Hows everyone getting on with their New AMflow

avman

Member
May 24, 2021
37
15
hull
i picked mine up Sat after a 5 hour round trip and its possibly broken in the first 2 miles of riding , just around the local park. for what little riding have done the bike felt really powerful even in trail mode.

The issue is the Motor is making a squeaking noise and is difficult to turn as though its rubbing on seals, looks like i will be returning the unit but nothing from the LBS so far after sending the videos to them of the issue.
 

DS.

Member
Mar 15, 2019
92
63
Devon
You better get back on that 5 hour round trip again this is what is putting me off buying one no one near me is selling them plus no small frame sizes
 

Nick_V

Member
Oct 9, 2020
31
36
UK
Oh no thats not good, hopefully will get sorted quickly. Mine arrived on saturday and had a great shakedown ride on Sunday on local trails. Loved the way it rode, coming from an Orbea Rise had a similar handling feel. The Power though is just immense, I will definitely dial down in the settings soon.

Hope you get yours sorted. Its the first failure I have heard of so far
 

Bogdan_CH

Member
Apr 22, 2020
35
9
Oradea, Romania
Almost everything is made in China nowadays or overseas but that doesn't matter that much as long as customer support is equal to western world standard. DJI tick these boxes with drones but can they hold the flag for their ebike motors? We shall see aas this is sustained alot by the PRC.
 

mustclime

Active member
Apr 19, 2023
454
361
New Jerzy
If you didn't see it look around in your house and you'll probably see most parts of your stuff is made in....😉
Not really, my washer and dryer are old Leandra Matt units that can be maintained (15+) years old, USA, the microwave is a 20 year old unit made in the USA, the fridge is made in Mexico as well as the stove and the water heater. I find it cheaper to buy and maintain quality items rather than buy and replace cheap crap. Anything made in mainland China is made by slave labor. Slave labor is not known for its quality.
 

Amflow_Support

Amflow
Subscriber
Nov 19, 2024
50
74
China
i picked mine up Sat after a 5 hour round trip and its possibly broken in the first 2 miles of riding , just around the local park. for what little riding have done the bike felt really powerful even in trail mode.

The issue is the Motor is making a squeaking noise and is difficult to turn as though its rubbing on seals, looks like i will be returning the unit but nothing from the LBS so far after sending the videos to them of the issue.
Hi dear customer, we are sorry to hear about the issues you are experiencing with your bike. We understand how frustrating this must be, especially after such a long trip to pick it up.

To help us diagnose and resolve the problem as quickly as possible, could you please send an email with the video of the motor issue to our support team at [email protected]? Our team will be able to assist you remotely and provide the necessary troubleshooting steps.

Additionally, to ensure we can connect with you promptly, please mention in your email that you were referred from the EMTB Forums.

Thank you for your patience and understanding. We are committed to resolving this issue for you as soon as possible.
 

Nick_V

Member
Oct 9, 2020
31
36
UK
Not really, my washer and dryer are old Leandra Matt units that can be maintained (15+) years old, USA, the microwave is a 20 year old unit made in the USA, the fridge is made in Mexico as well as the stove and the water heater. I find it cheaper to buy and maintain quality items rather than buy and replace cheap crap. Anything made in mainland China is made by slave labor. Slave labor is not known for its quality.
Maybe dont browse an Amflow Forum if you are that negative towards the bike. Many have purchased and will be coming here to share ideas/problems & tips. You may be right, the quality may end up being crap, but then again it may not. My first ebike had 5 Motor failures within the 1st year and that wasn’t made in China ( Bosch).
 

mustclime

Active member
Apr 19, 2023
454
361
New Jerzy
Maybe dont browse an Amflow Forum if you are that negative towards the bike. Many have purchased and will be coming here to share ideas/problems & tips. You may be right, the quality may end up being crap, but then again it may not. My first ebike had 5 Motor failures within the 1st year and that wasn’t made in China ( Bosch).
If you killed 5 Bosch units in one year, the problem might be you. Back in the 70’s when I raced bmx there were kids that took pride in braking any and all frames just to prove it could be done. Is That how you are riding e bike or are you storing you it in the bottom of a pond?
 

