Bosch 2023 Updates. Hill Hold, ABS and more

Rob Rides EMTB

Administrator
Staff member
Subscriber
Jan 14, 2018
6,260
13,700
Surrey, UK

I had the chance to try some new updates form Bosch recently and the new tech coming out is quite impressive. Finally, we have a mini remote. Sadly, existing Smart Controller users cannot replace it with the Mini Remote, as the brains of the bike (bluetooth etc) is now integrated into the Top Tube System Controller.

Hill Hold is actually useful, and is now available as an over the air update. And finally, ABS.... Woah, you just got to try this, and I will share a video on it soon. But I think it could actually be just as much a performance benefit as much as a safety benefit...
 

dobbyhasfriends

🌹Old Bloke 🎸
Subscriber
Sep 19, 2019
3,257
4,643
Llandovery, Wales
Dude. I didn’t even read what that meant.
I think I should consider my granny sometimes. She was really sweet. After like 8 shots of Canadian goose. God damn bunch of weenies.

by no means am I what anyone today wants to use as a metric.

well unless they care about result or performance. But that’s not a metric of 2022.
what ?????
 

Mteam

E*POWAH Elite
Aug 3, 2020
1,877
1,809
gone

I had the chance to try some new updates form Bosch recently and the new tech coming out is quite impressive. Finally, we have a mini remote. Sadly, existing Smart Controller users cannot replace it with the Mini Remote, as the brains of the bike (bluetooth etc) is now integrated into the Top Tube System Controller.

Hill Hold is actually useful, and is now available as an over the air update. And finally, ABS.... Woah, you just got to try this, and I will share a video on it soon. But I think it could actually be just as much a performance benefit as much as a safety benefit...
 

R120

Moderator
Subscriber
Apr 13, 2018
7,819
9,190
Surrey
I have mixed views on the ABS - on the one hand I can see it being a great thing to have, but on the other would it make me lazy? - proper braking technique is probably the key skill to going fast on an MTB after body positioning, and one of the key fundamentals to progressing.

However if I was riding around town on a cargo bike then the ABS would be top of my list of things i wanted.
 

kombos

Well-known member
Dec 18, 2019
252
311
Arizona
I have mixed views on the ABS - on the one hand I can see it being a great thing to have, but on the other would it make me lazy? - proper braking technique is probably the key skill to going fast on an MTB after body positioning, and one of the key fundamentals to progressing.

However if I was riding around town on a cargo bike then the ABS would be top of my list of things i wanted.

Sounds interesting….extra complication, but could be useful….

Would want to be able to disable ABS (or any nanny controls) for low traction scenarios where the ABS could prevent you from purposefully needing/wanting to skid the tires….same as on a 4x4 vehicle when offroading….
 

Planemo

E*POWAH Elite
Mar 12, 2021
605
706
Essex UK
Would want to be able to disable ABS (or any nanny controls) for low traction scenarios where the ABS could prevent you from purposefully needing/wanting to skid the tires…

How often do you 'need' to lock the front wheel on an MTB?
 

Rob Rides EMTB

Administrator
Staff member
Subscriber
Jan 14, 2018
6,260
13,700
Surrey, UK
You can disable the ABS completely.

I went into the test of the bike quite skeptical. I also rarely lock the front wheel. But after riding a few trails I realised that it wasnt about not skidding the front wheel, it was all about how hard I could brake, how quickly I could reach maximum braking and how fast I could slow the bike down.

It became more about reaching maximum braking performance, faster.

I left realising that with ABS, I can get close to 99.9% of front wheel braking performance, 100% of the time (even down the most technical and loose descents), and my regular biking, maybe I can get to 85-90%?

I think in wet, slippy mud and roots in the UK winter it possibly will provide even more of a performance benefit.

It’s not perfect though. I didn’t like the lever design. And I got a couple of calibrations errors (changing gears when lifting the rear wheel whilst the bike was stationary caused a calibration error). But as a near first EMTB ABS solution it’s promising.

Side note: after 2 days on ABS I had an OTB riding a techy trail in Verbier. I can’t say for sure ABS would have made any difference as I think my front wheel hooked up on a techy rocky DH trail (Tires Fire, Verbier) but I’m off the bike for a 5 days to a week to heal 😭
 
Last edited:

dobbyhasfriends

🌹Old Bloke 🎸
Subscriber
Sep 19, 2019
3,257
4,643
Llandovery, Wales
You can disable the ABS completely.

