What did you buy your ebike this week?

N

NULevo

Well-known member
Nov 7, 2019
539
341
Nottingham
A Steadyrack MTB, a real space saver and no more 'Your bike's in the way' from SHMBO :)

imag4.jpg


imag2.jpg
 
Last edited:
steve_sordy

steve_sordy

Wedding Crasher
Nov 5, 2018
9,105
9,594
Lincolnshire, UK
Two 50ml bottles of Shimano mineral oil brake fluid and two of those tiny, tiny "O" rings that go either on the end of the syringe or on the bleed screw. I nearly always lose one of them every time I bleed a bike. :giggle:

Both from Epic Bleed Solutions
 

N

NULevo

Well-known member
Nov 7, 2019
539
341
Nottingham
Motoride said:
Is there a weight limit? Do you think it can hold an ebike
Click to expand...

Yes, weight limit is 35kg, and it says designed for MTB/eMTB.

A really solid piece of kit, fitted in under an hour and it's holding up my Levo. It also swivels almost 180 degrees, and the bike can be loaded at any angle.
 
P

PJ27

Member
Jan 8, 2020
114
42
Australia
Trickz said:
View attachment 23613 View attachment 23612 rear e-wild fitted,amazed at the thickness,quality of these tyres,tight fitment also and it seated with ease,makes a DD assegai feel like a exo tyre in comparison?? View attachment 23614
£35 at the moment for a quality tyre like this!
Click to expand...
Hey Trickz, bike looks awesome. How have you found the Michelin on the rear? What handlebars/ model/ spec are you running? I am am tall ride and they looks comfortable. Also what is the rear mudguard?

Thanks
 
Zimmerframe

Zimmerframe

MUPPET
Subscriber
Jun 12, 2019
14,063
20,859
Brittany, France
iXi said:
Will this fit any e8000 or do you need specific mounting holes etc
Click to expand...
Should just mount to two of the three chain guide mount holes. If you already have the factory guide you'll need the special tool to remove the spider to dismount it. If not, then you should be able to attach it to any e7000/e8000 without removing anything.
 
  • Like
Reactions: iXi
R120

R120

Moderator
Subscriber
Apr 13, 2018
7,819
9,190
Surrey
Fits any e8000 but may not fit every bike if the frame oversails the side of the motor too much. To get the old one off as @Zimmerframe says you need to remove the spider - this is the e13 one fitted. Both the E13 and the Funn one can be fitted and removed without taking off the chainring/spider as they are only 2 vs 3 bolts, provided you spider clears the bolts. With the E13 you have to space it to the chain using washers behind the mount, whereas on the Funn one you get spacers for the head itself which is much better design. Also the Funn mount is alloy, the stock Shimano and E13 Plastic. I will do a write up once I have installed the Funn.

Screenshot 2020-05-01 at 18.31.36.png
 
  • Like
Reactions: iXi

arawa

arawa

Well-known member
Jun 17, 2019
180
154
Highlands
Forgive me because I am old and knackered.
On my last hardtail bike I had a Cane Creek Thudbuster seat post that was really good at ironing out bumps. However, my new bike has a drop seat so the Thudbuster could not be transferred.
After a lot of research, I splashed out on a Brooks sprung saddle and have done several runs now. It might look old fashioned but VERY impressed; it really makes a difference.

https://www.brooksengland.com/en_uk/saddles/touring-trekking/flyer.html

Mine was in a sale so much cheaper!
 
R120

R120

Moderator
Subscriber
Apr 13, 2018
7,819
9,190
Surrey
arawa said:
Forgive me because I am old and knackered.
On my last hardtail bike I had a Cane Creek Thudbuster seat post that was really good at ironing out bumps. However, my new bike has a drop seat so the Thudbuster could not be transferred.
After a lot of research, I splashed out on a Brooks sprung saddle and have done several runs now. It might look old fashioned but VERY impressed; it really makes a difference.

https://www.brooksengland.com/en_uk/saddles/touring-trekking/flyer.html

Mine was in a sale so much cheaper!
Click to expand...
Good saddles those, I have one on a bike that must be over 30 years old and still going strong.
 
iXi

iXi

E*POWAH Master
Feb 17, 2019
436
331
Brisbane
R120 said:
Fits any e8000 but may not fit every bike if the frame oversails the side of the motor too much. To get the old one off as @Zimmerframe says you need to remove the spider - this is the e13 one fitted. Both the E13 and the Funn one can be fitted and removed without taking off the chainring/spider as they are only 2 vs 3 bolts, provided you spider clears the bolts. With the E13 you have to space it to the chain using washers behind the mount, whereas on the Funn one you get spacers for the head itself which is much better design. Also the Funn mount is alloy, the stock Shimano and E13 Plastic. I will do a write up once I have installed the Funn.

