I just finished a ride on auto mode, managed to go 25.6 km with 910 m of climbing. By the end the battery was at its lowest I’ve seen so far, it turned orange for a bit then kicked me out of auto and into the lowest power mode. Just after that the orange battery light started blinking, I didn’t manage to get it to completely turn off, but I assume it was about to. At one point while climbing I was getting a different whine out of the motor that I haven’t heard before, not sure if it was a bad thing or not.
Reign E+ 2022
- Thread starter zorro77
- Start date
25km range is kind of really weak, no ?
Just bought the same bike, makes me nervous that I won't be able to ride as much as I was thinking!
yesterday I did 36 kilometers between the first two modes and I only spent two stripes
the general engine noise is quieter than the pw-2, they have improved it.
If I feel a noise when I stop pedaling suddenly, for 1 or 2 seconds until the motor stops, as if it disengages, I don't know if I explain myself well, for someone else the same thing happens
It is beautiful, I have the same one, there is a detail in the box where it says the REIGN E model, as it is also dark, it is hardly appreciated
It will go a lot further if you stick to the lower power modes, I think if I did a ride in mode 2 or 3 the whole time I could go quite a bit further. While I’m climbing in auto it definitely is using full power while going up fire roads, if I use auto it will use a bar of battery in the first 20 min or about 7 or so km of riding. I’m also 230lbs, so that probably doesn’t help.
I get the stop pedalling noise out of the motor as well, the noise I heard was while pedalling up using power, I’ll see if it happens again.
I get the stop pedalling noise out of the motor as well, the noise I heard was while pedalling up using power, I’ll see if it happens again.
How is your experience about battery consumption. I'm a little frustrated about mine with the 625 wh. My first ride happens 95% at 200% push, so it's the middle of what is possible but it costs me 74% battery power for 31.3 km and 847hm. That means around 40km and 1000 hm it's over ☹
My weight is 92 kg.
My weight is 92 kg.
- Thread starter
- #398
Buone notizie sull'autonomia della batteria, ma Ride Control d+ non è vero, la mia app ouxMaps di solito è vera (so che questo tour è qualcosa in più di 1400d+
-50% 1217d+ Non 1458d+
-61% 1470d+ Non 1906d+
Molto molto molto Felice!!!
PS. io sono 85kg
-50% 1217d+ Non 1458d+
-61% 1470d+ Non 1906d+
Molto molto molto Felice!!!
PS. io sono 85kg
Last edited:
Which mode were you riding the most ?
This is the noise it makes when you pedal hard and stop suddenly, then in normal gear it goes well, it is only in some sudden acceleration and stop.
The bike has 50 kilometers, is it normal for the new pw-x3 engine? It does not affect the operation, just that engine noise.
The bike has 50 kilometers, is it normal for the new pw-x3 engine? It does not affect the operation, just that engine noise.
Polaris
Active member
Thanks bud, the pics of the E+0 above have XT’s fitted too, that’s why I asked.
Your stem doesn’t look like the Giant Contact SL 35 that these come with either
- Thread starter
- #402
Hello,
My 2022 E+1 sounds like this too.
When i ride and try to pedal with the wrong gear (typically a gear too low for the speed my bike is moving), it sounds like this.
I guess it's related to the internal gears (motor engaging / disengaging, based on sensors informations).
I hope that with some update they will solve it
If it's technology related, i think we'll have to deal with it.
The pw-x3 is so nice for everything else, i won't mind.
And the annoyance on a 3 or 4H ride may count for 5 to 10 occurrences, lasting each 1 to 3 seconds, so ...
On a another side :
My E+1 arrived the first week from october.
I had issue for charging my battery (inside the bike), with insane recharge time.
I went to LBS, got an update.
Battery recharge time is ok now. But i noticed the motor became even better, in every aspect (especially the peak power on smartassist, more powerfull when things go crazy).
trailaddict
Active member
It's a 50mm RF Stem and 35mm e13 bars with 30mm rise.Your stem doesn’t look like the Giant Contact SL 35 that these come with either
jaylkay
New Member
Anyone got some or seen any comparisons between Spesh or Bosch in terms of range / performance of the motor? There's not a great deal of comparison info yet, obviously supply is playing a part in this. My E+1 comes in early December, was thinking a rail but this beast looks mega.
If you go to the App and the Update starts it say smart gateway 10y update. If you check Google is that the brain which controls the can bus and the data handling with bt and ant+.
www.ebike24.com
In the app you can check the version under bike details. What it fixes i don't know.