I went into the test of the bike quite skeptical. I also rarely lock the front wheel. But after riding a few trails I realised that it wasnt about not skidding the front wheel, it was all about how hard I could brake, how quickly I could reach maximum braking and how fast I could slow the bike down.

It became more about reaching maximum braking performance, faster.

I left realising that with ABS, I can get close to 99.9% of front wheel braking performance, 100% of the time (even down the most technical and loose descents), and my regular biking, maybe I can get to 85-90%?

I think in wet, slippy mud and roots in the UK winter it possibly will provide even more of a performance benefit.

It’s not perfect though. I didn’t like the lever design. And I got a couple of calibrations errors (changing gears when lifting the rear wheel whilst the bike was stationary caused a calibration error). But as a near first EMTB ABS solution it’s promising.

Side note: after 2 days on ABS I had an OTB riding a techy trail in Verbier. I can’t say for sure ABS would have made any difference as I think my front wheel hooked up on a techy rocky DH trail (Tires Fire, Verbier) but I’m off the bike for a 5 days to a week to heal 😭
got 2 important questions here....
1. is the bike ok
2 did you get it on video

:p
 

B1rdie

E*POWAH Elite World Champion
Subscriber
Feb 14, 2019
898
1,101
Brazil
Even though braking skills are key to riding fast, I see the abs as more of a safety than a speed aid.
 

Rob Rides EMTB

Administrator
Staff member
Subscriber
Jan 14, 2018
6,260
13,700
Surrey, UK
Even though braking skills are key to riding fast, I see the abs as more of a safety than a speed aid.
I think there could just be be enough performance gains in ABS that it gets banned from racing. If you can brake at 100% power every single time across a race then you have larger windows to be travelling faster.

The software actually has a Street mode and a Trail mode. The latter has more front wheel slip to increase braking performance. I imagine a race mode wouldn’t be too hard for them to implement.

Would be an interesting timed test by a pro on a 2-3 min DH/ enduro course
 
Last edited:

RustyMTB

E*POWAH Elite World Champion
Jul 22, 2020
2,853
6,894
UK
I didn't spend hours on end in A&E so that Bosch could swan up with their carefully engineered technology & take away my endo skillz. 😂
 

R120

Moderator
Subscriber
Apr 13, 2018
7,819
9,190
Surrey
Can you pull monster stoppies on it? Or when you lift rear wheel does it cut out
 

Baron

Active member
Nov 2, 2018
119
50
UK
You can disable the ABS completely.

I went into the test of the bike quite skeptical. I also rarely lock the front wheel. But after riding a few trails I realised that it wasnt about not skidding the front wheel, it was all about how hard I could brake, how quickly I could reach maximum braking and how fast I could slow the bike down.

It became more about reaching maximum braking performance, faster.

I left realising that with ABS, I can get close to 99.9% of front wheel braking performance, 100% of the time (even down the most technical and loose descents), and my regular biking, maybe I can get to 85-90%?

I think in wet, slippy mud and roots in the UK winter it possibly will provide even more of a performance benefit.

It’s not perfect though. I didn’t like the lever design. And I got a couple of calibrations errors (changing gears when lifting the rear wheel whilst the bike was stationary caused a calibration error). But as a near first EMTB ABS solution it’s promising.

Side note: after 2 days on ABS I had an OTB riding a techy trail in Verbier. I can’t say for sure ABS would have made any difference as I think my front wheel hooked up on a techy rocky DH trail (Tires Fire, Verbier) but I’m off the bike for a 5 days to a week to heal 😭

Brilliant write up as always Rob👍 I’m running MT7,s with upgraded levers(stock plastic ones were horrendous)and think the braking performance is some of the best I’ve experienced. Would you say I’m going to loose some of the “feel” I currently have with the new ABS system.
 
Last edited:

MrSimmo

E*POWAH Elite World Champion
Apr 24, 2020
1,096
1,047
The Trail.
I dunno, I don't like the idea of ABS on a mountain bike. Commuting etc yup but for me it removes the purity of a direct connection with the tyres/ground (for example I've never used ABS on track in a car nor offroad in/on any vehicle).

That said, I used to think EMTBs were for fat old lazy people. Then I rode one and now I won't go back...
 

EMTB Forums

Since 2018

The World's largest electric mountain bike community.

556K
Messages
28,081
Members
Join Our Community

Latest articles


Top