JimLee-Lightcarbon
Lightcarbon
An installation video of M820 on LCE930:
@JimLee-LightcarbonHi Jim,
Have you found any alternative solution to connecting an extender battery directly to the main battery?
Connect the extended battery cable into the out charge port.
In theory it is possible because the Forestal also uses Bafang batteries and Bafang Besst tools.I wonder if a Forestal software up grade would make a difference?
it will work ? if that's all what is needed that's good.Connect the extended battery cable into the out charge port.
Connect the extended battery cable into the out charge port.
Cable of sensor should be two-parts style
View attachment 124112
Two parts style is easy to trough the hole on chain stay, If you try to trough the charin stay is ok, that's fine,Hey, why do you say, that is should be two part style? I have one part style, and I havent found an issue with it yet. I did't connect it yet, but I did route it trough the chain stay just fine.
Please no drill the hole on that, use the hole for sensor cable,View attachment 124121
I will use this dualbattery discharger, but I have to drill a hole in this place for the connection. I hope that's O.k.
@JimLee-Lightcarbon ??
View attachment 124122
Only insert the extended battery when the main battery is out of power, and do not leave the interface connected all the time. In addition, ensure that the voltage of the extended battery is not less than that of the main battery. If possible, please use an anti-backflow device.it will work ? if that's all what is needed that's good.
Don't we need a diode to avoid current flowing it back ?
Yes, enough place for a 13S3P custom batteryAnyone already make custom battery inside the frame? Can we put 30pcs 21700 battery for 36v 10s3p configuration?
How U hold that battery to frame?Yes, enough place for a 13S3P custom battery
This is a 13S2P and the "3P" would be 14 cm longer
View attachment 124315 View attachment 124318 View attachment 124316 View attachment 124317
If you tie the cables, there is enough space here; but you need to pass the cables through the downtube first, and then install the battery.Guys, I'd like to add a powerful light for my bike and the integrated light output does not provide the needed power.
The solution proposed by klamp is a regulator, to plug directly on your battery connection but the regulator is quite big : 75x35x22mm
For those who installed their battery (btf014), do you think there's enough room in the frame after the battery is installed ? Do you see any other option ?
I've tried to look for 48v-9v DC to DC regulator with an output of 4Amps but it's quite complicated to find that!
thanks! I will try thisIf you tie the cables, there is enough space here; but you need to pass the cables through the downtube first, and then install the battery.
View attachment 124335
The serial connection between the parallel blocs are done with wires? Is it enough to handle the current?Here’s my diy battery build, 10S 3P 18650 cells wrapped in carbon.
View attachment 124416 View attachment 124417 View attachment 124418 View attachment 124419 View attachment 124420 View attachment 124421 View attachment 124422
with 18650 cell will fit on 3x2 row. but with 21700 will it fit to frame?Here’s my diy battery build, 10S 3P 18650 cells wrapped in carbon.
View attachment 124416 View attachment 124417 View attachment 124418 View attachment 124419 View attachment 124420 View attachment 124421 View attachment 124422
I’m not sure they would need to be staggered, My battery is the same size as the bafang battery 63 x 53 and it’s really tight.with 18650 cell will fit on 3x2 row. but with 21700 will it fit to frame?
the standard battery is 410wh,. with 18650 cells, if you use DIY battery with 21700wh, the battery can be 540wh, you find the big battery from a italy bike brand, right? the frame is from us and they make the battery by themself,Hey @JimLee-Lightcarbon , what's the biggest battery that can fit the frame? I think I saw in a different post that there is a 21700 540wh battery available for m820? Thanks!
what is this brand jim? keen to see specs of battery as cannot get the bafang battery to n.z nowthe standard battery is 410wh,. with 18650 cells, if you use DIY battery with 21700wh, the battery can be 540wh, you find the big battery from a italy bike brand, right? the frame is from us and they make the battery by themself,
I went to full 29 but maybe if I change wheels et one day I'll go mullethas anyone tried running the 930 in a mullet setup with 29 front and 27.5 rear?
I've built mine this way. I'm still waiting on my battery though, so I haven't ridden it yet.has anyone tried running the 930 in a mullet setup with 29 front and 27.5 rear?
the brand is AGAZZINI BIKEwhat is this brand jim? keen to see specs of battery as cannot get the bafang battery to n.z now
The World's largest electric mountain bike community.