Hoppy
Member
So i have started to hate the sram G2 rsc brake that are stock on my expert. Not strong enough. So after some research decided to give the code rsc a try. My question is can i change the rear without needing to bleed if already together in the box. I did this by magura instruction on another bike before but was all external routed cable. I think the process was keep lever port turned up and unhook then keep caliper below the open cable end. Pull it through the frame reconnect and done? I have the reverb red barrel thing to connect to old cable to new for pulling. Will it just pull through easy or will i need to drop motor or something?
any tips from someone already through this wouldbe much appreciated thank you
any tips from someone already through this wouldbe much appreciated thank you