2022 Santa Cruz Heckler
- Thread starter Bencab
- Start date
luna87824
E*POWAH Master
How many times on your first ride did you use your dropper post?
Rusty762
Member
Does anyone know how to access the E tube app to change the assist modes or customize the display. I have tried the E Tube app on my iPhone but it says the firmware is not compatible?
I've used the E-Tube app plenty, but never run into what you describe. If I fire up E-Tube and there is new firmware available, it will tell me. I don't think I've ever modified my parameters before updating firmware. Are there updates available? If so, you might want to try updating the firmware, then trying to change the parameters.
Strange question, haven't a clue. Plenty of times.
Silent Drone
Member
Is that a 160 or 170 Zeb? I have the 160 on mine but I’m thinking about going 170 next spring.
It's 170, much prefer it, no detriment to handling at all.
JStrube
Active member
Just bought a nice new Heckler GX AXS for my wife, and a CC X01 RSV for myself... I am leaning on getting them ride wrapped right away. Picked hers up at a local dealer (2H away), and mine, I ordered from another state... None available in CA.
Moe Ped
Well-known member
Bought my son a Heckler for Christmas, got him a Tallboy a couple of years ago which he rides with me on my SL. This is for the rides on my Levo..
CC carbon with custom build by local shop.
CC carbon with custom build by local shop.
AaronWhitt82
New Member
Moe Ped
Well-known member
Lyric Ultimate
Super Deluxe ultimate
Code RSC
Santa Cruz carbon bar and 50mm Deity stem
The shop had bought this and a large R spec in and sold the R spec with all of the high end kit off this, so the shop were selling it as a CC but it fairly basic components so it didn’t sell. They were very good and gave a really good credit for the parts against the upgraded kit we put on.
Also the distribution of Santa Cruz in Australia is changing hands and they seemed to really want this gone, not sure why as they are still going to be selling them.
Super Deluxe ultimate
Code RSC
Santa Cruz carbon bar and 50mm Deity stem
The shop had bought this and a large R spec in and sold the R spec with all of the high end kit off this, so the shop were selling it as a CC but it fairly basic components so it didn’t sell. They were very good and gave a really good credit for the parts against the upgraded kit we put on.
Also the distribution of Santa Cruz in Australia is changing hands and they seemed to really want this gone, not sure why as they are still going to be selling them.
Heckler Sb130
Member
Anyone with a medium know the dropper length (Fox Transfer Factory). Looks to be 150mm by measuring but wanted to make sure. I’m 32 inseam with ~3” of seat post above the collar. Although it feels decent when lowered I prefer to use the 2-3” in the drop position. The seat post tube looks more shallow than my previous Heckler 27.5.
What dropper post options are out there to maximize the drop?
What dropper post options are out there to maximize the drop?
Last edited:
Desert_Turtle
Active member
The OneUp droppers have the shallowest insertion depth of any dropper. On one of my current Levos I was able to replace the 150mm dropper post with a 170 OneUp and the seat is at the same height, or lower, and I have a longer post.
If it helps, I'm on a medium running a 170mm AXS Reverb post, I can slam it in the frame although I run it around 30mm out.
Anyone else noticed that Santa Cruz updated both their Heckler and Bullit today after SRAM released their new drivetrains ?
I'm a little surprised as SC lowered their prices and are now including nicer build specs.
Bikes are now specced with Rockshox ZEB, Rockshox Reverb AXS, new SRAM XX drivetrain and new EP801 motor.
It's still not cheap, but I'm quite surprised!
www.santacruzbicycles.com
I'm a little surprised as SC lowered their prices and are now including nicer build specs.
Bikes are now specced with Rockshox ZEB, Rockshox Reverb AXS, new SRAM XX drivetrain and new EP801 motor.
It's still not cheap, but I'm quite surprised!
Heckler 9 - Electric Mountain Bike | Santa Cruz Bicycles | Buy Online Pick Up In Store
Our most popular ebike reimagined! MX or 29" wheels, a full suspension carbon frame, and 150mm of travel. Featuring a long-range 720wh battery and a Shimano EP8 motor. See full specs.
Silent Drone
Member
Anyone else noticed that Santa Cruz updated both their Heckler and Bullit today after SRAM released their new drivetrains ?