View attachment 30598
Click to expand...
I'm out of luck then but thanks for the info. I have no mounting holes. Truly was an oversight on norco behalf. I noticed they've got it right with the latest iteration.
 
R120

R120

Moderator
Subscriber
Apr 13, 2018
7,819
9,190
Surrey
iXi said:
I'm out of luck then but thanks for the info. I have no mounting holes. Truly was an oversight on norco behalf. I noticed they've got it right with the latest iteration.
Click to expand...
Yes I recall the first gen not having a chain guide, but I also recall someone on the forum doing a workaround - I think its in the main Norco thread
 
p3eps

p3eps

E*POWAH Elite World Champion
Subscriber
Dec 14, 2019
1,983
2,405
Scotland
Got a slit in my DHRII tyre last night, so decided to try a Michelin Wild Enduro instead. Ordered the gum front and rear... a bottle of Stan’s racing sealant, and a Stan's Dart tubeless repair tool.
 

KenX

KenX

E*POWAH Master
Jul 21, 2019
292
249
Briançon, France
OneUp Carbon bar, 10mm lower (20mm rise) coz the Decoy's pretty high and now super plush on the bars, does a really good job of dampening the ripples/stones etc (y)
 
Trickz

Trickz

E*POWAH Master
Patreon
Sep 2, 2019
265
253
Burton upon Trent
PJ27 said:
Hey Trickz, bike looks awesome. How have you found the Michelin on the rear? What handlebars/ model/ spec are you running? I am am tall ride and they looks comfortable. Also what is the rear mudguard?

Thanks
Click to expand...
B4CB36B0-EC05-4B49-A82A-2A50902C399F.jpeg


cheers buddy ? I found the ewild very good,it hasn’t got the straight line grip as the assagai but cornering is on par but rolls soo much better,regards cockpit I’ve changed around a bit,I tried a 35 reach stem but ended up going back to the 40mm,I’ve also now got the v2 Nukeproof 800mm carbon bars with 38mm rise,the v2 versions are like rolled forward more in the design So still giving you the 9 degree back sweep but with 10mm more reach than the v1‘s which I’ve stuck on the Hardtail,since back injury I struggle with neck to get good forward vision so a high cockpit helps?The rear mudguard is just a standard front mudhugger with just a few holes drilled and a scoop out the side for the chain,the front is now a mudhugger shorty?
 
P

PJ27

Member
Jan 8, 2020
114
42
Australia
AW
Trickz said:
View attachment 30686

cheers buddy ? I found the ewild very good,it hasn’t got the straight line grip as the assagai but cornering is on par but rolls soo much better,regards cockpit I’ve changed around a bit,I tried a 35 reach stem but ended up going back to the 40mm,I’ve also now got the v2 Nukeproof 800mm carbon bars with 38mm rise,the v2 versions are like rolled forward more in the design So still giving you the 9 degree back sweep but with 10mm more reach than the v1‘s which I’ve stuck on the Hardtail,since back injury I struggle with neck to get good forward vision so a high cockpit helps?The rear mudguard is just a standard front mudhugger with just a few holes drilled and a scoop out the side for the chain,the front is now a mudhugger shorty?
Click to expand...

AWESOME. Your bike looks INSANE. Love it.

Interetsed too in the Nukeproof V2 handlebars as well. With the slightly longer reach from the bars you have better control and front end grip? I am 6'4, my bike (2020Focus Jam2) is great, but think a little bit of tweaking could be in order. Bars currently 780mm so thinking 800mm with a slightly longer stem (currently 35mm). Thanks again for all the info.
 

You must log in or register to reply here.

Similar threads

Mik3F
What did you do to your EBike this week?
14 15 16
Replies
465
Views
52K
Stihldog
Stihldog
Semmelrocc
What did you build your bike this week?
Replies
9
Views
2K
steve_sordy
steve_sordy
jeroen
What stupid thing did you do with your bike this week?
2 3
Replies
72
Views
15K
Ark
A
speedkills
How do you like what you bought your ebike last week?
Replies
16
Views
4K
CodyDog
CodyDog
B
How the heck did you decide what to buy?
2 3 4
Replies
112
Views
25K
TommyC
T

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

559K
Messages
28,319
Members
Join Our Community

Latest articles

View more articles

Top