What did you buy your ebike this week?

[KlaasNorg]

Could not resist these oil slick one up pedals

 

[Ark]

I bought a new saddle Ergon SM E-Mountain Core Prime, I already fitted it and can't be bothered to go and take a photo so here's the next best thing

Expensive but super comfortable for my wide backside, The seat that came with my bike whilst padded wasn't quite wide enough and made me feel a little sore.

This one has a slope at the rear to offer support whilst riding up hill too


Next Upgrade for me is probably some fancy pedals, currently I just have some really cheap Bontrager Elite flat pedals that cost about £25 lol...
I was planning to steal the pedals off my other bike but it's been 190miles or so and I haven't bothered to yet..

They are only nylon race face anyway so not a whole lot better.

Might get my some hope pedals

 

[RiderOnTheStorm]

I was looking for some larger pedals for my size 11 and found the new Atlas pedals from Race Face. Installed them on my Scott eRide Strike and been very happy with them. They are about 118 x 120 x 14, so a comfortable platform size. Also light at ~370g. They came with 20 sharp pins each. Gotta love canadian design!

 

[FirstAscent]

Because I can’t stand traditional water bottle cages plenty of room too

 

[Bongles Grandad]

I was looking for some larger pedals for my size 11 and found the new Atlas pedals from Race Face. Installed them on my Scott eRide Strike and been very happy with them. They are about 118 x 120 x 14, so a comfortable platform size. Also light at ~370g. They came with 20 sharp pins each. Gotta love canadian design!
View attachment 112726

cool

 

[Bongles Grandad]

View attachment 112345
Could not resist these oil slick one up pedals

double cool

 

[Emilio-Trek rail 9.7]

Crank bash guards for my 5Dev cranks.
In clear color since the cranks are polished aluminum.

 

[Stan63]

2 x Continental Ruban Tyres

Looking for new rear shock, forks, Hope Duo lever

 

[BeBiker]

Presta zu Schrader Ventilkonverter

Hochwertiger Ventilkonverter. Lieferung in 2 Tagen.

www.radcranks.de

 

[IndigoUnicorn]

While I didn’t ride this past winter, I did spend money on the e-bikes.

Picked up pedal extenders off Amazon for both ebikes. I’m terribly pleased with how my hip is better aligned with my ankle while pedaling with these things.

As for the Priority, it’s gotten several goodies:

Enormous flat pedals, cheapies from Amazon. These things are like pedaling on platforms. I love ‘em.

Fresh tires for the Priority, too. I’ve decided I HATE the WTB gum wall tires. Not because the rolling surface is bad or anything, but because sealant seeps from the sidewalls making the wheels a weepy, gooey mess AND they just lose 10–15 pounds of air pressure daily. Not fun, do not recommend.

Just installed a set of Teravail Rutland tires and am hoping they’ll be a better choice.

Also, shorter crank arms. Went from 170 mm to 165 mm, and I can’t believe it’s taken me this long to get around to this upgrade.

New brakes, too! Shimano Deore BR-MT420 brake set: BL-M4100 brake levers and BR-MT420 4-piston calipers.

Decided to try out a suspension seat post on the Priority. I like it so much I’ve uninstalled the PNW dropper from the Trek MTB and have another of these suspension posts on order for it.

Lastly (for now), I picked up a Burley Minnow for cheap off FB Marketplace. Removed the child’s seat assembly, and now it’s a primo dog carrying trailer. Because the dachsie must come with—though I’ve only brought the ancient Norwich terrier along once. He’s 17, deaf, blind, and has doggie dementia. I could not tell if he was having fun or not.

 

[Emilio-Trek rail 9.7]

Swapping the Maxxis DHR2 and Assegai from my Ibis Ripley to the Trek Rail, moving the Bontrager tires from the Rail to the ripley where I think will make a better fit. Those maxxis were too much tire for the ripley and I think just about right for the Rail.
Also new Valve stems for the Rail

 

[FirstAscent]

Do you ever lie to yourself? I said I wasn’t going to get one even though I knew it was only a matter of time haha.
Since I had upgraded to AXS shifter/derailleur, I finally got the Reverb AXS dropper. I got the 34.9/170mm model

Second, sneak peak at a new tire which will be one of the final touches to my new build/theme. Should be ready for a full reveal next week after one more important piece shows up

 

[RiderOnTheStorm]

I continued to upgrade my mid-range bike, slightly lowering its weight with a carbon handlebar. Something I always wanted to try to reduce bar vibrations (my hands tend to get numb on long rides). So I bought the Race Face SixC bar (20mm rise, 785mm width, UD carbon). First impression, it feels solid, has perfect angle and width from the get go (no cut needed for my needs). Of course it's light at ~220g. We'll see if my rides improve.

 

[jimbob]

Some colour coordinated cable ends (even I feel I've gone too far when I'm worrying about such things that you can't even see from a couple of meters away, but hey ho) and some cheap cable pliers to go with them. Because I want a professional looking crimp rather than the mashed by pliers look.

