Cube Hybrid EMTB 2025 looks lit!

[Mister cube]

Oh nice. Take some pictures afterwards!
That blue color is very nice! My One44 TM should be coming next week. Also a nice color, but that blue might me the nicest color in the lineup.

Get it invisiframed,once its scratched,your on,y option is to wrap it!

 

[Niklas]

View attachment 154759
Ready for sub-120cm jumps! Warranty definitely not voided...

So weight wise the build above is 24.6kg with 400g pedals and ~300g of bottle holder+pump+multi tool. So just under 24kg with the 800wh and DH level tyres front and back.

I have the 600Wh battery en route, I'll report back whether knocking another kg off makes any noticeable difference in trail.

What size is tha?

 

[Rando_12345]

What size is tha?

L

 

[Hanzzzie]

hmmm the SRAM AXS specifically says to not chose 2-3-all gear skip on holding the button for EMTB's...
anyone knows the reasoning of that?

Also, i confirm that tubeless tape is placed inside the rims and is ready for sealant

 

[pedrod355]

Anyone came across any reviews on this bike yet?

 

[Hanzzzie]

Anyone came across any reviews on this bike yet?

Mine will get it's maiden voyage during lunch time...
i can try and compare it with the previous Bosch 4 (Cube AT)
i hope it's similar or better

 

[Elbikero]

Anyone came across any reviews on this bike yet?

Best reviews you will find are there I think. Found some posts on a deutsch forums, some videos on YouTube in Italian and deutsch too but that's it.

I have it, it seems to be a good bike and for sure I am not disappointed at the moment. Already beat my best time on my favorite trail by 4 seconds even though I need to adjust the rear brakes and go tubeless to lower the pressures and have more front grip. Comparing times with a not-electric giant reign 29. Yet I need to go test it in my very steep rocky trails, those trails you can only go with (almost) full rear brakes and pray for everything to go well ahah

 

[Hanzzzie]

Anyone put other tires on one of the new bikes?
On my previous AT, i used 2x Nobby Nic's and they were OK'ish...
BB/MM combo is grippy but high rolling resistance...
I'm riding in Belgium, normal trails here, not too crazy decents
Was thinking of getting Tacky Chan's or something similar.

 

[Rando_12345]

What tyres came stock with yours?

My one77 slx came with magic mary + tacky chan combo both in soft, really good choice out of the box.

I am running what was mounted on my DT wheels: a conti Kryptotal front (enduro soft) and an Albert Radial rear (super gravity soft). The kryptotal front has been great, works pretty much everywhere all the time, has barely any wear after a full year of riding! Albert radial I am less sure about, I don't have any major issue with it, but it didn't blow my mind like some of the reviews make out, it has worn quite a lot, but 6 months for a rear tyre is pretty good.

I had a bad experience with kryptotal out back a year ago, managed to get it warrantied, but it will probably be my next purchase. Tried a vittoria mazza, rode well but broke my rim with it and held a grudge against the tyre It couldn't possibly have been my terrible choice to huck into a rock garden in finale ligure!

 

[Hanzzzie]

Actionteam is Big Betty / Magic Mary combo

 

[Hanzzzie]

First ride was nice, it seems to feel a bit stiffer than the previous gen, allthough i didn't really go full on as it was my first ride
Gen5 noise level is OK, a bit down from Gen4, less whiny, performance wise seems to be the same.
Fork is renewed and has different adjustments, seems no lock is present in the front shock anaymore. have to figure out how that works...

 

[FeelFreeMTB]

My patience is again tested. I've ordered my ONE77 in november, but now it was delivered to the local bikeshop.....damaged chainstay and seatstay on transport!!! I have to wait for a new rear triangle.

 

[garypalmer]

My 177 arrived today, it will be assembled in the next few days, only the seat post and stem will be left, the rest will be customized, I hope to post photos this week...

 

[garypalmer]

After first ride... very very nice...

View attachment IMG_1866.jpeg

- 177 SLX L size frame
- Ohlins TTX2
- Sram Maven Ultimate 203 discs
- Sram GX AXS (never more T-Type, but this is other question)
- Renthal fatbar 800 40mm rise
- Hope 155m cranks
- DT H1900 (too soft, soon same hubs, with FR541 rims)
- Cube 170mm seatpost with Hope lever
- Assegai 2.5 DD MG and DHR2 2.5 DD MT with Tannus

Next week I will install a Fast SC5 cartridge (I have already a Vorsprung Luftkappe) on the Zeb (190mm) and the definitive stem, RF turbine or Hope in red colour (probably 40mm)

345mm BB Height with less slack fork position and other changes, but it seems like a lot more clearance than my last 2023 E-Reign with 340mm BBH, don't know why...

 

[JVC]

I've disassembled the bike's headset, but now I don't know if the two cups are properly seated or if they're offset from each other. How do I know if the two cups are aligned for 63.8 or 64.4?