Is your battery cover white as well, love that look.
Dengfu E10 - Build-up
- Thread starter Bogdan
- Start date
Velu Gautam
New Member
thaeber
Well-known member
It‘s not a chain guide, it‘s more of a chain silencer / chainstay guard called STFU. I‘m using it with a narrow / wide chainring in front, and a Shimano Deore Derailleur with Damper. I never had an issue with chain drop until now.
Velu Gautam
New Member
Will RockShox Super Deluxe Ultimate RCT Debon Air 210x55mm Rear Shock for Santa Cruz Heckler 2020+ (https://www.bike24.com/p2483239.html) fit in E10?
Canadian Bacon
New Member
Hi Guys,
I am in the middle of my E10 build, need some guidance on required disc brake mount adapter? I have a 180mm disk planned for the rear, I noticed that the shimano rear caliper screws are too long, does this frame require an adapter for that or shorter screws is the solution? Txs
I am in the middle of my E10 build, need some guidance on required disc brake mount adapter? I have a 180mm disk planned for the rear, I noticed that the shimano rear caliper screws are too long, does this frame require an adapter for that or shorter screws is the solution? Txs
Rear is designed for 180mm disc, you shouldn't need an adapter
Canadian Bacon
New Member
Thanks, so I will need shorter screws or extra fasteners.
Sunburntwily
Member
Hello all. Just a quick question. Have creaking noise that becomes apparent in left turns, and especially when pushing down hard on the left pedal in a left turn. Can't isolate it. Have tightened up motor mounts, pedal clamp. Ordinarily I would say it was the BB. Now I am thinking it's the rear disc. Any ideas? Thanks
Finally frame arrived !
Cable routing and rear slot printed and fitted to prevent cables damage stop getting a dirt to back of the motor
can you share 3d models for printing?
nice build.can you share te source of rear fender?
Pyr0
E*POWAH Master
RapidRacerProducts | ProGuard Front
The ProGuard is an amazing front mudguard for mountain bikes offering unmatched protection from mud and spray.
www.rapidracerproducts.com
thank youRapidRacerProducts | ProGuard Front
The ProGuard is an amazing front mudguard for mountain bikes offering unmatched protection from mud and spray.www.rapidracerproducts.com
Funfunfun
Member
No, It does not fit. However, the clutch system on my shimano Deore has kept it on ok without a need for a guard.
Lucky Luke
Member
[QUOTE = "dvng, publicación: 327830, miembro: 18031"]
¿Alguien ha logrado instalar la guía de cadena E10 sin que roce el soporte de la cadena? Está muy cerca del brazo del tirante y parece que se frotará cuando el tirante gire hacia arriba y hacia abajo.
[/ CITA]
My option
4,81 € 40% de DESCUENTO | Bicicleta Eléctrica guía para cadena bicicleta de aleación de aluminio Durable resistente Anti-oxidación bicicleta de herramientas para Bafang Motor ciclismo
¿Alguien ha logrado instalar la guía de cadena E10 sin que roce el soporte de la cadena? Está muy cerca del brazo del tirante y parece que se frotará cuando el tirante gire hacia arriba y hacia abajo.
[/ CITA]
My option
4,81 € 40% de DESCUENTO | Bicicleta Eléctrica guía para cadena bicicleta de aleación de aluminio Durable resistente Anti-oxidación bicicleta de herramientas para Bafang Motor ciclismo
BootsDave
Active member
Sherwin
New Member
Hi guys, Can anyone poing me to the correct website or link where I can order a dengfu E10 frame? i could not find it in their website. thanks
thaeber
Well-known member
E10 BAFANG- Dengfu Sports Equipment Co.Ltd
SMART AM FULL SUSPENSION E-BIKE FRAME E10 Use for: 29er Boost Suspension E-Bike Frame: E10 BAFANG Feature: Thru Axle (148mm) Material: full Toray
m.dengfubikes.com
Sherwin
New Member
i could not find an email or contact person. i only see a number. might be a problem if they only speak chinese
thaeber
Well-known member
Puschtrale
Active member
Can someone tell me where to buy new screws for my pedals (m500)?
demondazza
New Member
Hi there, I've recently finished my own build and was experiencing a similar issue to you. Fortunately, the noises seem to have corrected themselves and now it's quiet. Not sure if it was just a 'bedding in' issue or what. I was using parts from my previous bike so it could have been the chain/sprockets wearing in to a new build.
demondazza
New Member
Hi, I'm a new member and just wanted to share my experience with the order and build of the E10.
So initially I was a bit anxious to order the E10 as the process seems rather unusual. However, having received several rapid response emails from Melody and Dengfu, I decided to push the button. Within a month of ordering, I received delivery of the frame, motor and battery - all separately - it was amazingly quick!
The frame itself is very impressive. The weight of the motor and the battery is very scary at first touch - almost to the point I thought the ebike route was a mistake. I'm used to light bikes. However, once ridden, I'll never look back. What a blast!
With the help of this forum, I managed to put the bike together very quickly using mostly parts from my previous bike (a Norco Sight carbon). The hardest part and something I would never do again, was the custom paint job. Man, that was a pain. Sanding, primer, basecoats, stencils, clear coat, polishing - it was never ending. I think Dengfu offer a single colour paint job for under £100 - definitely worth going with that option if you can! The only other issue I've had so far is the crank arm length - too long. I'm seem to get pedal strikes on every ride so one to watch out for. I'll be on the look out for some shorter crank arms from Luna at some stage.
Anyway, here it is. A bit dusty as I've not had chance to clean it - too busy riding it instead.
So initially I was a bit anxious to order the E10 as the process seems rather unusual. However, having received several rapid response emails from Melody and Dengfu, I decided to push the button. Within a month of ordering, I received delivery of the frame, motor and battery - all separately - it was amazingly quick!
The frame itself is very impressive. The weight of the motor and the battery is very scary at first touch - almost to the point I thought the ebike route was a mistake. I'm used to light bikes. However, once ridden, I'll never look back. What a blast!
With the help of this forum, I managed to put the bike together very quickly using mostly parts from my previous bike (a Norco Sight carbon). The hardest part and something I would never do again, was the custom paint job. Man, that was a pain. Sanding, primer, basecoats, stencils, clear coat, polishing - it was never ending. I think Dengfu offer a single colour paint job for under £100 - definitely worth going with that option if you can! The only other issue I've had so far is the crank arm length - too long. I'm seem to get pedal strikes on every ride so one to watch out for. I'll be on the look out for some shorter crank arms from Luna at some stage.
Anyway, here it is. A bit dusty as I've not had chance to clean it - too busy riding it instead.
Great build!
What model of mudguards?
demondazza
New Member
Thank you!
The mudguards are Muckynutz MugGuard (short). £20 each on Amazon. They work well so far
demondazza
New Member
Sweet. Looks straight out of the army. Nicely done.
thaeber
Well-known member
Very nice and top spec! Sure it rides like a trail iron! But 24 kg with coil shock, ZEB and DH tires? Did You use a custom battery? Mine with M500, Mezzer Fork (together appr. 0.8 kg lighter) and coil shock is about 25 kg with Dengfu 840 Wh battery…
EMTB Forums
Latest articles
-
A new standard for charging ebikes is coming? A quick interview with Bosch - charge2bike
I had a quick chat with dr Vikram Godbole about "charge2bike", a new...- Knut Nes
- 2 min read
- Views: 613
- Reaction score: 6
- Comments: 2
-
Introducing the Forestal e-Cygnus - a downcountry and XC emtb
The new Forestal e-Cygnus is a slightly unusual emtb. It comes in two...