STUnlocker (ex Shimano STEPS Unlocker) Android & Windows App for derestriction/market change and etc

[Albez]

Will the derestriction be available above firmware 4.3 in the future?

 

[chubbsR1]

Hey Vladd,

I just downloaded the link and when i open the app on the laptop it shows this before opening and isn't connecting through the SM-PCE02?

any ideas?

 

[nickw1965]

Hey Vladd,

I just downloaded the link and when i open the app on the laptop it shows this before opening and isn't connecting through the SM-PCE02?

any ideas?

View attachment 15274

If using a Shimano SM-PCE1 for the first time you need to load the free E-TUBE PROJECT.Don not try and connect to bike as you need the driver which will automatically load once installed.Nextconnect up to the bike on spare port and fire up SHIMANO UNLOCKER

 

[chubbsR1]

Ah, so I plugged in the PCE-02 and downloaded the e-tune project, seems I didn’t leave it unplugged and it must have updated? Even though it did ask me to do an update which I didn’t...??

How do I get back to getting this to work?

Seems the access violation comes up as soon as I open the unlocker app on the laptop...

 

[nickw1965]

Worth back tracking.Delete etune / tuning app and delete drivers if possible.Reload E tune first then drivers.Then download app again and try connecting ,keep an eye on port used and make sure correct.

 

[Peterg]

Vadll.
Will my version work with your unlock

license

 

[vadII]

4.7.0 does not have any unlock features. You can find info at www.stepsunlocker.com

 

[paoloc971]

hi Vadl, as with your app you are able to read the battery status, do you think you could do something to make it possible to read this percentage on the bike display instead of the five bars shown actually? I think that it wuold be really appreciated!

It requires to make a custom firmware for a SC unit. So, I think, it worthless

Vadl if Garmin is able to read the % of battery on their devices, why couldn't it be done with a simple app that shows % of the battery along the ride?

 

[Bikal]

Hi All
just installed the Android App and then wanted to go to stepsunlocker.com

But my Bitdefender shows following critical Notification. Does anybody have experience with this, is there a simple answer to that, or is this page really critical?

 

[gtaadicto]

Virustotal says its clean except for Bitdefender, don't know why. VirusTotal

 

[HORSPWR]

4.7.0 does not have any unlock features. You can find info at www.stepsunlocker.com

Damn, updated my DU firmware to 4.7.0 yesterday and found this thread today.

 

[Momo]

there is an issue with the webpage... used to work fine until 2-3 days ago, now :

 

[HORSPWR]

Damn, updated my DU firmware to 4.7.0 yesterday and found this thread today.

But downgraded my firmware today and switched over to US destination.

You Sir vadll are a dead set legend, I am now one happy camper!!

 

[Bikal]

Today I decided to by the license, 30 Min. later my bike had pretty small wheels and accelerated to more than 30 Kmh. That's absolutely fantastic and a good deal.
I prefer to change only circumference of my wheels, so there will never be a hidden speed recording above 25 Kmh under assistance. I think this is the best way not to jeopardise warranty. I do not care about speed indication, for this I have GPS. With the app I can change back to original settings within a minute, before driving on public roads.


Thanks very much to the authors.

 

[jsalas2]

Yea! success, had to use my wife's android, but was able to downgrade the firmware to 4.6. I am in the US and received an eu new motor on warranty. Shimano was not able to switch it to the US speed remotely. I was using a Peartune dongle and the new firmware was not letting it work. Now with the previous firmware. I'm good to go. Thank you.

 

[m0v1em4n]

Hi Vadll and guys,
I have now down grade my firmware to 4.6.1 on my E8000 motor if I get a licence will that allow me to change region and wheel circumference
Thanks

 

[HORSPWR]

Hi Vadll and guys,
I have now down grade my firmware to 4.6.1 on my E8000 motor if I get a licence will that allow me to change region and wheel circumference
Thanks

It sure will ?

 

[m0v1em4n]

Ok guys,
I have connected the app to my bike and sent a request for a license in the side menu but how can you tell if the request was successful ? Didn’t seem to do much

 

[HORSPWR]

Ok guys,
I have connected the app to my bike and sent a request for a license in the side menu but how can you tell if the request was successful ? Didn’t seem to do much

He will email you the key, when you open it then it will automatically open the app and load the license key.

That's how it did it for me on my iPhone, simple and took only a few seconds.
Ensure you say open in app when the email link asks you on your phone.

 

[m0v1em4n]

He will email you the key, when you open it then it will automatically open the app and load the license key.

That's how it did it for me on my iPhone, simple and took only a few seconds.
Ensure you say open in app when the email link asks you on your phone.

Thanks, just haven’t received anything yet no email no payment instruction nothing

 

[HORSPWR]

Thanks, just haven’t received anything yet no email no payment instruction nothing

He's is usually pretty quick to respond to emails, he will send you a link to pay via Paypal, check your spam/junk mail folders to, mine landed in there.

 

[m0v1em4n]

Hi Vadll still looking to get the full licence, but you don’t seem to reply to messages , email’s or the request in the app for a full licence

 

[HORSPWR]

Hi Vadll still looking to get the full licence, but you don’t seem to reply to messages , email’s or the request in the app for a full licence

How'd you go, any response yet?

 

[vadII]

New version was uploaded to Google Play for FULL support of latest FWs (4.7.0 & 4.4.0 (E6xxx, E7000).
Downgrading is not required anymore.
Enjoy!

 

[HORSPWR]

New version was uploaded to Google Play for FULL support of latest FWs (4.7.0 & 4.4.0 (E6xxx, E7000).
Downgrading is not required anymore.
Enjoy!

You legend!!!

 

[Garrit Verway]

Hi VadII
Like to thank u for your ongoing product development , and I am loving the presets, especially the anti theft , even if they do manage the visible lock, they only end up stealing a 2 wheeled anchor
Once again, many thanks keep up the good work.

 

[m0v1em4n]

How'd you go, any response yet?

Yes mate , seem like the mail app on my iPhone wasn’t doing what it was supposed to do has regards sending the licence request, all sorted now

 

[m0v1em4n]

New version was uploaded to Google Play for FULL support of latest FWs (4.7.0 & 4.4.0 (E6xxx, E7000).
Downgrading is not required anymore.
Enjoy!

Is this update coming to Apple devices ?

 

[vadII]

Yes, it's available right now

Is this update coming to Apple devices ?

 

[m0v1em4n]

Yes, it's available right now

Thanks apple a bit bit slow in showing it has a update, had to go to the app in the AppStore which asked me to update , great work

Hi VadII
Like to thank u for your ongoing product development , and I am loving the presets, especially the anti theft , even if they do manage the visible lock, they only end up stealing a 2 wheeled anchor
Once again, many thanks keep up the good work.

Is the anti theft available on all e8000 or is it bike maker specific, I have read about it but can’t seem to find it