Nick_V

Member
Oct 9, 2020
31
36
UK
If you killed 5 Bosch units in one year, the problem might be you. Back in the 70’s when I raced bmx there were kids that took pride in braking any and all frames just to prove it could be done. Is That how you are riding e bike or are you storing you it in the bottom of a pond?
Slight typo, was 5 Motors in 5 years, with Bosch a new warranty started with each new one, The final Motor has lasted 4 years and is still going strong. Not stored in a Pond but ridden in wet Uk weather. first 2 developed play in bearings, 2nd 2 had water ingress. No the problem isn’t me, have owned others ( Yamaha PWx2 & Shimano ep8) and had no similar problems
 

darwink1

Well-known member
Dec 19, 2022
241
629
Ontario, Canada
If you killed 5 Bosch units in one year, the problem might be you. Back in the 70’s when I raced bmx there were kids that took pride in braking any and all frames just to prove it could be done. Is That how you are riding e bike or are you storing you it in the bottom of a pond?
Can you guys meet up somewhere and fuck already? All this flirting is getting lame.

D
 

MartinShires

Member
Feb 4, 2022
7
6
Edinburgh
Slight typo, was 5 Motors in 5 years, with Bosch a new warranty started with each new one, The final Motor has lasted 4 years and is still going strong. Not stored in a Pond but ridden in wet Uk weather. first 2 developed play in bearings, 2nd 2 had water ingress. No the problem isn’t me, have owned others ( Yamaha PWx2 & Shimano ep8) and had no similar problems
Indeed and agree with you. Bosch failed after 800 miles, washed & rinsed by hand weekly, dried, polished, cover removed and excess dirt removed every 2 weeks with mini hoover and stored in my warm, dry 3rd bedroom every night. I ride in eco/tour, follow all recommended seal servicing and battery maintenance etc etc - it happens right, no matter how careful we are.
 

Gavalar

Active member
Feb 4, 2019
359
229
UK
i picked mine up Sat after a 5 hour round trip and its possibly broken in the first 2 miles of riding , just around the local park. for what little riding have done the bike felt really powerful even in trail mode.

The issue is the Motor is making a squeaking noise and is difficult to turn as though its rubbing on seals, looks like i will be returning the unit but nothing from the LBS so far after sending the videos to them of the

i picked mine up Sat after a 5 hour round trip and its possibly broken in the first 2 miles of riding , just around the local park. for what little riding have done the bike felt really powerful even in trail mode.

The issue is the Motor is making a squeaking noise and is difficult to turn as though its rubbing on seals, looks like i will be returning the unit but nothing from the LBS so far after sending the videos to them of the issue.
A 5 hour round trip,
i picked mine up Sat after a 5 hour round trip and its possibly broken in the first 2 miles of riding , just around the local park. for what little riding have done the bike felt really powerful even in trail mode.

The issue is the Motor is making a squeaking noise and is difficult to turn as though its rubbing on seals, looks like i will be returning the unit but nothing from the LBS so far after sending the videos to them of the issue.
5 hour round trip, did you not test ride it before returning home?
 

Downhillr

Active member
Jul 2, 2021
304
159
SF Bay, California
Not really, my washer and dryer are old Leandra Matt units that can be maintained (15+) years old, USA, the microwave is a 20 year old unit made in the USA, the fridge is made in Mexico as well as the stove and the water heater. I find it cheaper to buy and maintain quality items rather than buy and replace cheap crap. Anything made in mainland China is made by slave labor. Slave labor is not known for its
 

calvintys

Active member
Sep 12, 2023
264
259
Malaysia
I had it with a new canyon the bike would turn on but the motor wouldn’t work so sent it back it’s a hassle when the dealer is not near you this is why I ride a Levo
I been hear a lot of story about LEVO , not turning and water inside motor after 1000km. I even seen 3 levo break in one week. How do you say about it. It all basically just luck. My friend LEVO SWORK broke after 1 week and his problem its non stop until he is planning to sue Specialized for it.
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

559K
Messages
28,287
Members
Join Our Community

Latest articles


Top