further comfort. I recently returned their SM Pro version $99 (which I bought just for the red trim) but I could definitely feel the little less padding in this model over the Ebike SM E-Mountain Core version. The SM Pro I'm sure is fine for going up and down steeper trails. They only make two sizes, so if your two sit bones are 4 inches or less apart . . . go with their S/M (Small/Medium) vs their M/L (Medium/Large). Numbess & Soreness are a thing of the past with Ergon. For sizing, bike shops have a gel board you sit on for sit bone sizing (but then you might feel obligated to buy it from them). Or just place a piece of cardboard box on a flat hard surface, sit on it for a min or two and then measure between the two sit bone impressions. I prefer using Amazon as I like to be able to exchange for another model if need be rather than deal with the returning grief of a LBS.
I just went through exactly the same experience. Buying another pair of leather ones instead!
Montana St Alum
Active member
Really? You went back to 2019 to check out where I am in this thread?You're replying to a thread from October 2019..?
Happy reading ..let us know when you've fully caught up
Are you the thread Karen?
Were you the best hall monitor ever in grade school?
I think I'll go ride now.
Last edited:
Slymobi
E*POWAH Elite
I'm just popping out for the popcorn 
No I didn't have to you dork ..I just had to click on Gary's post ( who by the way no longer contributes )
RiderOnTheStorm
E*POWAH Master
I miss the attitude in his old posts...No I didn't have to you dork ..I just had to click on Gary's post ( who by the way no longer contributes )
I could never work out if he held a view on something or not.
I read someone's post on here a while back saying that as he was no longer riding his ebike ..then he felt he had nothing to contribute ..but that he was alive & well..
I liked him ..straight talker ..even if I cringed at times with his directness..
Slymobi
E*POWAH Elite
Just bought another pair of the leather ones. Hard to find 'Black' size 45/10.5 at a sensible price but finally found some at £65 which is 40% off.
Semmelrocc
E*POWAH Master
After more than 5.500 km I had to replace my Cube RFR SLT 2.0 pedals, because they started emitting cracking noises and I couldn't find any spare parts.
So my new pedals are DMR V12 with magnesium body - fully serviceable and rather light weight at 350 g. The Cr-Mo axle can be replaced by a Titanium one so I'll have an option to go even more lightweight in the future.
So my new pedals are DMR V12 with magnesium body - fully serviceable and rather light weight at 350 g. The Cr-Mo axle can be replaced by a Titanium one so I'll have an option to go even more lightweight in the future.
steve_sordy
Wedding Crasher
I bought a pair of DMR Vaults (very similar to your V12) in 2010 and an identical pair (black with blue pins) two years later when I bought a second bike. I have had both pairs ever since, swapping them over on to new bikes as the years passed. I no longer know which pedals are which. The bearings in the two of them have been replaced a total of three times (but it might be four). But I genuinely have no idea which pedals have been done how many times. They just keep going on and on.
A small tip: Place an "O" ring on the pedal axis up against the wiper seal of the pedal. It helps to stop penetration by water and grit.
These are my favorite pedals - best grip ever - you can also play with longer pins.
I usually buy the bare metal ones, because paint won't last long on a pedal and then they look worse.. Last time I found some really cheap offer for the orange one - went ahead sanding all the paint off
still worth it
Semmelrocc
E*POWAH Master
Well in my case it doesn't matter it they start taking on a used look - given the look of my crank arms.
steve_sordy
Wedding Crasher
Here is a shot of the Vaults on my bike. The shot after is the back-up pair (they look in slightly better condition).
You will notice that I have removed the centre pin on each side. They did too much damage to my legs!
You will notice that I have removed the centre pin on each side. They did too much damage to my legs!
Expidia
Well-known member
That is a great idea on just removing the center pin. My DMR Vaults were also making my legs look like a hamburger! Switched to these pinless flats in red and also black and legs look great again
Last edited:
steve_sordy
Wedding Crasher
Have you been spying on me!That is a great idea on just removing the center pin. My DMR Vaults were also making my legs look like a hamburger! Switched to these pinless flats and legs look great again
View attachment 117300
Similar threads
EMTB Forums
Latest articles
-
2025 Canyon Spectral:ONfly CF Ltd review
We were quite surprised to read about the new lightweight Canyon...- Knut Nes
- 7 min read
- Views: 847
- Comments: 1
-
Santa Cruz Vala X0 review - a new approach to perfection?
The new Vala is Santa Cruz’ first attempt on a Bosch-powered emtb. Like...- Knut Nes
- 6 min read
- Views: 10K
- Reaction score: 6
- Comments: 20