If only I put the same level of effort into working out how to ride the thing well.

 

[FirstAscent]

View attachment 113141

Some colour coordinated cable ends (even I feel I've gone too far when I'm worrying about such things that you can't even see from a couple of meters away, but hey ho) and some cheap cable pliers to go with them. Because I want a professional looking crimp rather than the mashed by pliers look.

If only I put the same level of effort into working out how to ride the thing well.

It’s the little things that count! I’m all about those little details including a proper crimp.
So completely understandable haha and normal to me

 

[Tooks]

New pedals today. Always had Shimano SPDs for as long as I can remember, but thought I’d try some Hope Trails.

Test ride later, but the click in and out already feels really nice and a bit easier.

 

[RiderOnTheStorm]

I replaced the basic jockey wheels on my SRAM derailleur with AluGear Aero pulleys, CNC machined aluminum, narrow/wide cogs, ball bearings, and made in Poland. They are quiet and have a nice, functional design (no openings that would catch branches and cause a mess...)

 

[FirstAscent]

I was excited then was quickly reminded how much I hate installing Cushcore haha

I’d never have this happen before but this time I had such a hard time putting sealant in, it took me forever! Never been like that before on any of my bikes

 

[Tombie]

Wifey said “this can’t be orange” - and now it’s not!

The little details are important.

 

[James_MTB]

New pedals today. Always had Shimano SPDs for as long as I can remember, but thought I’d try some Hope Trails.

Test ride later, but the click in and out already feels really nice and a bit easier.

View attachment 113178
View attachment 113179

New pedals today. Always had Shimano SPDs for as long as I can remember, but thought I’d try some Hope Trails.

Test ride later, but the click in and out already feels really nice and a bit easier.

View attachment 113178
View attachment 113179

What did you think?

 

[Expidia]

Trek Powerfly came all black and pretty boring looking. Then I upgraded to purple trim. Now I went with red. Now I have 3 different outfits for my Trek. What the hell, I change my clothing outfits and now so does my Ebike .

But I still have not figured out my Trek's "personal pronoun" yet

I also have a red trimmed Ergon seat on the way to balance it off.

 

[Ark]

Enormous flat pedals, cheapies from Amazon. These things are like pedaling on platforms. I love ‘em.

I had some of those on my old bike.
but are they really high quality fakes or real
That was the question a bunch of reviews were pondering at the time when I ordered some

They seemed legit though with the packaging etc I got and the bearings seem to last just fine as did the pedals

 

[IndigoUnicorn]

I had some of those on my old bike.
but are they really high quality fakes or real
That was the question a bunch of reviews were pondering at the time when I ordered some

They seemed legit though with the packaging etc I got and the bearings seem to last just fine as did the pedals

Only have a couple hundred miles on them so far. The bearings are holding up well to the sand and dust, but they sure get dirty fast.

 

[RiderOnTheStorm]

I also have a red trimmed Ergon seat on the way to balance it off.

Great saddle choice I also use the Ergon SM Pro, "Risky Red" trim. Took the risk and found it rather comfortable even on longer rides.

 

[Expidia]

Great saddle choice I also use the Ergon SM Pro, "Risky Red" trim. Took the risk and found it rather comfortable even on longer rides.

Thanks Rider. Ya I actually have been using Ergon's SM E-Mountain Core Prime version over last season and it's been great. No numbness even on 2 hour rides for me. I'm hoping this SM Pro is just as comfortable because think it's a tad narrower and $50 cheaper than the one I use now. . . . Weird the way Ergon has so many saddle models yet only a few models available in trim other than black. The SM Pro comes in black, red or blue.

 

[RiderOnTheStorm]

If I recall the SM E-Mountain Core Prime has thicker padding than fhe SM Pro which in turn has better padding than the SM Enduro Comp. Definitely difficult to make an informed decision with Ergon saddles in my opinion.

 

[irie]

No more sore bum after 2 hours.

 

[Expidia]

If I recall the SM E-Mountain Core Prime has thicker padding than fhe SM Pro which in turn has better padding than the SM Enduro Comp. Definitely difficult to make an informed decision with Ergon saddles in my opinion.

That's why I bought it from Amazon as they have a liberal return policy. I'll try it for a few rides and see if the comfort level is close to the Core Prime and it's something I can live with. I don't run up and down rock fields and roots on the mountains as I'm 74. I'm more single track and XCountry rider. If the Pro works for me, I'll keep my Core Prime as a back up spare as after a spill or mishap I've seen many saddles take a hit and rip on the outside corners.

 

[RiderOnTheStorm]

Got the new, pure Black version of the Fidlock Twist bottle. Great german design! Compared to the smoke/seethrough version, the drink may warm up faster in the sunlight, but it sure looks cool

 

[Dave_B]

o the shame…..a dorky mud guard…..