Sam engine bash guard?
- Thread starter Crush
- Start date
Focus JAM 2 (Bosch), cubre motor, sump guard, motor guard
on ebay but can`t see how it fixes to rear of motor
Collect 25 Nectar points Redeem your pointsOpens in a new window or tab | ConditionsOpens in a new window or tab
- Thread starter
- #5
Hi mate, from these guys. https://m.facebook.com/StandUpMTB/
had one on my kenevo too, they’re good quality and can take an absolute beating.
had one on my kenevo too, they’re good quality and can take an absolute beating.
is it the guard thats on ebay that only holds on by the front bolts?
what happens ifit gets a wack from the side?
think i`ll make my own, i think it needs to be practical
and do the job
- Thread starter
- #10
I had the same guard on a Levo, then transferred it to a Kenevo.
So used it for four years... look at it... Obviously saved my bike hundreds of times, as our trails are rocky as can be.
Never got a hit up the side, would have to be pretty unlucky for it to slip past the bottom, up the side and hit the engine IMO.
So used it for four years... look at it... Obviously saved my bike hundreds of times, as our trails are rocky as can be.
Never got a hit up the side, would have to be pretty unlucky for it to slip past the bottom, up the side and hit the engine IMO.
Garry
Member
@ paul-g - how did you order from them? I can't find a website or any way of ordering.
no bud didn`t order one.
looked at them and thought not my type
of engineering just having 2 bolts on the
downtube and no fixing to the rear, big hit
and you`ve split or damaged the ali.
they really need to be fixed all round.
you only need to buy the best one once
- Thread starter
- #13
Should have mentioned. There is a zip tie attached at the other end, threaded around a bolt on the engine... and double sided mounting tape to velcro between the guard and the engine itself.
I only had the other guard attached using mounting tape to the kenevo and it never came off so I think it'll be fine.
I only had the other guard attached using mounting tape to the kenevo and it never came off so I think it'll be fine.
Clue
Member
E-Bike engine guard Focus, models TRON, JAM² (except 9.9) and SAM²
Aluminum protective skid plate for Focus, models TRON, JAM² and SAM² equipped with the Bosch motor (not compatible on models equipped with the Shimano motor), which allows protection of the engine fins.
I have not tried it, but I have orderd one for my Jam2.
Clue
Member
I have installed it, but not yet crashed into anything ? so no durability testing as of now. The installation was easy, remove the screws from motor and replace with the ones that come with the guard. It does seem alot more durable than the one I bought from e-bay being aluminium and all. Be aware that the screws that come with the guard are of a low quality, I say this beacause I messed up the head of one of them when i diddent have my bit correctly in place and I did not apply much torq before it happend.
Other than that, no issues.
Other than that, no issues.
Last edited:
Cancer73
New Member
How's the bash guard doing there mate? Are you still happy with the buy or any cons? Thanks Dave
Phil3
New Member
Ive got the same one fitted to my Thron² 6.9, can’t comment too much on overall durability as I’ve only used it twice since fitting it last week… but fitment wise is seems spot on
Cancer73
New Member
Thanks for the reply. Curious because I found this one on a random google search...Ive got the same one fitted to my Thron² 6.9, can’t comment too much on overall durability as I’ve only used it twice since fitting it last week… but fitment wise is seems spot on
Still interested in what others are using. I've got a JAM2 6.8 and just adding bits to it. Great bike, almost cracked 1Kkms and lovin' it.
Phil3
New Member
Thanks for the reply. Curious because I found this one on a random google search...
Still interested in what others are using. I've got a JAM2 6.8 and just adding bits to it. Great bike, almost cracked 1Kkms and lovin' it.
Never seen they knew before, you can clearly see how/where they’re fixing it to the bike, but not sure if it like to be as secure as the AVS guard?!
Nice one, I’m a week into owning mine so still getting to grips with it
Cancer73
New Member
Yeah it's hard to know without physically seeing and hands on. No info on materials used or price yet so waiting to hear from distributor. I'll post here once I know, for interest. Steep learning curve but heaps of fun.Never seen they knew before, you can clearly see how/where they’re fixing it to the bike, but not sure if it like to be as secure as the AVS guard?!
Nice one, I’m a week into owning mine so still getting to grips with it
EMTB Forums
Latest articles
-
A new standard for charging ebikes is coming? A quick interview with Bosch - charge2bike
I had a quick chat with dr Vikram Godbole about "charge2bike", a new...- Knut Nes
- 2 min read
- Views: 487
- Reaction score: 6
- Comments: 2
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two...