Giant and Liv 2021 with New Control Units and Displays - E-Bike Blog
Smart Gateway is the name of the new interface for the control units. Almost all new Giant and Liv e-bikes have it. The system is not backwards compatible.
www.ebike24.com
In the app you can check the version under bike details. What it fixes i don't know.
Last edited:
Dominic1212
Member
Hi,
got my E+ 0 last Week and did about 120 km in total. Is there any way to tell this stupid app to reconnect by itself when the connection was lost during an Ride? I always have to press "Tap here to reconnect" to continue the ride.
@jaylkay:
i can give you an comparison to an 2021´Levo and 2018´Kenevo:
- Batterie consumption even or slytly better (compared to Levo 700Wh )
- Yamaha louder
- strange sound when decuppling from high revs
- Brose has more bottom power- Yamaha likes high cadence
Greetings from Germany
got my E+ 0 last Week and did about 120 km in total. Is there any way to tell this stupid app to reconnect by itself when the connection was lost during an Ride? I always have to press "Tap here to reconnect" to continue the ride.
@jaylkay:
i can give you an comparison to an 2021´Levo and 2018´Kenevo:
- Batterie consumption even or slytly better (compared to Levo 700Wh )
- Yamaha louder
- strange sound when decuppling from high revs
- Brose has more bottom power- Yamaha likes high cadence
Greetings from Germany
Compared to my Levo 2020 it feels different for me. In my mind the brose has not as much torque at low cadence as the yamaha but more power at the top. My feeling depends especially to the afterrun of the brose that makes it sometimes more difficult for technical sections. Technical uphill sections with the yamaha are easier for me because the motor stops when i stop and if i start pedaling i can do it slower with more torque what makes me more stable.
To battery consumption i'm in trouble with mine and i have to do more tests but for that i'll be back later.
For the rest i'm with you.
Just did a ride with a friend riding a 2019 Turbo Levo S-Works with the 700WH battery. He tried my 2022 Reign E+2, immediately saw that the Yamaha motor has less bottom end power, requires a few pedal spins and good cadence to feel the boost.
I wasn't able to climb as fast as my friend as I must downshift to get that high cadence to get the motor boost me up the hill.
I'm 100lbs more than my friend combined with the fact that the Brose has more low end power, I'm having a hard time folowing him on the steeper climbs, otherwise no problem going as fast.
I will also need a 2nd battery or Energypark plus, otherwise I'll be out of battery rather quickly (I'm 260lbs).
I also switched the flip chip to the HIGH position, did anyone notice any changes by switching the flip chip ?
Good clean up after a muddy ride!
I wasn't able to climb as fast as my friend as I must downshift to get that high cadence to get the motor boost me up the hill.
I'm 100lbs more than my friend combined with the fact that the Brose has more low end power, I'm having a hard time folowing him on the steeper climbs, otherwise no problem going as fast.
I will also need a 2nd battery or Energypark plus, otherwise I'll be out of battery rather quickly (I'm 260lbs).
I also switched the flip chip to the HIGH position, did anyone notice any changes by switching the flip chip ?
Good clean up after a muddy ride!
I want opinions from people who also have the new yamaha pw-x3 engine in the new giant reign 20222, the bike has only 50 km, I want to know if it is normal or if someone who has the same model also happens.
when you pedal, it has a little dead center, before you start to push the wheel with a clicking noise.
when you pedal, it has a little dead center, before you start to push the wheel with a clicking noise.
Polaris
Active member
This is slightly disappointing to hear, I presume the power isn’t being limited by software somehow? Settings or app on full boost? I’m hearing a few others are hearing odd noises on disengagement etc?
Polaris
Active member
That sounds normal after coming from shimano and Bosch systems, just sounds like motor engagement
Last edited:
Are you using auto-mode? Or the standard settings? This is interesting, as I've never tried a Brose, but find the Yamaha pretty torquey in general.
Last edited:
Nasty Nick
Well-known member
Looks like you have maybe 20 mm of post exposed below the collar. Can you slam it that extra distance? If so that's not much less than the extra 30mm needed for the 210 post.
Dominic1212
Member
Measured 350 max insert length on an M frame
Ordinary Human Male
New Member
That's great. Should be able to slam quite a few 200mm droppers.
EMTB Forums
Latest articles
-
The most reliable motor brand (in Norway)
A poll was posted on a big Norwegian emtb facebook group. There are...- Knut Nes
- 3 min read
- Views: 1K
- Reaction score: 5
- Comments: 6
-
2025 Canyon Spectral:ONfly CF Ltd review
We were quite surprised to read about the new lightweight Canyon...- Knut Nes
- 7 min read
- Views: 970
- Comments: 1