I'm a little surprised as SC lowered their prices and are now including nicer build specs.
Bikes are now specced with Rockshox ZEB, Rockshox Reverb AXS, new SRAM XX drivetrain and new EP801 motor.
It's still not cheap, but I'm quite surprised!
Heckler 9 - Electric Mountain Bike | Santa Cruz Bicycles | Buy Online Pick Up In Store
Our most popular ebike reimagined! MX or 29" wheels, a full suspension carbon frame, and 150mm of travel. Featuring a long-range 720wh battery and a Shimano EP8 motor. See full specs.
Thanks for pointing this out. Love the new colors!
I’m not surprised. And I’m so glad to see prices dropping. The cheapest “new” Heckler is now the 11.5k which comes with the new XO RSV with CC frame, ZEB, carbon rims, and new colors too.
If you can find one, you can get the “old” Heckler in R spec (C carbon frame, NX, lyric/36) for 7k. Not bad!
Nice, I was holding off the the heckler because of the widely reports clunk/clank when going coasting downhill with the Shimano EP800. I found one report of the new EP801 being much better on this front. If anyone rides one of these please report back.Bikes are now specced with Rockshox ZEB, Rockshox Reverb AXS, new SRAM XX drivetrain and new EP801 motor.
Heckler 9 - Electric Mountain Bike | Santa Cruz Bicycles | Buy Online Pick Up In Store
Our most popular ebike reimagined! MX or 29" wheels, a full suspension carbon frame, and 150mm of travel. Featuring a long-range 720wh battery and a Shimano EP8 motor. See full specs.
I really like the new SRAM transmission system, seems to make quite an improvement in the strength, alignment, and durability. Several reviews have shown people laying the bike down and standing on the derailleur. Definitely not something I'd ever try on my Nomad. I lost two frames (Cannondale crit bike and SC Blur) with derailleur related frame failures.
I had been leaning towards a Trek Fuel EXE, which is really quiet, but I'd *MUCH* rather stick with SC. The Heckler or Bullit would be my 3rd SC bike, 4th if you count a frame replacement where my frame snapped at the derailleur.
Chiefworm
Member
I have the Heckler with EP800 and after two rides totally zoned out the clattering which is not that bad anyway. The Bosch motor makes a noise as well. I would like to try the 801 as I understand it has a bit more power, but saying that EP800 does the job for me. Great bike.
Chiefworm
Member
I had this issue but had it replaced under warranty with fuss
leroy
Member
yep
mine feels constantly on the brink of being stuck.
its a shit design and a stupid place to put it.
Replaced with the shimano button without USB port? Do you know if it's a motor out job to replace, I'm getting a replacement sent out to me. Happy to do it just want to know what I'm getting into before hand.
Chiefworm
Member
It’s a motor out job. I also had all of the wires waterproofed and sticky foam rubber put around the gaps and battery cover. Bike is silent going over rough stuff now!
Silent Drone
Member
Me too. Mine’s on the brink. Trying to decide whether to take it in or just ride it until it fails.
leroy
Member
this is the other part of the heckler that irritates me.
worried that i might accidently knock it open with my foot without realising, i put a small piece of tape over mine while I'm riding it.
not sure if it is replaceable but would definitely be interested in buying a spare if they were.
Silent Drone
Member
I put the new XO on my Heckler last night. The installation process was straightforward, and the best part is you no longer have to set the b-screw at sag. Unfortunately, my shake down ride is going to have to wait because our trails are still buried in snow.
luna87824
E*POWAH Master
Shimano sent me a new charging port wiring harness when mine fell off.
EMTB Forums
Latest articles
-
Bosch-powered Merida is here – the eOne-Sixty SL and eOne-Eighty intro and test
Merida has used Bosch-motors for years, but not on the emtbs. The full...- Knut Nes
- 10 min read
- Views: 5K
- Reaction score: 5
- Comments: 9
-
Bosch ABS Pro and Trail Pro - an interview about the new ABS profiles
When testing the new Bosch Performance CX gen5, we were also introduced...- Knut Nes
- 2 min read
- Views: 6K
- Reaction score: 2
- Comments: 5